FCC ID: 2A6QH-KSFWCS02 Fast Wireless Charging Stand

WALNUT DOUBLE COIL FAST WIRELESS CHARGER C 3.0 C 2.0/ Q Q 2.USB 3.

| User Manual English Product Introduction CNC Qi EPP 15WQi WALNUT FAST WIRELESS CHARGER uses a walnut CNC shell, natural wood texture and texture, plus a simple and elegant appearance design, and supports up to Qi EPP 15W fast wireless charging experience. It is fully compatible with Qi standard mobile digital devices, and can achieve a wireless charging experience of "discharging and charging". Product Parameter KSFWCS02 DC 5V/2A 9V/2A 12/2A 5W/7.5W/10W/15W 15W 6mm 80%

74*87*110mm LED 5W FOD Model Input Output KSFWCS02 DC 5V/2A 9V/2A 12/2A 5W/7.5W/10W/15W Adaptive Output Power 15W Max Transmission Distance Charging Efficiency Product Size 6mm 80%

74*87*110mm Product appearance Charging Induction Area Charging Indicator Instructions For Use LED Status Prompt Green Breathing Light 5W Charging Blue Breathing Light Fast Charging Cyan Breathing Light Fully Charged Green Light Flashing Over Temperature Protection Blue Light Flashing FOD Protection Type C Silicone Anti-Slip Mat Type C Power Input Cyan Light Flashing Overvoltage Protection 1.USB 1.Connect the USB port of the charging cable to the power adapter. 2.USBType C3 3.

() 4.QC2.0/QC3.0 2. Connect the Type C interface of the USB charging cable to the wireless charger. After the power is turned on, the wireless charger indicator will flash 3 times. 3. Place the device to be charged that supports wireless charging on the wireless charger and charge it immediately. When the device starts to charge, the charging indicator will remain a green breathing light or a blue breathing light depending on the charging power.

(The indicator light will automatically turn off when the device that automatically emits a saturated signal is full. Not all devices will automatically turn off when they are full) 4. When using fast wireless charging wireless charging equipment, you need to use Qualcomm standard QC2.0/QC3.0 fast charging source adapter. 1 2 3 4 1 2 3 4 QC2.0/QC3.0 Light QC2.0/QC3.0 C 3.0 C 2.0/ Q Q QiQi 1. 1.Walnut single coil fast wireless charger Applicable Devices Digital devices that comply with the Qi standard can be compatible. More device models can be checked on the Qi official website. What's In The Box 2.USB charging cable 3.User manual Attentions 1. 2.0-45 3. 4. FCC FCC 15

(1)

(2) FCC 15 B

FCC 20 FCC 1. Please keep the product away from water and other liquids. 2. Please use this product at an ambient temperature of 0-45. 3. Do not severely impact, disassemble, repair, or modify this product by yourself. 4. Do not touch corrosive chemicals such as benzene and thinners. FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. authority to operate the equipment. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC RF exposure statement:

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body.

Copy of marking plate:

The artwork blow may be only a draft. Label for main units. Size:46.5*35mm

C5266091_X10_Ed.1 Shenzhen Ruihongxuan Electronics Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2A6QH-KSFWCS02 Date: 6/27/2022 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No No No No Short-Term Confidentiality No No No No No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Zhiqiang Chen Title: Product Manager Date: 6/27/2022 1/1

C5266091_X8_Ed.1 Letter of Authorization Company: Shenzhen Ruihongxuan Electronics Co., Ltd. Address: A-B-A-14A1, Modern Window, No.1078 North Huaqiang Rd., Huaqiang North St., Futian Dist., Shenzhen, China. Product Name: Fast Wireless Charging Stand Model Number: KSFWCS02 FCC Identifier: 2A6QH-KSFWCS02 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Zhiqiang Chen Date: 6/27/2022 Title: Product Manager Signature of applicant:

1/1