Wireless Earbuds Users Guide for Model IAEB29 v2276-01 Battery Charging Pull back the cover on the DC Power Input. Using a Micro-USB to USB cable, connect to the USB port of a powered on computer or USB power adaptor (not included). Initial charge time is approximately 2 hours. Charge fully before use. When the battery is low an indicator LED will flash red for 1 minute and a voice will announce Low Battery, then the unit will automatically power OFF. While the unit is charging it will display a solid red light. When the unit is fully charged it will display a solid blue light. Features Sweat proof Rubberized coating Bluetooth Wireless: range 33 ft. Active noise cancellation Built-in microphone Voice prompts announce earbud operations Digital volume control Built-in rechargeable battery: aprroximately 4 hrs playtime Micro-USB port for battery recharge Includes 3 pairs of eartips: 1 small, 1 medium, 1 large Micro-USB to USB charging cable FCC ID: 2AHI6NIAEBT29 Orientation & Controls (Right Earbud only) Volume / Skip Press and hold to adjust volume. Press to skip ahead or back. Power / Pair / Play / Pause /
Speakerphone Press and hold to power ON or OFF. Press and hold for 9 seconds to power ON and pair Bluetooth. Press to play or pause audio. Press to answer incoming phone call. Microphone DC Power Input Indicator LED Initial Bluetooth Connection 1. With the earbuds powered OFF, press and hold until they power ON and the voice prompt says Power on...Bluetooth is connecting. When pairing, remain within 3 feet of the Bluetooth device. 2. Using the controls on your Bluetooth device, select IAEB29 in the Bluetooth Settings to pair. If need be, refer to the users manual for your specific device for more information. 3. When successfully paired, a voice will announce Bluetooth is connected and the LED indicator will blink twice every few seconds. Audio from the connected Bluetooth device will now be heard through the earbuds. 4. Use the controls on the connected Bluetooth device to select and play audio. Use the earbud controls or the connected Bluetooth device to play, pause, and adjust the volume level. 5. After initial pairing, press and hold until the voice prompt says Power on. The earbuds will power ON and automatically connect to the Bluetooth device. Speakerphone 1. To accept a call, press the on the connected phone. button, or use the controls 2. To end a call, press the the connected phone. button, or use the controls on 3. To re-dial the last dialed number, press the twice. button Previously Connected Devices The earbuds can remember multiple Bluetooth devices and will always try to re-connect to the last device used. To re-connect to a different device, turn off Bluetooth on unwanted devices, then access the Bluetooth settings menu on the device you wish to use and select IAEB29. Troubleshooting If the earbuds should become unpaired or will not connect normally, follow these steps in your devices Bluetooth Settings Menu. 1. Delete the earbuds (Forget This Device). 2. Turn Bluetooth OFF then ON again, and repeat the Initial Bluetooth Connection steps. Customer Support Customer Service: 1-888-999-4215 | Email Support: prodinfo@
dpiinc.com | Email Parts: partsinfo@dpiinc.com For Warranty Information and the most up-to-date version of this Users Guide, go to www.iLiveElectronics.com To download this Users Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.com Para descargar este Manual del Usuario en ingls, espaol y francs, o para obtener respuestas a preguntas frecuentes, visite la seccin de apoyo en: www.iLiveElectronics.com Pour tlcharger ce guide de lutilisateur en anglais, espagnol ou franais, ou pour obtenir des rponses des questions frquemment poses, consultez la rubrique dassistance sur:
www.iLiveElectronics.com Made Green Copyright 2019 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice. FCC Warnings WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Additional Warnings WARNING: To prevent fire or shock hazards, do not expose this unit to rain or moisture. WARNING : Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable. Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of according to state and local guidelines. They should never be disposed of in normal household waste, and they should never be incinerated, as they might explode. Contact your local government for disposal or recycling practices in your area. To avoid hearing damage, make sure that the volume on your music player is turned down before connecting your headphones. After placing headphones in/on your ears, gradually turn up the volume until you reach a comfortable listening level. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. This product meets and complies with all Federal regulations.