FCC ID: 2AOVU-SN6BBAX 4K Set top box

FCC Warnning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. ISED Statement English: This device complies with Industry Canada licenseexempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, a nd (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES3 (B)/NMB3(B). French: Le prsentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradi olectriquesubi, mmesi le brouillageest susceptible d'encompromettre le fonctionnement. l'appareil numrique du ciem conforme canadien peut 3 (b) / nmb 3 (b). This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance. cet appareil est conforme l'exemption des limites d'valuation courante dans la section 2.5 du cnr - 102 et conformit avec rss 102 de l'exposition aux rf, les utilisateurs peuvent obtenir des donnes canadiennes sur l'exposition aux champs rf et la conformit. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Cet quipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrl.

Label & Label Location FCC ID: 2AOVU-SN6BBAX IC: 25669-IPA1114HDW Model: IPA1114HDW-02 Size: 45mm(L)*10mm(W) Label & Label Location FCC ID: 2AOVU-SN6BBAX IC: 25669-IPA1114HDW Model: SN6BBAO Size: 45mm(L)*10mm(W)

Difference description FCC ID: 2AOVU-SN6BBAX Model: IPA1114HDW-02,SN6BBAX(X=A TO Z) The 4K Set top box manufactured by Shenzhen SEI Robotics Co., Ltd. needs to apply for FCC certification. The applied models are as above. They are All the same except for the shape and color of cover, even the principle of the circuit, the electrical structure and all key components related to safety and electromagnetic compatibility are the same. The difference does not affect electromagnetic compatibility and safety. Company:

Name:

Jason Zhao Company:

Shenzhen SEI Robotics Co., Ltd. Address:

501, Block A, Productivity Building #5 Hi-tech Middle 2nd Road, Nanshan District, Shenzhen, China Phone:

86 0755-26613121 Fax:

86 0755-26734204 E-Mail:

zhaoys@seirobotics.net

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date: January 5, 2020 TO WHOM IT MAY CONCERN Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID Model name IPA1114HDW-02,SN6BBAX(X=A TO Z) 2AOVU-SN6BBAX For the product stated above, we request that the following information be held confidential;

Exhibits Long-Term Short-Term Short-Term Confidentiality Confidentiality Confidentiality Days 180 180 180 180 External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions Label and Label Location The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. 180 Sincerely, Name:

Jason Zhao Company:

Shenzhen SEI Robotics Co., Ltd. Address:

501, Block A, Productivity Building #5 Hi-tech Middle 2nd Road, Nanshan District, Shenzhen, China Phone:

86 0755-26613121 Fax:

86 0755-26734204 E-Mail:

zhaoys@seirobotics.net

Shenzhen SEI Robotics Co., Ltd. 501, Block A, Productivity Building #5 Hi-tech Middle 2nd Road, Nanshan District, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:

1/5/2020 We, Shenzhen SEI Robotics Co., Ltd., the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID:

2AOVU-SN6BBAX including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Signature Jason Zhao Attestation Engineer Shenzhen SEI Robotics Co., Ltd.

Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 UNII Device Declaration Letter To whom it may concern:

We have declared below featured for FCC equipment authorization, Device FCC ID2AOVU-SN6BBAX

(1) DFS Device:

Master N/A Client with Radar detection capability Client without radar detection capability,

(2) Active / Passive Scanning , adhoc mode access point capability Frequency Band

(MHz) Active Scanning (the device can transmit a probe (beacon)) passive scanning

(where the device is can listen only with no Ad Hoc Mode Capability Access point Capability 5745-5825 5755-5795 5775-5775 5180-5240 5190-5230 5210-5210 5260-5320 5270-5310 5290-5290 5500-5700 5510-5670 5530-5610 Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No probes) Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No

(3) Country code selection ability Yes If yes, pls explain how it was implemented:

No

(4) Meet 15.202 requirement Yes No pls check below :

A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

(5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non- DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. Apply

(If apply, pls help to provide explanation on it was implement, and how software was controlled) Does not apply Sincerely, Name:

Company:

Address:

Phone:

Fax:

E-Mail:

Jason Zhao Shenzhen SEI Robotics Co., Ltd. 501, Block A, Productivity Building #5 Hi-tech Middle 2nd Road, Nanshan District, Shenzhen, China 86 0755-26613121 86 0755-26734204 zhaoys@seirobotics.net

501, Block A, Productivity Building #5 Hi-tech Middle 2nd Road, Nanshan District, Shenzhen, Shenzhen SEI Robotics Co., Ltd. Date: January 5, 2020 China FCC ID: 2AOVU-SN6BBAX Model Number: IPA1114HDW-02,SN6BBAX(X=A TO Z) To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, Shenzhen SEI Robotics Co., Ltd., declare that this EUT (FCC ID: 2AOVU-SN6BBAX) doesnt have Ad Hoc mode function onnon-US/Canada frequencies. Inaddition.The frequency selection feature is disabled by firmware for devices marked to the US/Canada. For DTS part of this device, only channels 1-11 will be used in North America, Country code selection is disabled. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, Jason Zhao Shenzhen SEI Robotics Co., Ltd. 501, Block A, Productivity Building #5 Hi-tech Middle 2nd Road, Nanshan District, Shenzhen, China 86 0755-26613121 86 0755-26734204 zhaoys@seirobotics.net Name:

Company:

Address:

Phone:

Fax:

E-Mail: