Smart Mount AI Vacuum Fast Wireless Charging Car Mount Instruction Manual Product Description:
This product is an AI inductive vacuum wireless charger. It has exclusive national and international patents. It is the first electronic product with innovative technology through continuous research and development in this few years. This product complies with global industry standards and has passed all the safety testing and standards.
:
,,,
,,. Product Features:
Working Voltage: DC, 5V-12V Working Current: DC, >2A Output Power: 12V 15W, 9V 7.5W, 5V 5W Working Environment Temp.: -20 degree to 60 degree Working Humidity: 30% to 90%
Suction Pressure: Min -20KPA and Max -40KPA
:
: : 5V-12V
: : >2A
: 12V- 15W,9V-7.5W, 5V-5W
: -20 - 60
: 30%-90%
:( Min:-20KPA,Max:-40) How to set upSmart Mount/ Smart Mount A) Air vents Mount Works with horizontal or vertical air vent
/
1. Plug the cable into the Micro USB port 2. Engage the mount to the fin of air vent 1. Micro USB 2. B)Sticky Mount 1. Find a flat, smooth and safe *surface 2. Wipe the surface clean 3. Remove the clip and replace the standing mount into the product. 4. Peel off the protective layer of the sticker 5. Stick the mount onto the surface. 1.*
2. 3. 4. 5.
*DO NOT install the car mount over an air bag cover of within the airbag deployment zone
*
C) Charge your Oi-enabled device/ Q 1. Wipe the mounting surface clean. 2. Paste the PU iron sheet on the central area of the mounting surface.*
1. 2. PU *
*It is recommended to paste the PU iron sheet on the outer area of a lightweight protective case.
*
Product Using Guideline:
1. This product is suitable to use when in car, home and office. 2. Can connect the product with car, car charger or homethrough the standard 2A current data cable.
(Because this product supports fast charge function, we recommended the mobile or tablet must have and support QC3.0). 3. Put the phone or tablet on the silicone suction area of this product. (Pay attention that suck on the center position of the product, make the phone or tablet that without any gap and fully press on the suction.) Hold on 1 second and confirm that the product to be charged and has been firmly sucked on the wireless charger before leaving hand.
:
1.,,. 2. 2A
,(, QC3.0). 4.,(,,
,), , 1
!
Contains:
1. Smart Mount AI Vacuum Fast Wireless Charging Car Mount 2. GS-C0068 Car Charger Quick Charge PD+QC 3. Sticky Mount 4. Micro USB cable (0.8m with type C connector) 5. Instruction Manual 1. Smart Mount 2. GS-C0068 PD+QC 3. 4. Micro USB (0.8 type C ) 5. Specification:
Model: Smart Mount Input: 5V=2A, 9V=2A Wireless Output: 5V=1A, 9V=1A (10W Max.) Model: GS-C0068 Input: 12-24V 4A Output C: 5V=2.4A or 9V=2A or 12V=1.5A Output A: 5V=3A or 9V=2A or 12V=1.5A
:
: JS1021
: 5V=2A, 9V=2A
: 5V=1A, 9V=1A(10W Max.)
: JS1021A
: 12-24V 4A C: 5V=2.4A or 9V=2A or 12V=1.5A A: 5V=3A or 9V=2A or 12V=1.5A Precautions:
1. If the mobile phone has a protector casing when using this product, make sure the protector casing must be smooth and flat to prevent air leakage. 2. The reset time of this product is 1.5 seconds, dont take off the phone and putting it back in the phone in less than 1.5 seconds. In case the wireless charging will be misjudged. 3. It is strictly forbidden to block the air intake hole in the suction of the product. 4. It is strictly forbidden to use this product under the rated working conditions of this product. 5. If the product has been malfunctioned, please do not continue to use it.
:
1. ,,. 2. 1.5 , 1.5 . 3.. 4.. 5.,. WARNING 1. Avoid using the iron sheet with PU leather on other wireless charger, 2. Do not dismantle or modify the product:
3. Do not store the product in wet conditions 4. Make sure to remove metallic, magnetic protective case or chipcards like bank cards, etc from your device when charging 5. Do not keep or use the product near heat sources. 6. Do not let water or any other liquid flows into the inside part of the products interface. This would cause damages to the product:
7. Do not install the wireless car charger over an air bag cover or within the air bag deployment zone 8. While charging, the charger may heat up. This is normal and should not affect charger's performance. If the charger feels hot to the touch during this charging process, remove the device from the charger and allow it to cool down before restarting the chargingprocess 9. Avoid using bent or damaged USB cable 1. PU 2. 3. 4.() 5.;
6. 7. 8. 9. USB DISPOSAL OF ELECTRONIC PRODUCTS 1. Do not place the product as household waste 2. Please dispose of discarded electronic products properly according to local regulations. 1. 2. FCC Requirement changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cmbetween the radiator & your body. This transmitter must not be co-located or operating inconjunction with any other antenna or transmitter. this equipment does cause harmful interference in a residential If