FCC ID: 2AMNM-NC60 Wireless headset

Brand:LINNER MODEL: NC60 NS

MT eel rexstmaler-lektaid e Activate the phones voice assistant:

Long pressing MFB 2 seconds under connected(Mobile phone should be support Siri). Charging and Battery

@ Low battery indicate:

When the battery is low, you will hear beep and the indicator light changes into blink red. Low battery, blink red indicator light e-

@0ooo

@ Low battery and auto power off:

When battery reach the limit low, headset will power off automatically. You need to charge the headset now. NN Noise control switch V+/Backward Answer/Turn OfF Call/Play/Pause V-/Forward Indicator Light Default medium size, choose the right size ear tips for your ears. Operation Instructions e@ Power on e Press and hold the MFB key 3s still the blue indicator light start to blink. Press to power on

@0ooo

@ Power off Press and hold the Multifunction Button for 3 seconds till the indicator light turn red, then light of power off.

|| e000 |

Pairing Headset to Phones First time pairing:

Power on the headset and it default auto paring mode. While the Z e@ Charging state:

Indicator light is red during charging and it turns into blue when fully charged. Fully charged In charging

@ooo

Ca BTNC-100 headset come with a limited warranty of one (1) year starting from the date of delivery. Unless otherwise specified, this warranty covers the hardware components of the product as originally supplied and does not cover, or partially covers software, consumable items, or accessories even if packaged or sold together with the product. The limited warranty covers products defects caused by workmanship or building materials. For more details, please contact the seller. Warranty information Return Policy BTNC-100 headset are made to the highest standards and undergo rigorous testing. If you are not satisfied with your products for any reason, please contact seller for more details. Additional Information 1. To prevent hearing loss, please do not listen to music using earphone excessively. 2. Do not excessively tangle, bend, or stretch cables. 3. Do not pull on the cable to unplug the earphones. 4.To prevent infections, frequently clean the silicone earbuds. 5. Periodically clean the microphone to ensure it does not get clogged with dirt or dust. 6. For your personal safety, please do not use while driving, cycling, or crossing the street in order to prevent accidents. Built-in Battery Warning:

- Your product is powered by rechargeable battery. The full YY. indicator light flashes blue and red alternatively, activate Bluetooth on the phone, then set it to search for new devices and select TIK-A60 to pair. Not first time pairing:

Press and hold the Multifunction Button for about 5 seconds until indicator light flashes blue and red alternatively. Activate wireless on your phone, then set it to search for new devices and select BT-

NC-100 to pair. Automatic connection after power on:

When the headset is power on, it will automatically connect to the last device it connected. Earphone Specification Wireless Version: 2.1+4.2 Support Protocol: A2ZDP V1.3. AVRCP V1.5, HFPV1.5 Stereo Audio: sbc Communication Distance: 10m Music Time: +13hours( ANC ON) CallTime: 13+hrs Standby Time: 350 Hrs Charge Time: 1.5-2hrs Charge Voltage : dc5.0v Battery Type: lithium Polymer Battery (3.7v / 250mAh ) Driver Unit: 13.6mm dynamic drive Frequency Response: 20hz-20khz Chipset: BES2000- IS Call Mode

@ Answer and hang up call:

When a callin, press the Multifunction Button once to answer a call and press once as well to end it. Press once answer/hang up

ST eod0 e Reject a call When a call in, indicator light flashes, press and hold the Multifunction Button for a while to reject a call. press for a while

@ooo e Redial the last call:

Double press Multifunction Button in standby mode, The mobile phone will redial the last call number. e@ Third parties call

(It needs phone function and operators business support)

> When a new call from B rings during a call with A, Double the Multifunction Button to Double current call and answer the new call. Switch call between A and B: Double press the Multifunction Button once to switch between current call with A and on hold call performance of a new battery is achieved only after two or three complete charge and discharge cycles. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime.

- Always try to keep the battery between 0C 45C, (32F 113F)

. A product with a hot or cold battery may not work temporarily, even when the battery is fully charged.

- The battery used in the product may present a risk of fire or chemical burn if mistreated. Battery may explode if damaged.

- Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose the battery as household waste or ina fire as it may explode. FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has beentested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, /

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. with B. ( This function need phone and operators support. Some phones will end the call on this operation). Music Mode e@ Track Backward / Forward:

Press the volume ~ for 1soconds once to skip track backward, press volume + for 1 second once to skip track forward. Backward Forward e Play/Pause music:

Press Multifunction Button once to play/ pause music. e ANC Function:

ANC On: Press gold button and gree light turn on. ANC Off: Press gold button and gree light turn off.

C5266091_X10_Ed.1 Shenzhen Shengyuan Tech Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2019/12/27 Subject: Request for Confidentiality FCC ID: 2AMNM-NC60 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality Short-Term Confidentiality No No No No No No No No No No No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Ocean Xia 2019/12/27 Title: Manager 1/1

C5266091_X8_Ed.1 Letter of Authorization Shenzhen Shengyuan Tech Co., Ltd. Wireless headset Company: Shenzhen Shengyuan Tech Co., Ltd. Address: 309/Block C, Lan Guang Tech Park, No.6 Rd of Gaoxin North, Nanshan District Shenzhen China Product Name:

Model Number: NC60 FCC Identifier: 2AMNM-NC60 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name:

Title: Manager Date: 2019/12/27 Ocean Xia Signature of applicant:

1/1