IM Size 67 x 96mm, Open size: 402 x 192mm LOCATION OF CONTROLS (HEADPHONE) Model Name: MBH571H 1 2 3 4 5 6 7 1. 2. 3. 4. Microphone Button Button Button 5. Indicators 6. AUX IN Jack 7. Micro USB Port (For Charging only) POWER SOURCE OPERATION (HEADPHONE) The unit has a built-in Li-ion rechargeable battery, charge it before first time use or when it is drained as follows:
1. Connect the small plug from the supplied USB Connection Cable to the Micro USB Port on the unit. 2. Connect the full size USB Plug from the supplied USB Connection Cable to the USB Port on the Personal Computer or USB Charger
(Computer and USB Charger not included). 3. When charging, the Red Charging Indicator on the unit will illuminate. When charging is complete, it will turn off. NOTES:
Your battery will last longer if you following these simple guidelines for caring and storing. A. Before first time use, recharge the unit approximately 4 hours until the unit is fully charged. B. Charge and store the unit within the temperature range of 5C - 35C
(40F - 95F). C. Do not overcharge (longer than 24 hours). Excessive charging or running the unit completely flat will damage battery. Battery life will be extended if you keep the battery fully charged. D. Battery life naturally shortens slowly over time. E. The rechargeable battery incorporated in this product is not user replaceable. BT (BLUETOOTH) PAIRING:
For frist time use or re-pairing the unit to a new BT Device, pair as follows:
1. Press and hold the Button on the unit approximately 2 seconds to power on the unit. The Red & Blue indicators will illuminate and blink. 2. Power on the external BT Device and enter to BT searching mode. Start pairing following the on screen instructions from the external BT Device. When paired, the Blue lndicator will stop blinking and Red lndicator will turn off. 3. If pairing is complete you may now play music or answer the phone with your external BT Device. 4. During playback:
Press the Button to pause; press again to resume normal playback.
Press and release the or buttons to adjust volume level as desired.
Press and hold the or buttons repeatedly to skip tracks. 5. If the unit is paired to a Cell Phone:
When a call is incoming during an active music session:
Press the Button then speak to the Microphone to answer the call. When your call is complete, press the Button to disconnect or end the phone call and resume to music playback. Or, press and hold the Button approximately 1 second to decline the incoming phone call then resume to music playback.
Quick press the Button twice to redial the last telephone number your cell phone called. 6. To shut off the unit, press and hold the Button on the unit until Notes:
When the external BT Device searches for the unit, our model number MBH571H will appear on the display of external BT Device.
If while pairing you are asked for a code please try 0000 or 1234. Normal operation after paired:
1. Power on the external BT Device and enter to BT playback mode. 2. Press and hold the Button on the unit to power on the unit. The Red & Blue lndicators will illuminate and blink. 3. Wait a few seconds until the unit automatically pairs to the external BT Device. (The Blue lndicator will stop blinking and Red lndicator will turn off). 4. If pairing is complete you may mow play music or answer the phone with your external BT Device. AUX IN:
Listen from an external Audio Player such as MP3 Player, Discmanetc. as a traditions headphone:
1. In power off mode, connect one end of the supplied Audio Connection Cable to the AUX Out/Line Out/Phone Jack on the external Audio Player. SPECIFICATIONS (HEADPHONE):
Power Source: ....Built-in DC 3.7V; 200mAH (0.74WH) rechargeable Impedance of the Earbuds: ..........................32 ohm, 15 mW per Channel Audio power: .........................................15mW per Channel (Total 30mW) BT Version: .........................................................................................4.2 BT Operation Distance: ...................................Up to 32 Feet in open area PACKAGE INCLUDES:
1 x Owners Manual 1 x USB Connection Cable (For Charging Only) 1 x Audio connection Cable with 3.5mm Stereo Plugs SPECIFICATIONS AND ACCESSORIES ARE SUBECT TO CHANGE WITHOUT NOTICE 2. Connect the other end to the AUX IN Jack on the unit as illustrated on right. 3. Play the music on the connected Player as usual. (Make sure the volume level of the connected Audio Player is turned to high level.) volume; skip tracks . Etc. To AUX IN Jack on the unit To the AUX Out /
Line OUT / Phone Jack on the external Audio Player 4. Using the controls on the connected external Audio Player to adjust NOTE: When the Audio Connection Cable inserted into the AUX IN Jack, the unit will automatically shut off. Unplug the cable from the unit before use BT (Bluetooth). 2 3 4 5 6 7 LOCATION OF CONTROLS (EARPHONE) Model Name: MBH571E 4 2 4 3 1 POWER SOURCE (EARPHONE) OPERATION (EARPHONE) The unit has a built-in Li-ion rechargeable battery, charge it before first time use or when it is drained as follows:
1. Connect the small plug from the supplied USB Connection Cable to the Micro USB Port on the unit. 2. Connect the full size USB Plug from the supplied USB Connection Cable to the USB Port on the Personal Computer or USB Charger
(Computer and USB Charger not included). 3. When charging, the Red Charging Indicator on the unit will illuminate. When charging is complete, it will turn off. 5 6 NOTES:
Your battery will last longer if you following these simple guidelines for caring and storing. A. Before first time use, recharge the unit approximately 4 hours until the unit is fully charged. B. Charge and store the unit within the temperature range of 5C - 35C
(40F - 95F). C. Do not overcharge (longer than 24 hours). Excessive charging or running the unit completely flat will damage battery. Battery life will be extended if you keep the battery fully charged. D. Battery life naturally shortens slowly over time. E. The rechargeable battery incorporated in this product is not user replaceable. BT (BLUETOOTH) PAIRING:
For frist time use or re-pairing the unit to a new BT Device, pair as follows:
1. Press and hold the Button on the unit approximately 2 seconds to power on the unit. The Red & Blue indicators will illuminate and blink. 2. Power on the external BT Device and enter to BT searching mode. Start pairing following the on screen instructions from the external BT Device. When paired, the Blue lndicator will stop blinking and Red lndicator will turn off. 3. If pairing is complete you may now play music or answer the phone with your external BT Device. 4. During playback:
Press the Button to pause; press again to resume normal playback.
Press and release the or buttons to adjust volume level as desired.
Press and hold the or buttons repeatedly to skip tracks. 5. If the unit is paired to a Cell Phone:
When a call is incoming during an active music session:
Press the Button then speak to the Microphone to answer the call. When your call is complete, press the Button to disconnect or end the phone call and resume to music playback. Or, press and hold the Button approximately 1 second to decline the incoming phone call then resume to music playback.
Quick press the Button twice to redial the last telephone number your cell phone called. 6. To shut off the unit, press and hold the Button on the unit until Normal operation after paired:
1. Power on the external BT Device and enter to BT playback mode. 2. Press and hold the Button on the unit to power on the unit. The Red & Blue lndicators will illuminate and blink. 3. Wait a few seconds until the unit automatically pairs to the external BT Device. (The Blue lndicator will stop blinking and Red lndicator will turn off). 4. If pairing is complete you may mow play music or answer the phone with your external BT Device. SPECIFICATIONS (EARPHONE):
TROUBLESHOOTING Power Source: ....Built-in DC 3.7V; 55mAH (0.2035WH) rechargeable Check the following before requesting service:
Impedance of the Earbuds: ............................32 ohm, 5 mW per Channel Audio power: .........................................5 mW per Channel (Total 10mW) BT Version: .........................................................................................4.2 BT Operation Distance: ...................................Up to 32 Feet in open area PACKAGE INCLUDES:
1 x Owners Manual 1 x USB Connection Cable (For Charging Only) SPECIFICATIONS AND ACCESSORIES ARE SUBECT TO CHANGE WITHOUT NOTICE SYMPTOM Cant power on No sound or sound weak POSSIBLE CAUSE POSSIBLE SOLUTION Built-in battery drained Recharge the battery Volume of the unit was set to minimum position Increase the volume level of the unit Volume level of paired BT device is in low level Rise the volume level of the paired BT device Sound distortion Volume level too high Reduce the volume level of the unit Volume level of the paired BT device too high Reduce the volume level of the paired BT device BT not Functioning The external BT device had NOT paired to the unit Pair the external BT device The external BT device too far from the unit Place the external BT device close to the unit Button Button Button 1. 2. 3. 4. Indictors 5. Micro USB Port (For Charging only) 6. Microphone Notes:
When the external BT Device searches for the unit, our model number MBH571E will appear on the display of external BT Device.
If while pairing you are asked for a code please try 0000 or 1234. 8 9 10 11 12 13 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.