40" HD Soundbar with Bluetooth Wireless Users Guide for Model ITB490B v2503-01 For the most up-to-date version of this Users Guide, go to www.iLiveElectronics.com Safety Instructions & Warnings FCC Warnings Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Important Safety Instructions Read these Instructions. Keep these Instructions. Heed all Warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over. 2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE D' LECTROCUTION NE PAS OUVRIR WArNINg: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. WArNINg : This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings. ca.gov. This product meets and complies with all Federal regulations. Battery Warnings WARNING: Do not ingest the battery, Chemical Burn Hazard. If the remote control supplied with this product contains a coin/button cell battery and the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. Iff the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside and part of the body, seek immediate medical attention. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. WARNING: There is a danger of explosion if you attempt to charge standard Alkaline batteries in the unit. Only use rechargeable NiMH batteries. Battery shall not be exposed to excessive heat such as sunshine, fire or the like. Do not mix old and new batteries. Completely replace all old batteries with new ones. Do not mix alkaline, standard (carbon-zinc), or rechargeable
(ni-cad, ni-mh, etc) batteries. Batteries should be recycled or disposed of as per state and local guidelines. Additional Warnings and Precautions CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely. CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. WARNING: Use of this unit near fluorescent lighting may cause interference regarding use of the remote. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause. WARNING: Shock hazard - Do Not Open. Caution and marking information is located at the rear or bottom of the apparatus. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain, moisture, dripping, or splashing. Objects filled with liquids, such as vases, shall not be placed on the apparatus. 3 Table of Contents Setup 5 Orientation 6 Remote 8 Bluetooth Wireless 9 Pairing a Bluetooth Device for the First Time Playing Audio Wirelessly Audio Inputs 10 Company Information 12 Features & Specifications Includes Power Remote Battery Front View Rear View Speaker Inputs Detail Speaker Controls (Right Side) Stereo RCA Inputs (Aux In) Optical Input Line In Contact Information Warranty International Support 4 Features & Specifications Includes Remote control with 1 CR2025 battery Optical cable AC/DC power adapter Wall-mount hardware and instructions Setup 40" length Supports Bluetooth Wireless range: 60 ft. 2.2 channel stereo sound 2 stereo speakers 2 woofer speakers Digital volume control Full-function remote Optical digital audio input Aux In (3.5mm audio input) RCA stereo audio inputs Power L AUX IN R OPTICAL IN DC IN Plug the small end of the power cord into the DC Input on the back of the speaker, and the large plug into a standard wall outlet. Remote Batteries Requires 1 CR2025 battery (pre-installed). N E P O OPEN 5 Orientation Front View Function/Source Indicators: Power | Line In | Optical | RCA/Aux In | Bluetooth Remote Receiver StAtuS Power Off Line In Mode Optical Mode RCA/Aux In Mode Bluetooth Pairing Bluetooth Connected InDICAtOR Red Light Green Light Amber Light White Light Flashing Blue Light Blue Light Rear View L AUX IN R OPTICAL IN DC IN Speaker Inputs Wall Mount Pegs 6 Speaker Inputs Detail L AUX IN R OPTICAL IN DC IN Speaker Controls (Right Side) Source/Power Press to power the unit ON. Press and hold to power the unit OFF. Press to switch between Optical, RCA/Aux In, Line In, and Bluetooth modes. Volume +/-
Press to adjust volume up or down. Pair Press to begin pairing to a Bluetooth device. Line In Connect the soundbar to an audio device using a 3.5mm audio cable. DC Power Input Optical Input Stereo RCA Audio Inputs (AuX In) SOURCE/
VOL +
VOL PAIR LINE IN 7 POWER SOURCE MUTE LINE IN OPTICAL AUX MUSIC MOVIE DIALOG TREBLE BASS VOLUME Mute Press to mute the volume. Music Press to switch to the EQ optimized for music. Movie Press to switch to the EQ optimized for movie sound. Dialog Press to switch to the EQ optimized for dialog. Skip Back/Fwd In Bluetooth mode, press to skip the selected track. Play/Pause In Bluetooth mode, press to play or pause the selected track. Press and Hold to pair. Remote Power Press to turn the unit on or off. Press to switch to Bluetooth Mode. Line In Press to switch to Line In mode. Optical Press to switch to Optical mode. AuX Press to switch to RCA/Aux mode. treble Press to adjust the treble up or down. Bass Press to adjust the bass up or down Volume Press to adjust the volume. 8 Bluetooth Wireless Initial Bluetooth Connection and Playing Audio 1. Power on the sound bar by pressing the Power button. A voice will say, "Bluetooth", and the LED indicator will slowly flash blue. When pairing, remain within 3 feet of the Bluetooth device. 2. Using the controls on your Bluetooth device, select ItB490 in the Bluetooth Settings to pair. If need be, refer to the user's manual for your specific device for more information. 3. When successfully paired, a voice will annouce, "Bluetooth is connected", and the LED indicator will turn solid blue. Audio from the connected Bluetooth device will now be heard through the speaker. 4. Use the controls on the connected Bluetooth device to select and play audio. Use the speaker controls or the connected Bluetooth device to play, pause, and adjust the volume level. 5. After initial pairing, press the Power button until the voice prompt say, "Power on". The speaker will power ON and automatically connect to the last Bluetooth device used. note: If your device should become unpaired or you find it is unable to connect, press & hold the Play button to enter to Pairing Mode. A voice will announce, "
"Bluetooth is connecting", and you can connect to the speaker manually. Note: This sound bar has last function memory. After powering OFF, it will resume the last play button to switch it ot Bluetooth Mode mode when powering ON agin. Remember to press the before connecting`. Previously Connected Devices The sound bar can remember multiple Bluetooth devices and will always try to re-connect to the last device used. To reconnect to a different device, turn off Bluetooth on unwanted devices, then access the Bluetooth settings menu on teh device you wish to use and select ItB490. 9 Audio Inputs Stereo RCA Inputs (Aux In) When connecting two products using an RCA cable (not included), match the colored ports to their corresponding plugs. 1. Connect the RCA cables (not included) to the RCA Stereo Inputs located on the back of the unit, and to the audio outputs on a television or other audio source. 2. Press the Power button to power on the unit. 3. Press the Source button to select Aux In, indicated by a white light. 4. Audio played through the television will now be heard through the speakers. Optical Input You will need: An audio source with an Optical Audio Output and a Digital Optical Audio Cable (included). 1. Connect the Digital Optical Audio Cable to the optical output on the audio source and to the Optical Input on the speaker bar. 2. Press the Power button to power the unit on. 3. Press the Source button repeatedly to switch to SPDIF Mode, indicated by a amber light. 4. Using the native controls on your connected device, make sure the audio settings are set to PCM or Optical Audio and are turned On. 5. Audio from the connected audio source will now be played through the speakers. Important tips for optical audio:
Use the correct toslink cable and make sure that it is firmly seated in both source and sound bar sockets. Optical output is activated on the source (they should see a red light emitting from the toslink socket). It may be labeled SPDIF in the setting menu of the source. The optical output is set to output PCM and not Dolby Digital. Line In 3.5 mm audio input cable not included. 1. Plug one end of a 3.5 mm audio input cable into the Line In on the unit and plug the other end of the cable into the audio output/headphone output on an MP3 Player or other audio source. 2. Press the Power button to power the unit on. 3. Press the Source button to select Line In, indicated by a green light. 4. Audio played through the connected device will now be heard through the speakers. Use the controls on the connected device to play, pause, or skip selected tracks. 10 Stereo RCA Inputs (Aux In) - Detail L AUX IN R OPTICAL IN DC IN Optical Input - Detail L AUX IN R OPTICAL IN DC IN Line In Line In - Detail SOURCE/
VOL +
VOL PAIR LINE IN SOURCE/
VOL +
VOL PAIR LINE IN 11 Customer Support Contact Information Website: www.iLiveElectronics.com Email Support: prodinfo@dpiinc.com Email Parts: partsinfo@dpiinc.com Phone Support: 1-888-999-4215 Warranty For Warranty Information and the most up-to-date version of this Users Guide, go to: www.iLiveElectronics.com International Support To download this Users Guide in English, Spanish, and French, or to get answers to frequently asked questions, visit the support section at:
www.iLiveElectronics.com Made Green Protect for Today Sustain for Tomorrow Para descargar este Manual del Usuario en ingls, espaol y francs, o para obtener respuestas a preguntas frecuentes, visite la seccin de apoyo en: www.iLiveElectronics.com Pour tlcharger ce guide de lutilisateur en anglais, espagnol ou franais, ou pour obtenir des rponses des questions frquemment poses, consultez la rubrique dassistance sur: www.iLiveElectronics.com Copyright 2020 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice. 12 Warning:
changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. RF Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.