4.1 Home Theater System with Bluetooth Users Guide for Model ITBSW241 v2971-01 For the most up-to-date version of this Users Guide, go to: www.iLiveElectronics.com Safety Instructions & Warnings CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE D' LECTROCUTION NE PAS OUVRIR WARNING: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. WARNING: DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD. Important Safety Instructions Read these Instructions. Keep these Instructions. Heed all Warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 2 FCC Warnings Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complied with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Additional Warnings and Precautions CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected form the mains socket outlet completely. WARNING: Shock hazard - Do Not Open. Caution and marking information is located at the rear or bottom of the apparatus. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain, moisture, dripping, or splashing. Objects filled with liquids, such as vases, shall not be placed on the apparatus. CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment WARNING: Do not place this unit directly onto furniture surfaces with any type of soft, porous, or sensitive finish. As with any rubber compound made with oils, the feet could cause marks or staining where the feet reside. We recommend using a protective barrier such as a cloth or a piece of glass between the unit and the surface to reduce the risk of damage and/or staining. WARNING: Use of this unit near fluorescent lighting may cause interference regarding use of the remote. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Battery shall not be exposed to excessive heat such as sunshine, fire or the like. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. Do not mix old and new batteries. Completely replace all old batteries with new ones. Do not mix alkaline, standard (carbon-zinc), or rechargeable
(ni-cad, ni-mh, etc) batteries. Batteries should be recycled or disposed of as per state and local guidelines. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body. 3 Table of Contents Setup Features & Specifications - 5 Power - 5 Remote Battery - 5 Includes - 5 Orientation Rear View - 6 Front View - 6 Source Mode Indicator LED - 6 Speaker Controls - 6 Connecting the Satellite Speakers - 7 Connecting the Subwoofer - 7 Remote Functions & Controls - 8 Connecting Devices Initial Bluetooth Connection and Playing Audio - 9 Troubleshooting - 9 Aux In - 9 Learn Feature -10 Company Information Contact Information - 12 International Support - 12 Warranty - 12 4 Features & Specifications Supports Bluetooth 5.0, range: 60 ft. Includes Remote control with CR2025 battery AC/DC power adapter 3.5mm to RCA cable Setup 4.1 channel stereo sound Digital volume control Full-function remote Aux In (3.5mm audio input) Bluetooth QDID : 115952 Power Plug the power adapter for the soundbar into the DC Input on the back of the soundbar and a standard wall outlet. Remote Battery Requires 1 CR2025 battery (pre-installed). 5 Orientation Rear View Speaker Inputs: Audio Outputs (to speakers) | Sub Audio Output | DC Power Input Front View Function/Source Indicators: Power | Bluetooth | Aux In Bluetooth Standby/Pairing Quick Flashing Blue Light INDICATOR LIGHT Red Light Solid Blue Light Green Light SOURCE/
VOL +
VOL PAIR/LEARN AUX IN Source Mode Indicator LED STATUS Power Off Bluetooth Connected Aux In Mode Speaker Controls Power/Source Press to power the unit ON. Press and hold to power the unit OFF. Press to switch audio source to Bluetooth and AUX In modes. Volume Press to adjust volume. Pair/Learn With the unit powered ON, press and hold to enter pairing mode manually. With the unit powered OFF, press to begin using the learn function. Aux In 3.5mm audio input. 6 Connecting the Satellite Speakers Connect each satellite speaker to the two satellite speaker inputs on the rear of the sound bar. Note: If there is no sound from satellite speakers, please make sure the sub and satellite speakers are correctly connected. Sound bar Satellite Speakers Connecting the Subwoofer Connect the subwoofer to the output labled "Sub Out" on the rear of the sound bar as seen below. NOTE: To reduce unwanted vibration, try place the subwoofer on a solid or padded surface, such as the floor or carpet. 7 Remote Functions & Controls Power Press to turn the unit on or off. Press to switch to Bluetooth Mode. Aux Press to switch to Aux In mode. Skip In Bluetooth mode, press to skip forward or back one track. Play/Pause In Bluetooth Mode, press to play or pause audio tracks. Press and hold to pair to a Bluetooth device. POWER MUTE SOURCE AUX MUSIC MOVIE DIALOG TREBLE BASS VOLUME Mute Press to mute the volume. The indicator on the sound bar will flash. Press and hold to reset treble and bass to default level. Music Press to switch to the EQ optimized for music. Press and hold Music for 5 seconds to turn voice prompts ON/OFF. Movie Press to switch to the EQ optimized for movies. Dialog Press to switch to the EQ optimized for dialogue. Treble Press to adjust the treble up or down. Bass Press to adjust the bass up or down. Volume +/-
Press to adjust the volume. 8 Connecting Devices Initial Bluetooth Connection and Playing Audio 1. When first powered ON the unit defaults to Bluetooth mode. A voice will say, Bluetooth, and the LED indicator will quickly flash blue. When pairing, remain within 3 feet of the Bluetooth device. 2. Using the controls on your Bluetooth device, select ITBSW241 in the Bluetooth Settings Menu to pair. If need be, refer to the users manual for your specific device for more information. 3. When successfully paired, a voice will announce, Bluetooth is connected, and the LED indicator will turn solid blue. Audio from the connected Bluetooth device will now be heard through the speaker. 4. Use the controls on the connected Bluetooth device to select and play audio. Use the speaker controls or the connected Bluetooth device to play, pause, and adjust the volume level. 5. After initial pairing, anytime the speaker powers ON it will automatically connect to the last Bluetooth device used. Note: If your device should become unpaired or you find it is unable to connect, press and hold the Play button (on remote), or Pair button (sound bar) to enter to Pairing Mode. A voice will announce, Bluetooth is connecting, and you can connect to the speaker manually. Note: This sound bar has a last-function-used memory; it will resume using the last mode before it was turned OFF after it is turned ON again. Troubleshooting If the sound bar should become unpaired or will not connect normally, follow these steps in your devices Bluetooth Settings Menu. Delete the sound bar (Forget This Device). Turn Bluetooth OFF, then ON again, and repeat the Initial Bluetooth Connection steps. Aux In Requires a 3.5mm audio cable (included). device. 1. Connect the 3.5mm to RCA cable to the 3.5mm Aux in on the sound bar and the other end into your TV or other 2. Power ON the sound bar and press Source on the sound bar or Aux on the remote to select Aux In Mode. A voice will announce the source mode and the indicator will turn green. 3. Use the controls on the connected device to select and play audio. Be sure the volume on your connected device is audible when you begin playing. SOURCE/
VOL +
VOL PAIR/LEARN AUX IN 9 Learn Feature What Is the Learn Feature?
The Learn feature captures remote commands from your television remote, and teaches your soundbar to operate when these commands are pressed. Power, volume and mute are a few examples of commands that the bar speaker can learn. Why Use the Learn Feature?
Teaching the bar speaker remote commands will reduce the number of remotes needed, save time searching for remote codes, and improve the ease of operation. Note: Not all functions of the sound bar will be available through your own remote control, such as bass and treble. Use the included remote for these functions. While your ITBSW241 sound bar is able to learn most IR protocols, not all can be programmed. Using the Learn Feature 1. With the power Off, press the Learn/Pair button on the unit. An indicator will flicker red. 2. Press the button you desire to be learned on the included remote. For example: Volume +
3. The red light will continue to flicker, and another indicator will display a blue light. 4. Press the corresponding button on your remote. 5. The red light will continue to flicker, and another indicator will display a green light. 6. When the green light turns off, the button command is saved. 7. The programmed button on your remote will now be able to control your sound bar. Note: It is necessary to program each button i.e. channel and volume + and - separately. 8. To start over, press and hold the Learn/Pair button for 5 seconds. If the sound bar has failed to learn a command, the orange light will flicker, and another indicator will display a blue light. Please try again with a different remote. 10 11 Company Information Contact Information Website: www.iLiveElectronics.com Email Support: prodinfo@dpiinc.com Email Parts: partsinfo@dpiinc.com Phone Support: 1-888-999-4215 Warranty For Warranty Information and the most up-to-date version of this Users Guide, go to:
www.iLiveElectronics.com International Support To download this Users Guide in English, Spanish, and French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.com Para descargar este Manual del Usuario en ingls, espaol y francs, o para obtener respuestas a preguntas frecuentes, visite la seccin de apoyo en: www.iLiveElectronics.com Pour tlcharger ce guide de lutilisateur en anglais, espagnol ou franais, ou pour obtenir des rponses des questions frquemment poses, consultez la rubrique dassistance sur: www.iLiveElectronics.com Made Green Protect for Today Sustain for Tomorrow Copyright 2021 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice. 12