Wire-Free Battery-Powered 1080P Indoor & Outdoor Home Security Camera User Manual B1 T1 Battery Camera We keep improving the app, if the app interface is not accordance with the instructions, please go to wansview website: http://www.wansview.com for the latest instructions. Whats in the Box Battery camera Base bottom Base station Power adapter Weathproof cover Installation guide Magnetic wall mount 3M tape Mounting screws&Anchors 2 Product Diagram(Base Station) Sync Button WiFi Pair Button Speaker Memory card slot Indicator Light Microphone Base Station Speaker Microphone Micro Memory Card Internet Connection Max Number of Connected Cameras Adapter Power Dimensions Weight Working Environment Built-in 1W 8 Built-in Up to 128GB Wire-Free Connection 4 5V 2A 60*31.5*81.9mm 54g
-10C to 50C / 14F to 122FRH95%
3 LED Indicator & Working Status(Base Station) LED indicaton OFF Solid on in red Flashes red&blue slowly alternately Solid on in blue Flashes blue slowly Flashes red quickly working status Sleep mode/Power Off NO Internet WIFI configuration connected to internet pairing mode Restore to factory setting Button Controls(Base Station) Botton function operation Wi-Fi Configuration Button Pair with the WIFI Sync Button pair with the camera Press and hold 5 seconds to enter pairing mode with the LED indicator flashing red&blue slowly Press and hold 6-8 seconds to enter pairing mode with the LED indicator flashing blue slowly press the Wi-Fi Configuration Button
& Sync Button at the same time Restore to factory settings press and hold for 3 seconds 4 Product Diagram(Camera) Microphone 2.0 MP Lens Photoresistance Motion sensor Speaker Indicateor light Base Sync Button Micro USB Night vision LED Battery compartment Screw Button Battery Cover Camera Lens Sensor Resolution Microphone Speaker PIR Detection Battery life Weight Adapter Power Internet Weather Proof Dimensions Working Environment 105wide angle ,f=2.0 1/2.7 inch 1080P(1920*1080)Full HD Resolution Built-in Built-in 1W 8 Detection angle110 Two 18650 Lithium batteries(not include) last up to,Battery life will vary based on device settings, usage, and environmental factors. Actual results may vary. 193g 5V 2A or Two 18650 Lithium batteries
(not include ) 2.4G Wi-Fi, Effective Range IP65 61.8*61.8*130.2mm
-10C to 50C / 14F to 122F RH95%
5 LED Indicator & Working Status (Camera) LED indicaton OFF solid on in red flashes red & blue slowly solid on in blue working status Sleep mode/Power Off Connected the Base station or charge the camera pairing mode fully charged Button Controls(Camera) Botton Sync Button function pair with the Base station operation Press and hold 10 seconds to enter pairing mode with the red&blue LED indicator flashing red&blue slowly Caution Use the included power adapters only to charge the camera and the base station within the permitted voltage range. Only the camera is waterproof. The base station and adapters are for indoor use only. Make sure the internet is functional and fast for live data feed. Do not use the product at temperatures higher or lower than the specified range. Do not use in environments with strong electromagnetic interferences or near corrosive substances. The warranty does not cover defects and damages caused by misuse, unauthorized dismantling, or natural hazards. The 18650 battery life varies according to the frequency of the triggers and the video resolution settings. The PIR motion sensor can only detect motions within a certain ranges and will not be activated by motions out of the range 6 Get Started Download APP 1 Go to the App Store or Google Play to search and download wansview APP to your smart phone or tablet. 2 Or scan below QR code to get the APP. 7 Power On Base Station 1 Connect the base station to a power source. 2 Please make sure the base station is in the same room,close to the router,before performing the setup. Note:
The LED indicator on the base station will keep blue when connected to the internet successfully. 8 Power the Camera 1 Please install two 18650 lithium batteries in the camera before use. 2 Coming with micro USB connector on the battery, the wifi camera can be charged by universal 5V 2A phone adapter,Save your money for new batteries continuously.(No power adapter packed in). PRESS tips:In order to extend the working time of the battery, please turn off the motion sensor when using it outdoors. Connect Base Station to Network Connect your mobile phone with 2.4G WiFi. (5G is not supported for the camera)If you are using a dual band router, make sure your 2.4G WiFi name is different from your 5G one. 1 Launch Wansview App, Click on Add Battery Camera. 2 Select [Add Base Station via WiFi method]
3 Click on [Start to sync Base Station]
9 4 Long press [WiFi Pair Button]
on the Base station until you hear
[Please Sync the Base Station to the Router], then Click on [Red and Blue lights flash alternately]. 5 Scan the QR code on the back of the Base Station. 5 Name Base Station, then click on [Next]
10 7 Your home WiFi will be located, please input your WiFi password correctly. Click on [Connect to WiFi]. 8 Base Station will try to connect 2.4G, and you will hear [Received WiFi Information] from the Base Station 9 Once the Base Station is connected, you will hear
[Succeed to Connect Router
] and Add Base Station Successfully. 11 Sync Battery Camera to Base Station 1 Click On [Start to pair Battery Camera]. 2 Ensure that the camera is inserted workable battery or plugged with power supply, then click on
[Continue]. 12 3 Long Press the [Sync Button] on Base Station until the blue light starts flashing and hear
[Entering Sync Mode]. Then long press the [Sync Button] on Battery Camera until the red&blue lights flash at the same time. Click on [Finish] When you hear [Sync Succeed] and Base Station will be Online. 13 Click On the portrait of the Base Station, it will automatically jump to the page list and display the current channel and power. Clicking in will display the current battery camera online. Low power Charging Tip: When the battery is low, it may affect the use of your camera. Please replace the battery or power the camera. 14 Full screen view Exit video Flip monitor Intercom Screen capture Mirror Video Mirror flip 16 15 On the wall(Camera) Fasten the mounting screws into the wall and attach the magnetic mount. When you are mounting the camera to drywall, be sure to use the plastic anchors. On a desktop or a shelf 18 17 On the wall(Base Station) Common FAQ 1.When the APP prompts low battery, some functions may not start. Reply:Please replace the battery or power the device in time. 2. When the base station cannot connect to the router Reply: Is the base station too far away from the router, check if the mobile APP is updated, and the password is correctly entered when pairing, please check the wireless password. 3. The battery camera cannot be paired successfully with the base station. Reply: Is it too far away, please close and reconnect 19 801RTB, 802RTB, 803RTB, 804RTB, B1, B2, B3, B4 Manufacturer's Name: Shenzhen Smarteye Digital Electronics Co.,Ltd. Sample Description: Battery Camera Trade Mark: N/A Model number:
Operating Temperature: 10 C to 40 C This product is a fixed location. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the users body and the device, including the antenna. Use only the supplied or an approved antenna. This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out. 1. CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS 2. The device complies with RF specifications when the device used at 20cm from your body This product can be used across EU member states FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. FCC ID: ZCB-801RTB LET US KNOW WHAT YOU THINK Thank you so much for your order and trust to Wansview.Please feel free to contact us if you have any questions about the product application. As a young and growing company, it would mean the world to us if you could leave an honest review about our product and services. US/CA: service2@wansview.com UK:service3@wansview.com US/CA:service2@wansview.com UK:service3@wansview.com Facebook: www.facebook.com/WansviewClub/
Youtube: https://www.youtube.com/channel/UCPRXQcIkLsMAWQtpGxVx_jw The instruction is for reference only. Slight differences may be found in the user interface.All the designs and software here are subject to change without prior written notice. For latest instructions, please go to www.wansview.com to download.