FCC ID: ZCBHYIPC-540D04W IP Camera

BB SSeerriieessRRoobboott MMooddeell IIPP CCaammeerraa 2011-7 V4.18 UUsseerr MMaannuuaall IP CAMERA User Manual Index 1 INTRODUCTION ........................................................................................................................... 4 1.1 1.2 1.3 THE PACKAGE INCLUDES .......................................................................................................... 4 FUNCTION AND FEATURES ........................................................................................................ 4 TECHNICAL PARAMETERS ......................................................................................................... 5 2 APPEARANCE AND INTERFACE ............................................................................................. 6 2.1 2.2 APPEARANCE ............................................................................................................................ 6 INTERFACE OF EQUIPMENT ....................................................................................................... 6 3 VISIT IP CAMERA FROM LAN .................................................................................................. 7 3.1 3.2 3.3 LAN CONNECTION ..................................................................................................................... 7 SEARCH AND SET THE IP ADDRESS OF THE IP CAMERA ............................................................... 7 VISIT IP CAMERA ..................................................................................................................... 8 3.3.1 Video Play Area ................................................................................................................... 9 4 VISIT IP CAMERA FROM WAN ............................................................................................... 10 4.1 WAN CONNECTION ................................................................................................................. 10 PORT FORWARDING ................................................................................................................ 11 4.2 4.3 DDNS .................................................................................................................................... 11 4.3.1 Manufacturers DDNS ....................................................................................................... 11 4.3.2 Third Party DDNS ............................................................................................................. 12 5 OTHER SETTINGS ..................................................................................................................... 12 5.2 5.1 NETWORK SETTING ................................................................................................................ 12 5.1.1 Basic Network Setting ........................................................................................................ 12 5.1.2 WIFI Setting ....................................................................................................................... 12 5.1.3 ADSL Setting ...................................................................................................................... 13 5.1.4 UPnP Setting...................................................................................................................... 13 5.1.5 DDNS Setting ..................................................................................................................... 14 5.1.6 MSN Setting ....................................................................................................................... 14 ALARM SETTINGS ................................................................................................................... 14 5.2.1 Alarm Setting ..................................................................................................................... 14 5.2.2 Mail Service Setting ........................................................................................................... 16 5.2.3 FTP Service Setting ........................................................................................................... 17 5.2.4 Alarm Server ...................................................................................................................... 17 ADVANCED ............................................................................................................................. 18 5.3.1 User Setting ....................................................................................................................... 18 5.3.2 Multi Device Setting........................................................................................................... 18 5.3.3 Other settings ..................................................................................................................... 19 5.4 MAINTAIN ............................................................................................................................... 20 5.3 2 IP CAMERA User Manual 5.4.1 Device Information ............................................................................................................ 20 5.4.2 Time Setting ....................................................................................................................... 20 5.4.3 Firmware upgrade ............................................................................................................. 20 5.4.4 Restore Factory Default ..................................................................................................... 20 5.4.5 User browsing Log ............................................................................................................. 21 6 CENTRALIZATION CONTROL ................................................................................................ 21 FAQ ............................................................................................................................................... 21 FCC STATEMENT ....................................................................................................................... 23 7 8 3 IP CAMERA User Manual 1 Introduction The IP Camera combines a high quality digital video camera with network connectivity and a powerful web server to bring clear video to your desktop from anywhere on your local network or over the Internet. 1.1 The package includes IP Camera * 1 IP Camera Utility CD *1 5V Power Adapter *1 Stand of plastic * 1 Cable * 1 NOTEIf you select the device with wifi function, it has built-in wifi module and transmitting antenna in package. 1.2 Function and Features With built-in Microphone, it enables user to monitor the sound on the site. User can also connect this equipment to the speaker, and it supports two-way intercom function. It was equipped with pan/tilt function, horizontally 350and vertically 100. Its outlook is smart, easy and convenient to install in many sites. Support 802.11b/g protocol, can build up wireless monitoring. Infrared LED for night vision covers 5m area, to realize 24 hours monitoring. Motion detection and alarm pin can be connected to external sensors to detect environmental situation. Alarming record can be stored by email, FTP server. External alarm can be open when detecting something unusuality. It adopts the TCP/IP network protocols and has inner web server. Users can browse video through IE and other browsers. Data is transferred through one port; it is easy for user to do the network setting. Support mobile phone to view. Manufacture attaches a label at the bottom of each IP Camera, providing free DDNS. When IP Camera is connected to the internet, this DDNS can be used to visit the device. Manufacture provides free software, support Multi-view, Long time recording, video replay etc. 4 IP CAMERA User Manual 1.3 Technical Parameters Item Image Capture Pan/Tilt Assistant Sub Item Sensor Total of pixel Minimum illumination Lens Pan Coverage Tilt Coverage Description CMOS sensor 300k IR on0 Lux f=3.6mm, F=2.0, Fixed Iris 350 100 Lighting 8pcs 850nm Infrared LEDs, 5m distance Lighting Control Auto control Resolution 640*480(VGA)/320*240(QVGA)/160*120(QQVGA) Compression Video and Frame rate Audio Bit rate MJPEG 30fps 128kbps ~ 5Mbps Mirror /Flip ADPCM TCP/IPUDP/IPHTTPSMTPFTPDHCP DDNSUPNPNTPPPPOE 802.11b/g support support support Email/FTP/external alarm/send message to alarm server Three levels support Upgrade from network A free DDNS provided by manufacturer 10Base-T/100base-TX 1 way 1 way Built-in Mic and External Mic interface Image Rotation Audio Compression Basic Protocol Other Protocol Video control Dual way audio Motion Detection Triggered Actions User Setting Date/ Time Setting Upgrade DDNS Ethernet Alarm In Alarm Out Audio In Audio Out Built-in Speaker and Audio Line-out interface x 1 Weight Main body Power Power consumption Operating temperature Operating 245g 111mm(L)*107mm(W)*121mm(H) DC 5V

<6W

-20~ 50 10% ~ 80% non-condensing Network Other Features Hardware Interface Physical Index 5 IP CAMERA User Manual temperature OS Supported Microsoft Windows 98/2000/XP/Vista/7 etc. Software(PC Browser Side) Application Software Internet Explorer6.0 and Above or Compatible Browser, Firefox, Safari etc. IPCMonitor.exe 2 Appearance and interface 2.1 Appearance Figure 1 NoteStatus Indicator: the green light is to show that the device is running, Slow flicker one per 2 secondindicates the device is searching for network; flickerone or twice per second,indicates the wired network connected; Frequent flicker2~3 times per second, indicates wireless network connected. 2.2 Interface of Equipment Figure 2 RESET Button: Press the RESET button and hold on more than 10 seconds, the equipment will restart and recover to the factory default settings. 6 IP CAMERA User Manual 3 Visit IP Camera from LAN 3.1 Lan connection Figure 3 3.2 Search and set the ip address of the ip camera Run BSearch_en.exe in the CD, the setting interface as figure 4. Figure 4 Operation Steps:

1) Click Search (F3) 2) Choose the device 3) Change the ip address of the ip camera according to the information in the red frame on the left. The numbers in the red circle should not be the same. 4) Put the user name and password into Authentication (By default, the user name 7 IP CAMERA User Manual is: admin, password is: 123456). 5) Click Update 6) After successfully update, click Search (F3), choose the device and click Browse

(F4). Then you may view the ip camera, like figure 5. NOTE:

1) If you dont know how to fill out the content of IP config, you could also tick the Set IP automatically to get the IP address from the router automatically. 2) If you have the firewall software in your PC, when you run the BSearch_en.exe, it may pop up a window to say whether you want to block this program or not, then you should choose not to block. 3) The default ip address is 192.168.0.178 and default http port is 80. Figure 5 3.3 Visit IP Camera We suggest using IE kernel browser to view the video it can provide more functions, but user need to install Player before viewing the video. Click download and install player (first use) link, it will popup dialogue box as Figure 6, click Run, it will automatically download player and install. Figure 6 8 3.3.1 Video Play Area After install the plug-ins, click Mode 1 to view link in Figure 5 to view the video (video as Figure 7). IP CAMERA User Manual 1) Main Menu Figure 7 The main menu includes the function setting of different submenu 2) Status Displaying Area In right up corner, it is the status displaying area, to show the 9 devices status:

if not connected, button is gray if connected, button is green If wrong connected , button is yellow If alarm , button is red 3) Multi Channel displaying area If users add multi channelrefer to 5.3.2, when shift to 4-Ch, 9-CH, and it will automatically show other devices. You select one device, and you can operate it by these keys: play, stop, and record, control Pan/tilt, etc. These buttons mean start video, stop, monitor, talk, record and snapshot. P.S.: If you want to click this button to record the video, please go to advancedOther Settings to set the Record Path first. Please see below figure8. 9 IP CAMERA User Manual 4) PT and video control Figure 8 In Pan/Tilt control area, user can control the position according to the arrow sign: up, down, left, right, middle, horizontal cruise, vertical cruise, and stop etc. Means open IO output and Close IO output. User can also set the device frame rateresolution, brightness, contrast and other parameters. 4 Visit IP Camera from WAN 4.1 Wan connection Figure 9 10 IP CAMERA User Manual 4.2 Port forwarding If visit IP Camera from WAN, you must do port forwarding on the router. Take Netgear router for example. Figure 10 Operation Steps:

1) After login the interface of the routerchoose Port Forwarding 2) Choose Add custom Service Input IP camera port Input IP camera IP addressclick Applythe http port and ip address should be the same as figure 4 which set by you own) 3) 4) Note: Different router has different settings for port-forwarding; please kindly follow your router guide to do the port-forwarding. After the port-forwarding is done, you could view the IP Camera from WAN now. 4.3 DDNS You could also use the manufacturer DDNS to view the device as long as your port-forwarding succeeds. 4.3.1 Manufacturers DDNS Device manufacturer has provided a free DDNS. User can find it in network menu, like 11 figure 11. IP CAMERA User Manual Figure 11 4.3.2 Third Party DDNS User can also use third part DDNS, such as www.dyndns.com User must apply a free domain name from this website and fill the info into the below blanks (Figure 12) and save the settings. Then the domain name can be used. Figure 12 Note: Using the third party domain name, if the http port is not 80, the port number should be adding to the domain name with colon. Example: http://btest.dyndns.biz:81. While manufacturer DDNS is no need to add PORT. 5 Other Settings 5.1 Network Setting 5.1.1 Basic Network Setting The user can also enter the Basic Network Settings to set the IP address except using the search software. See below Figure 13. Figure 13 5.1.2 WIFI Setting If the device is with WIFI, enter the Wireless LAN Setting, just as below Figure 14 shown, click the Scan button, it will show you all the wireless networks detected in the Wireless Network List column. Select one of them and tick Using Wireless Lan, then the relevant 12 data of the selected wireless network will be shown in the following blanks. Put in the password and click Set, then the WIFI setting is finished. IP CAMERA User Manual Figure 14 Note1: When the device is connected both WIFI and wired, it will firstly connect to the wired network, if it cant connect to it, then it will change to connect to the wifi. The IP address and port is the same, either wireless or wired network. Note2: Before you do the configuration of wireless as shown above; please make sure the device is connected to the network via network cable. After settings succeed, please reboot the device and wireless function takes effect. 5.1.3 ADSL Setting User could enable the ADSL Dialup according to the below Figure 15 (The ADSL provider will assign the user name and password to you when you apply for ADSL service.) Connect the device directly to the ADSL modem and it is connected to the Internet. Figure 15 5.1.4 UPnP Setting If you enable UPNP, once the IP camera is connected into the LAN, it will communicate with the router in the LAN to do the port-forwarding automatically. Below Figure 16, tick Using UPNP to Map Port and the setting are completed. You could check the UPNP succeeds or not in the interface of System Maintenance. Figure 16 13 Before using UPNP function, please make sure the routers UPNP function has been triggered. Not all the routers support UPNP perfectly. Please test if the router works well with the equipment, if not, we would suggest you to disable this function and do the IP CAMERA User Manual port-forwarding manually. 5.1.5 DDNS Setting Please refer to the content in 4.3. 5.1.6 MSN Setting Figure 17 User needs to apply for a MSN account for this device first, for example:

test1@hotmail.com. Please put this MSN account and its password as above Figure 17. Then put your MSN account, for example: friend1@hotmail.com, into the MSN Friends List. Then on your friend1@hotmail.com MSN list, you can see test1@hotmail.com is online. You just send url? to test1@hotmail.com and you will get the WAN ip address of this ip camera. But please make sure test1@hotmail.com and friend1@hotmail.com should be MSN friends before you do the settings. 5.2 Alarm Settings 5.2.1 Alarm Setting 1 Alarm Detect User can select the motion detection. If there is any motion, it will detect the motion and trigger the alarm. In the motion detect sensibility, the larger the figure, the more sensitive. As showed in Figure 18, if any external alarm detector is connected, user will be able to tick Alarm Input Armed. If the external alarm detector is an always on switch alarm, please choose open. If the external alarm detector is always off switch alarm, please 14 choose close. IP CAMERA User Manual Figure 18 2 Alarm Action All kinds of alarm modes:-

IO interface for alarm signal output: when relay is switched on, the external alarm will begin to alarm. Send alarm info by email. Send the site pictures to the FTP server, user can also set the break time between two pictures. Send alarm info to the alarm server. 3 Scheduler Device will trigger alarm in scheduled time. User can set schedule time to be all the time. Before you set Schedule, please go to Date and Time settings to set the correct time for the item, as shown in figure 19. 15 IP CAMERA User Manual 16 Figure 19 5.2.2 Mail Service Setting Figure 20 IP CAMERA User Manual The device will send alarm email to you. You only need to fill out the blanks with your email address as shown in Figure 20. After the setting, please click save and test to check if it works properly. If it is properly set, user can tick to enable Report Internet IP by mail. After every restart, the device will send its Internet IP address to users email address. 5.2.3 FTP Service Setting Figure 21 When alarming, device will snap and send the image to FTP server, please make sure the FTP setting is correct. Above Figure 21 of FTP setting for your reference, after the setting is finished, click Test to test your settings are correct or not. After correct setting FTP server, you can use upload Image Periodically function. Even no alarm, device can also send the snap image to FTP periodically. In order to use FTP function, user should apply username and password on the FTP server first. And please apply some storage, and the authority to write and create sub-category into it. 5.2.4 Alarm Server Please confirm if you have connected to alarm server. The alarm message format as Figure 22 follow:

GET /api/alarm.asp username=username&

17 IP CAMERA User Manual userpwd=password&

rea=alarm type (1=Motion Detection, 2 =Alarm from Alarm in port)&

io=0 Alarm server needs developing by user. User can extend other functions on this server, like SMS, MMS alarm, and mobile phone etc. 5.3 Advanced 5.3.1 User Setting There are three levels of authority; they are Administrator/Operator/Visitor. Administrator have the highest authority, it can do any change to the settings. Operator account only can operate the IP camera, cant do changes to the settings. Visitor account only can watch the video, cant do any operation to the IP camera. By default, the administrators user name is admin, password: 123456. 5.3.2 Multi Device Setting Figure 23 18 IP CAMERA User Manual Figure 24 As Figure 24, User can maximum add 9 devices to view the device simultaneously. Click refresh button to check the device in the LAN. When click the device, will popup setting dialogue box and input the device info, as figure 25 and click save. After that, must click submit button to save. Figure 25 5.3.3 Other settings You can choose open or close indicator LED. If set PTZ center on start Yes, when start device, Pan/Tilt will move to center and then stop. You can also set the Horizon patrol rounds and vertical patrol rounds, when you click patrol on the view interface, it will round according to your setting rounds. You can also set PTZ rate, 0 means fastest. Figure 26 19 5.4 Maintain 5.4.1 Device Information IP CAMERA User Manual Figure 27 5.4.2 Time Setting If the device is connected to the Internet, you enable the NTP server to correct the time and select the right time zone. Or you should use the PCs time to correct its time. Figure 28 5.4.3 Firmware upgrade The device runs 2 kinds of programmer, one is system firmware, the other is application firmware. They could be upgraded separately. Figure 29 5.4.4 Restore Factory Default Click Restore Factory Default, it will pop up a dialogue to confirm if you really want to restore the factory default. After confirmation, the system will restore the factory default 20 IP CAMERA User Manual and reboot. 5.4.5 User browsing Log After enter the log interface, you could view who and when the device is visited. Figure 30 6 Centralization Control Figure 31 IPCMonitor is a free software offered by factory, several devices on LAN and WAN can be browsed at the same time. The software also supports snap, video record, alarm and so on. The below Figure 31 is the interface. For more information, pls. refer to the <<IPCMonitor User Manual>> in CD. 7 FAQ 1) Unmatched power adapter will damage the equipment or power adapter When plug in the power adapter, please check carefully the voltage, it should be 5V 21 IP CAMERA User Manual adapter for this equipment. 2) Slowly browse speed This equipment adopts MJEPG compression format, it needs large network bandwidth, the narrow bandwidth will affect the browse speed. The typical bandwidth uses situation as below:

640x480@10fps : 4.0 Megabits 5.0 Megabits 320x240@30fps : 1.2 Megabits 1.6 Megabits 3) Color difference The default is infrared lens, when visit outdoor or strong infrared light scenes, there are color differences, the color is not accordance to the real scenes. User can change it to color lens to solve this problem, but color lens can only use under the daylight situation. 4) Cant find equipment via search software after connect to LAN Make sure the equipment and PC is in the same LAN; if install firewall software, please close it and try again. 5) Can find equipment via search software, but cant visit If the IP address of IP camera and PC is not in the same Network Segment, you should change them on the same Network Segment before visit. Network Segment is the first three number of IP address. If the IP address of PC is 192.168.0.100, so it can only visit the equipment which IP address is between 192.168.0.1~192.168.0.255. 6) Can visit via public IP address, but cant visit via manufacturers domain name Make sure the DNS setting is same as your PC, as below Figure 33, in the search tool, the DNS 1 and DNS 2 on both side should be same. Figure 32 22 IP CAMERA User Manual 8 FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help. RF exposure statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 23