Feedback
(screeching, stac)
*The camera and monitor may be too close together;
*The volume on the monitor may be set too high;
*Press the reset key at the back of Parent unit;
Cannot hear the baby on the parent unit Image frozen
*Volume seng may be too low;
*Press the reset key at the back of Parent unit;
*Restart the baby unit (plug out the adapter then plug it into the socket again);
*Press the reset key at the back of parent unit
(hide behind the stand);
All rights reserved The features described in users manual are subject to modications without prior notice. WARNING:
Keep the small parts from away children 11 Printed in China 2.4GHz Digital Wireless Video Baby Monitor User Manual WARNING:
Keep the small parts from away children The features described in users manual are subject to modications without prior notice. Thank you for purchasing this baby monitor . We will try to give you the best products and service . Congratulaon!
Now you can take care of your babies anywhere and anyme ! Please read the user manual before you use !
Please retain your original dated sales receipt for your records. For warranty service of your baby monitor, you will need to provide a copy of your dated sales receipt to conrm warranty status. Registraon is not required for warranty coverage. Before you use the product, we recommend you to fully charge the baery in the parent unit, so that it connues to work if you disconnect it from the power supply to carry it to another locaon. Please read the Safety instrucons. Please make sure you have the following in this packing. 1. Parent unit x 1;
2. Baby unit x 1;
3. Adapter x 2;
4. User manual x 1;
1. SAFETY INSTRUCTIOINS :
CAUTION: Keep small parts away from children. Strangulaon Hazard: Children can become entangled in cords. Power cords should be kept more than 3 feet away from the crib and baby's reach all the me. Baby monitors and cameras with power cords should never be hung on or near the crib. This product is not a toy and should be kept out of children's reach. This product contains small parts. Exercise care when unpacking and assembling he product. Read and keep instrucons: All the safety and operang instrucons should be read before the video baby monitor is operated. Rechargeable baery for monitor Model:503450;
3.7V, 950 mAh, 3.515Wh ;
Operang me with baery fully charged
(parent unit) Up to 12 hours (ECO on) Image sensor type 1/6.5' Color CMOS image sensor IR LED Type 940 nm FCC ID RX:2AKVZ-SM32RX;
TX:2AKVZ-SM32TX 10. TROUBLE SHOOTING No recepon on the monitor Interference or poor recepon
*The power adapters may not be properly connected;
*Conrm that the camera and monitor are ON;
*Camera may be far away from the monitor;
*Camera and monitor may not be properly paired; follow PAIRING instrucons;
*Restart Baby unit and Parent unit;
*Press the reset key at the back of Parent unit;
*Move the monitor close to the camera;
*The camera or monitor may be placed too close to many metal objects;
*Other electronic devices may be interfering with the signal;
*The baery power may be too low;
*Restart Baby unit and Parent unit;
*Press the reset key at the back of Parent unit;
1 10 8.5 TEMPERATURE UNIT SETTING 1. Press the Menu/Eixt key and the menu will pop up;
2. Press the LEFT key or RIGHT key unl the temperature icon is highlighted then press OK key to enter into sub-menu;
3. Press Le key or Right key to select between or ;
4. Press OK key to conrm;
8.6 BRIGHTNESS SETTING 1. Press the Menu/Eixt key and the menu will pop up;
2. Press the LEFT key or RIGHT key unl the brightness icon is highlighted then press OK key to enter into sub-menu;
3. Press Le key or Right key to select desired brightness level ;
4. Press OK key to conrm;
9. TECHNICAL DATA 9.1 System General Frequency 2.4GHz FHSS Type of Moduiaon GFSK Transming Power Operaon Environment 18dBm Max Indoor use only; Temperature: 0-40 C ;
Humidity: 5% to 90% rh. ( relave humidity) Operang Range Up to 900 feet (straight line and open space) Power adapter Input: 100-240VAC 50 / 60Hz,300mA Max;
Output: 5V, 700mA;
LCD 3.2'' TFT LCD 9 This product cannot replace responsible adult supervision. Water and moisture: This product is designed for indoor use only. The unit should not be exposed to rain, moisture, dripping or splashing. No objects lled with liquid should be placed on top of, or beside the product, such as a glass or vase. This item should not be used near water. DO NOT: Use the appliance if the cord or plug is damaged . If your baby monitor is not operang properly or has suered any damage, contact service center to request inspecon and repair it in order to avoid any possible risk. DO NOT: Aempt to repair or adjust any of the electrical or mechanical funcons of the unit since, if you do, the guarantee will be made void. Venlaon: This baby monitor should not be used on a bed, sofa, rug or similar surface that may block the venlaon openings, or be placed in an enclosed area, such as a bookcase or drawer that may impede air ow. Keep away from sources of heat: This unit should not be exposed to direct heat sources such as a candle, replace, radiator, heat register, stove or other appliance that emits heat. The unit should not be le in direct sunlight. Power source: This unit should only be used with the AC power adapters included in this package (rated 5V 600mA). Damage requiring service: This unit should be serviced by qualied personnel . FCC STATEMENTS:
This device complies with part 15 of the FCC Rules. Operaon is subject to the following two condions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operaon. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no 2 guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separaon between the equipment and receiver.
-Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modicaons to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment of and on, the user is encouraged to try to correct the interference by one or more of the following measures:
*Reorient or relocate the receiving antenna.
*Increase the separaon between the equipment and the receiver.
*Connect the equipment into an outlet dierent from that to which the receiver is connected.
*Consult the dealer or an experienced radio/TV technician for help. 4. Press OK key to conrm;
8.2 ALARM SETTING You can use the alarm to remind yourself to feed baby /change diapers /
sleep, etc. 1. Press the Menu/Eixt key and the menu will pop up;
2. Press the LEFT key or RIGHT key unl the alarm icon is highlighted then press OK key to enter into sub-menu;
3. Press Le key or press Right key to select desired alarm;
4. Press OK key to conrm;
Note : If the alarm is ringing and no one to answer, then the ringing will last 1 minute and then stop , aer 3 minutes the ringing will start again. The ringing will sound up three mes total if no one answer. 8.3 LULLABY SETTING You can soothe the baby to sleep by playing a gentle lullaby from the baby unit. 1. Press the Menu/Eixt key and the menu will pop up;
2. Press the LEFT key or RIGHT key unl the lullaby icon is highlighted then press the OK key to enter into sub-menu;
3. Press Le key or Right key to select desired lullaby;
4. Press OK key to conrm;
8.4 PAIRING THE CAMERA AND MONITOR 1. Press the Menu/Eixt key then the menu will pop up;
2. Press the LEFT key or RIGHT key unl the camera icon is highlighted then press OK key to enter into sub-menu;
3.Press Le key or Right key to select the desired camera to pair;
4. Press OK key to start the pairing ;
5. While the LED is ashing then press the PAIR buon on the back of camera;
6. Once paired, then the screen will display the image from the camera. 7. If unsuccessful, please repeat above steps. 3 8 7.4 CAMERA VIEW / SCAN
(only have paired two or more cameras have this funcon) Press OK key to view / scan camera;
During scan mode, the scan icon will be displayed on the top of screen. And each cameras' video will be stay on the LCD around 10 seconds then change to next camera;
7.5 TALK TO BABY To talk, press and hold the talk key on the front of the monitor. Release the buon when you have nished talking to listen to the sound from the baby's room again . Bear in mind that you can't listen to your baby whilst you're talking to them; to listen to it, you will have to stop pressing this buon. 7.6 INFRARED NIGHT VISION(Automac) The infrared night vision funcon allows the camera to pick up images of your baby or the monitored area in dark or low light condions. In this mode, only black and white images will be displayed on the monitor , the opmum image is 6 feet distance between baby unit and object. 8. MENU OPERATION 8.1 ECO SETTING This mode allows you to control the sound acvaon of your baby monitor. The ECO default seng is OFF. If there is no sound around the camera within 30 Seconds, it will stops transming. The monitor screen turns o when the camera is not transming. When the camera detects the sound is louder than set sensivity level it will start transming the signal to the monitor again. To change the ECO level, please follow the next instrucons:
1. Press the Menu/Eixt key and the menu will pop up;
2. Press the LEFT key or RIGHT key unl the the ECO icon is highlighted then press OK key to enter into the sub-menu;
3. Press the LEFT key or RIGHT key to select desired level;
ECO 7 2. WARRANTY TERMS We take quality very seriously. This is why all of our products come with a one year warranty from the original purchase date against defects in workmanship and materials. If you have warranty or support issues please contact the store where you purchased , or contact the Amazon seller. 3. Important guidelines for installing your baby monitor.
*To use your parent unit and baby unit together, you must be able to establish a radio link between them, and the range will be aected by environmental condions.
*Any large metal object, like a refrigerator, a mirror, a lling cabinet, metallic doors or reinforced concrete between the baby and parent unit may block the radio signal.
*The signal strength may also be reduced by other solid structures, like walls, or by radio or electrical equipment, such as TV, computers, cordless or mobile phones, uorescent lights or dimmer switches.
*Use of other 2.4GHz product, such as wireless networks (Wi-Fi routers), Bluetooth systems, or microwave ovens, may cause interference with this product, so keep the baby monitor away at least 5(1.5m) from these types of products, or turn them o if they appear to be causing interference. 4. PRODUCT OVERVIEW 4.1 Parent unit overview:
Power & Charging LED Volume LED Speaker Power key Zoom Talk to baby OK & Scan V+ / Right key Menu/Exit V- / Left key MIC 3.2 LCD Screen Reset key(under stand) DC-jack 4 4.2 Baby unit overview:
Light sensor Speaker CMOS sensor Infrared LEDs MIC Pair key USB-Jack Temperature sensor 4.3 ICONS OVERVIEW:
---- Signal
---- Alarm
---- Lullaby
---- Camera
----- Volume
---- Brightness
------ ECO
---- Baery ECO
----- Zoom
----- Night vision
------ Talk to baby Temperature 28 5. PLACEMENT OF THE BABY MONITOR:
Aim to provide the viewing area: Select a locaon for the camera that provides a clear view of the area you want to monitor, which is free from dust, and is not in line-of-signt to a strong light source or direct sunlight. Avoid installing the camera where there are thick walls or obstrucons between the camera and the monitor. STRANGULATION HAZARD--keep cord out of childs reach. Never place camera or cords within 3 feet of crib or playpen. NEVER use extension cords with AC adapters. only use the AC adapters provided. 5 6. Using the baby monitor 6.1 TURN ON THE BABY UNIT:
*Only use the A/C adapter included in this package (5V, 700mA);
Use the provided AC adapter to connect the wall outlet with the baby unit;
Once the adapter connects then the unit will turn on automaclly and the power LED will light up. 6.2 TURN ON THE PARENT UNIT:
*Only use the A/C adapter included in this package (5V, 700mA);
*The parent unit is supplied with a built-in rechargeable Li-ion baery. We suggest to connect the monitor to the adapter plugged into the mains whenever possible, in order to keep the baery charged;
Press and hold the power key on the Front side of the parent unit;
Once parent unit turned on , the power LED will light up and the image will display on the LCD screen;
7.0 OSD MODE OPERATION 7.1 PARENT UNIT SCREEN ON/OFF Short press the power key to turn on / o the screen. 7.2 VOLUME ADJUSTMENT Press the Right key to increase the volume;
Press the Le key to decrease the volume;
7.3 DIGITAL ZOOM & PAN / TILT Press Zoom key to operate Zoom in / out;
At the Zoom mode , press the navigaon key to Pan/Tilt the image;
During digital zoom mode, the zoom icon will be displayed on the top of screen. Warm reminder: If you want to adjust the volume/Brightness, you have to exit the Zoom mode before your operate it. 6