all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User Manual | Users Manual | 1.14 MiB | July 11 2022 | |||
1 2 |
|
Internal Photos | Internal Photos | 1.92 MiB | July 11 2022 | |||
1 2 |
|
External Photos | External Photos | 2.53 MiB | July 11 2022 | |||
1 2 |
|
Label & Location | ID Label/Location Info | 488.63 KiB | July 11 2022 | |||
1 2 |
|
Attestation Letter | Attestation Statements | 79.27 KiB | July 11 2022 | |||
1 2 | Block Diagram | Block Diagram | July 11 2022 | confidential | ||||
1 2 | Circuit Description | Operational Description | July 11 2022 | confidential | ||||
1 2 |
|
FCC Long Term Confidential Authorization Form | Cover Letter(s) | 81.81 KiB | July 11 2022 | |||
1 2 |
|
Power of Attorney Letter | Cover Letter(s) | 77.81 KiB | July 11 2022 | |||
1 2 |
|
RF Exposure | RF Exposure Info | 165.81 KiB | July 11 2022 | |||
1 2 | Schematics | Schematics | July 11 2022 | confidential | ||||
1 2 |
|
Test Report | Test Report | 2.51 MiB | July 11 2022 | |||
1 2 |
|
Test Setup Photos | Test Setup Photos | 1.01 MiB | July 11 2022 | |||
1 2 | U-NII Software Security Description | Operational Description | July 11 2022 | confidential | ||||
1 2 | Operation Description | Operational Description | July 11 2022 | confidential |
1 2 | User Manual | Users Manual | 1.14 MiB | July 11 2022 |
J1Safety Guidelines en de fr es it ja ko zh-Hans 1 4 7 10 13 16 18 20 en Disclaimer Make sure that anyone who uses this product knows and understands the contents of this Safety Guidelines and the Quick product for safety purposes. Start Guide. (The Safety Guidelines and the Quick Start Guide will hereinafter be referred to as the Guides, which are available at operating this product. and assistance.
- Ensure that bystanders also read and understand all the safety notes of this product and keep bystanders away while operating this
- Stay alert, watch what you are doing and use common sense when https://support.snapmaker.com.)Failure to observe the Guides may
- Do not use this product while you are tired or under the influence of lead to personal injury, inferior results, or damage to the product. drugs, alcohol or medication. When using Snapmaker products, you should comply with the following requirements:
-Follow the instructions of the Guides, the applicable laws and regulations, and the safety regulations in the assembly, handling, storage, use, maintenance, or disposal of this product.
-Ensure there is no infringement on any third-party intellectual property rights or violation of any applicable laws or regulations when making objects using this product.
- Do not reach inside the machine or touch the moving parts while the machine is still in operation, as it may cause injury.
- Do not leave the machine unattended while it is still on. In all UK and EU member states, the operation of 51505250 MHz is restricted to indoor use only. The conditions or methods of using Snapmaker products are beyond the control of Snapmaker. For this reason, Snapmaker does not assume responsibility and expressly disclaims liability for any of the following occurs:
Turn off the machine immediately and stop using this product, if any consequences resulting from:
-your improper methods, failure to follow the instructions of the Guides or impacts of other uncertain factors when operating this product;
- You notice a smell of burning at any point.
- You see any damage to the interior components of this machine.
- The machine stops working unexpectedly.
- Unusual lights, sparks, or sounds come out of this machine, which
-your infringement on any third-party intellectual property rights were not occurring previously. or violation of any applicable laws or regulations when making
- You notice any abnormality in this machine. objects using this product;
personal injury, inferior results, or damage to the product arising 3D Printing Safety out of or in connection with the assembly, handling, storage, use,
- Do not touch the nozzle, PEI glass plate and heated bed when the maintenance, or disposal of this product. machine is printing or heating.
- Always unplug the power cable from the electrical outlet before No part of the Guides may be reproduced, edited, or revised by performing maintenance. any means without the prior written permission of Snapmaker. Snapmaker reserves the right to modify or revise the Guides at our sole discretion at any time without notice. You can download the up-
to-date version of the Guides on our official website: https://support. snapmaker.com. Intended Use aeronautics. Safety Notes Snapmaker 3D printers are intended for use under the guidelines provided in the Guides. When making objects using Snapmaker 3D printers, users remain responsible for qualifying and validating the application of the created object for its intended use, especially for applications in strictly regulated areas like medical devices and General Safety Information
- Follow the applicable local laws and regulations in the operation and application of this product.
- Do not expose this product to rain or wet conditions.
- Always operate this product indoors on a solid horizontal table or workbench.
- Set up the machine in a well-ventilated place when printing. The melting of some materials may release toxic fumes.
- The use of materials other than the ones that come with the machine may require additional safety measures. Make sure to check the safety data sheet (SDS) of each specific material provided by its supplier for safety information. Compliance FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. T h i s e q u i p m e n t g e n e ra t e s , u s e s a n d c a n ra d i a t e ra d i o frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. 1 Copyright 2022 Snapmaker. All rights reserved. These language versions of the guidelines are verified by the manufacturer (Original Instruction).
- Minors are only allowed to use this product under adult supervision If this equipment does cause harmful interference to radio or en ISEDC Compliance This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas license-exempt television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the RSS(s). Operation is subject to the following two conditions:
(1)This device may not cause interference. Labels on Your J1 interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or Modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
(2)This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1)Lappareil ne doit pas produire de brouillage.
(2)Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. The device is compliant with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance. The minimum distance from the body to use the device is 20cm. Le prsent appareil est conforme. Aprs examen de ce matriel aux conformit ou aux limites dintensit de champ RF, les utilisateurs peuvent sur lexposition aux radiofrquences et la conformit and compliance dacqurir les informations Specifications correspondantes. La distance minimale du corps utiliser le dispositif est de 20cm. Printing Properties Avoid placing items here. On the base panel en Be aware of potential hazards. On the PEI glass plate and heated bed Take care when handling fragile objects. On the PEI glass plate Avoid touching the object when printing. On the PEI glass plate and heated bed Do not print on this surface. On the heated bed Avoid contact with hot surfaces. On the extruders, PEI glass plate, heated bed, and top panel Take care to avoid crushing of hands. On the base panel DOC (TBD) Snapmaker EC DECLARATION OF CONFORMITY PRODUCT INFORMATION Product Snapmaker J1 3D Printer Model Function J1 3D Printer MANUFACTURER Shenzhen Snapmaker Technologies Co., Ltd. 4F & 5F, Building 13, Pingshan First Road, Nanshan District, Shenzhen, China Post Code: 518000
(86) 0755-26926117 YEAR OF AFFIXING CE MARKING: 2022 We hereby declare under our sole responsibility that the product above is in compliance with the essential requirements of the Machinery Directive (2006/42/EC), EMC Directive (2014/30/EU), Radio Equipment Directive (2014/53/EU), Low Voltage Directive 2014/35/EU, WEEE Directive 2012/19/EU, ROHS Directive (2011/65/EU), Amendment Directives (2015/863/EU) and REACH. By application of:
STANDARDS EN 55032:2015 EN 55035:2017 EN 61000-3-2:2014 EN 61000-3-3:2013 EN 55032: Electromagnetic compatibility of multimedia equipment - Emission Requirements (EMC);
EN 55035: Electromagnetic compatibility of multimedia equipment - Immunity Requirements (EMC);
EN 61000-3-2, Limits for harmonic current emissions (EMC);
EN 61000-3-3, Limits Section 3 (EMC) TITLES EN 61000-6-1:2007, EN 61000-6-3:2007 + A1:2011
+AC: 2012 EN 61000-6-3, Electromagnetic Compatibility - Part 6-3: Generic standards - Emission Standard for Residential, Commercial and Light-industrial Environments
(EMC);
EN 61000-6-1, Electromagnetic Compatibility Generic Immunity Standard, Part 1: Residential, Commercial and Light Industries (EMC) ETSI EN 301 489-1 V2.2.3 (2019-11) ETSI EN 301 489-3 V2.1.1 (2019-03) ETSI EN 301 489-17 V3.2.4 (2020-09) ETSI EN 300 328 V2.2.2 (2019-07) ETSI EN 301 893 V2.1.1 (2017-05) ETSI EN 300 440 V2.2.1 (2018-07) EN 50566:2017 EN 50663:2017 EN 62479:2010 RED Article 3.1(b), EMC (RED) RED Article 3.2, Radio (RED) RED Article 3.1(a), Health (RED) EN 62368-1:2020+A11:2020 EN IEC 62368-1 Audio/video, information and communication technology equipment, Part 1: Safety requirements (LVD-Safety) Council Directive 2006/42/EC, Annex I Council Directive 2006/42/EC, Annex I Essential health and safety requirements relating to the design and construction of machinery (MD) EN 60204-1:2018 EN 60204-1:2018, Safety of machinery - Electrical equipment of machines, Part 1: General requirements (MD) ISO 13849-1:2015 ISO 13849-1:2015, Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (MD) EN ISO 12100:2010 EN ISO 12100:2010, Safety of machinery - General principles for design - Risk assessment and risk reduction (MD) Directive 2011/65/EU RoHS Directive 2011/65/EU and amendment directives (EU) 2015/863 on Lead, Cadmium, Mercury, Hexavalent Chromium, PBBs & PBDEs, Phthalates (DBP, BBP, DEHP, DIBP) content (RoHS) Directive 2012/19/EU WEEE Directive 2012/19/EU (WEEE)
(EC) No 1907/2006 European Chemicals Agency (ECHA) regarding Regulation (EC) No 1907/2006 and its amendment directives concerning the REACH. (REACH) The technical documentation is kept at the Manufacturers address. Shenzhen Snapmaker Technologies Co., Ltd. CHEN XUEDONG / CEO Date of issue: 07/15/2022 Place of issue: SHENZHEN, CHINA 2 Technology Fused Filament Fabrication (FFF) Extruder System Independent Dual Extruders (IDEX) Printing Modes 1. Standard Mode 2. Backup Mode 3. Copy Mode 4. Mirror Mode Standard Mode & Backup Mode: 300 mm 200 mm 200 mm Build Volume (L, W, H) Copy Mode: 160 mm 200 mm 200 mm Mirror Mode: 150 mm 200 mm 200 mm Printing Speed 10 mm/s100 mm/s Build Plate PEI glass plate Layer Height (with 0.4 mm nozzle) 0.05 mm0.3 mm Max Heated Bed Temperature Nozzle Diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm (sold separately) Max Nozzle Temperature 100 300 Filament Diameter 1.75 mm Supported Materials PLA, ABS, HIPS, PC, TPU, TPE, PETG, ASA, PP, PVA, PA-GF, PA-CF, PA Connectivity Wi-Fi, USB cable, USB flash drive Operating Noise
< 50 dB(A) Machine Properties Overall Dimensions (L, W, H) 539 mm 401 mm 464 mm Net Weight 25 kg Touchscreen Memory 1 GB RAM, 8 GB eMMC Size: 5 in. System: Android Resolution: 1280 720 pixels Operating Conditions Storage Environment Operating Environment Temperature: -25C55C Relative Humidity: 10%90% (non-condensing) Temperature: 10C35C Relative Humidity: 10%90% (non-condensing) Rated Voltage: AC 100 V240 V, 50 Hz60 Hz Rated Current: 4.4 A Max. Output DC 24 V, 400 W Max. Frequency Range 2.400 GHz2.482 GHz, 5.150 GHz5.250 GHz, 5.725 GHz5.850 GHz 802.11a/b/g/n20/n40 Transmitter Power (EIRP) 5.2 GHz: < 12.50 dBm (USA & Canada) 2.4 GHz: < 1750 dBm (USA & Canada) 5.8 GHz: < 6.50 dBm (USA & Canada) Power Input Wi-Fi Protocol Software Supported OS Windows, macOS Supported File Types STL, OBJ, 3MF Output File Type G-code Slicing Software Lava Studio (or third-party slicers) 3 de de Haftungsausschluss die geltenden rtlichen Gesetze und Vorschriften.
- Setzen Sie dieses Gert nicht Regen oder nassen Bedingungen Konformitt Vergewissern Sie sich, dass jeder, der dieses Gert verwendet, den aus. Inhalt dieser Sicherheitsrichtlinien und der Schnellstartanleitung kennt und versteht. (Die Sicherheitsrichtlinien und die Schnellstartanleitung werden im Folgenden als Anleitungen
- Betreiben Sie dieses Gert immer in Innenrumen auf einem stabilen horizontalen Tisch oder einer Werkbank.
- Minderjhrige drfen dieses Gert nur unter Aufsicht und mit Hilfe bezeichnet, die unter https://support.snapmaker.com verfgbar von Erwachsenen verwenden. sind.)Nichtbeachtung der Anleitungen kann zu Verletzungen, minderwertigen Ergebnissen oder Schden am Produkt fhren.
- Stellen Sie sicher, dass Umstehende auch alle Sicherheitshinweise d i e s e s G e r t s l e s e n u n d v e r s t e h e n , u n d h a l t e n S i e a u s Sicherheitsgrnden Umstehende fern, whrend Sie dieses Gert Bei der Verwendung von Snapmaker-Produkten sollten Sie die bedienen. folgenden Anforderungen erfllen:
-Befolgen Sie bei der Montage, Handhabung, Lagerung, Verwendung, Wartung oder Entsorgung dieses Produkts die Anweisungen in Gert bedienen. den Anleitungen, die geltenden Gesetze und Vorschriften sowie die Sicherheitsvorschriften.
-Stellen Sie sicher, dass bei der Herstellung von Objekten mit diesem Produkt keine geistigen Eigentumsrechte Dritter oder geltende Gesetze oder Vorschriften verletzt werden.
- Bleiben Sie wachsam, achten Sie auf Ihre Handlungen, und benutzen Sie Ihren gesunden Menschenverstand, wenn Sie dieses
- Verwenden Sie dieses Gert nicht, wenn Sie mde sind oder unter dem Einfluss von Drogen, Alkohol oder Medikamenten stehen.
- Greifen Sie nicht in das Innere des Gertes und berhren Sie die beweglichen Teile nicht, whrend das Gert noch in Betrieb ist, da dies Verletzungen verursachen kann.
- Lassen Sie das Gert nicht unbeaufsichtigt, wenn es noch Die Bedingungen oder Methoden zur Verwendung von Snapmaker-
eingeschaltet bleibt. Produkten liegen auerhalb der Kontrolle von Snapmaker. Aus diesem Grund bernimmt Snapmaker keine Verantwortung und lehnt ausdrcklich jede Haftung fr Folgen ab, die sich aus Folgendem ergeben:
beschrnkt. In allen Vereinigtes Knigreich und EU-Mitgliedsstaaten ist der Betrieb von 5150-5250 MHz ausschlielich auf die Nutzung in Innenrumen
-Ihre unsachgemen Methoden, die Nichtbefolgung der Anweisungen der Anleitungen oder die Auswirkungen anderer unsicherer Faktoren beim Betrieb dieses Gert;
-Ihre Verletzung von geistigen Eigentumsrechten Dritter oder Verletzung geltender Gesetze oder Vorschriften bei der Herstellung von Objekten mit diesem Gert;
Personenschden, minderwertige Ergebnisse oder Schden am Gert, die sich aus oder im Zusammenhang mit der Montage, Handhabung, Lagerung, Verwendung, Wartung oder Entsorgung dieses Gerts ergeben. Gerts. Kein Teil der Anleitungen darf ohne die vorherige schriftliche Genehmigung von Snapmaker auf irgendeine Weise reproduziert, bearbeitet oder berarbeitet werden. Snapmaker behlt sich das Recht vor, die Anleitungen nach eigenem Ermessen jederzeit und Schalten Sie das Gert sofort aus und verwenden Sie dieses Produkt nicht mehr, falls eine der folgenden Flle eintritt:
- Sie bemerken an irgendeiner Stelle einen Brandgeruch.
- Sie erkennen Beschdigungen an den inneren Bauteilen dieses
- Das Gert stellt unerwartet den Betrieb ein.
- Dieses Gert erzeugt ungewhnliche Lichtsignale, Funken oder Gerusche aus, die vorher nicht auftraten.
- Sie bemerken eine Anomalie an diesem Gert. ohne Vorankndigung zu ndern oder zu berarbeiten. Sie knnen Sicherheit beim 3D Druck die aktuelle Version der Anleitungen auf unserer offiziellen Website
- Berhren Sie die Dse, die PEI-Glasplatte und das beheizte Bett herunterladen: https://support.snapmaker.com. nicht, wenn das Gert druckt oder heizt.
- Ziehen Sie immer das Netzkabel aus der Steckdose, bevor Sie Wartungsarbeiten vornehmen.
- Stellen Sie das Gert an einem gut belfteten Ort auf, wenn Sie drucken. Das Schmelzen einiger Materialien kann toxische Dmpfe freisetzen.
- Die Verwendung von anderen als den mit dem Gert gelieferten Materialien kann zustzliche Sicherheitsmanahmen erfordern. Achten Sie darauf, das Sicherheitsdatenblatt (SDB) jedes spezifischen Materials, das von seinem Lieferanten bereitgestellt wird, auf Sicherheitsinformationen zu berprfen. Bestimmungsgeme Verwendung Die 3D Drucker von Snapmaker sind fr die Verwendung gem der Anweisungen in den Anleitungen vorgesehen. Bei der Herstellung von Objekten mit den 3D Druckern von Snapmaker sind die Benutzer dafr verantwortlich, die Anwendung des erstellten Objekts fr die vorgesehene Verwendung zu qualifizieren und zu validieren, insbesondere bzgl. Anwendungen in streng regulierten Bereichen wie klinischen Gerten und der Luftfahrt. Sicherheitshinweise Allgemeine Sicherheitsinformationen
- Befolgen Sie beim Betrieb und bei der Anwendung dieses Gerts 4 Snapmaker EG-KONFORMITTSERKLRUNG PRODUKTINFORMATIONEN Produkt Modell Funktion Snapmaker J1 3D Drucker J1 3D Druck HERSTELLER Shenzhen Snapmaker Technologies Co., Ltd. 4F & 5F, Building 13, Pingshan First Road, Nanshan District, Shenzhen, China Postleitzahl: 518000
(86) 0755-26926117 JAHR DER CE-KENNZEICHNUNG: 2022 Wir erklren hiermit unter unserer alleinigen Verantwortung, dass das obige Produkt mit den wesentlichen Anforderungen der Maschinenrichtlinie (2006/42/EG), EMV-Richtlinie (2014/30/
EU), Funkanlagenrichtlinie (2014/53/EU), Niederspannungsrichtlinie 2014/35/EU, WEEE-
Richtlinie 2012/19/EU, ROHS-Richtlinie (2011/65/EU), nderungsrichtlinien (2015/863/EU) und REACH konform ist. Durch Anwendung von:
NORMEN EN 55032:2015 EN 55035:2017 EN 61000-3-2:2014 EN 61000-3-3:2013 TITEL EN 55032: Elektromagnetische Vertrglichkeit von Multimediagerten - Emissionsanforderungen (EMV);
EN 55035: Elektromagnetische Vertrglichkeit von Multimediagerten - Anforderungen zur Strfestigkeit (EMV);
EN 61000-3-2, Grenzwerte fr Oberschwingungsstrme (EMV);
EN 61000-3-3, Grenzwerte Abschnitt 3 (EMV) EN 61000-6-1:2007, EN 61000-6-3:2007 + A1:2011
+AC: 2012 EN 61000-6-3, Elektromagnetische Vertrglichkeit - Teil 6-3: Fachgrundnormen - Emissionsnorm fr Wohnbereiche-, Geschfts- und Gewerbebereiche sowie Kleinbetriebe (EMV);
EN 61000-6-1, Allgemeine Strfestigkeitsnorm zur elektromagnetischen Vertrglichkeit, Teil 1: Wohn-, Gewerbe- und Kleinbetriebe (EMV) ETSI EN 301 489-1 V2.2.3 (2019-11) ETSI EN 301 489-3 V2.1.1 (2019-03) ETSI EN 301 489-17 V3.2.4 (2020-09) ETSI EN 300 328 V2.2.2 (2019-07) ETSI EN 301 893 V2.1.1 (2017-05) ETSI EN 300 440 V2.2.1 (2018-07) RED Artikel 3.1(b), EMV (RED) RED Artikel 3.2, Funk (RED) EN 50566:2017 EN 50663:2017 EN 62479:2010 RED Artikel 3.1(a), Gesundheit (RED) EN 62368-1:2020+A11:2020 EN IEC 62368-1 Gerte der Audio-/Video-, Informations- und Kommunikationstechnik, Teil 1: - Sicherheitsanforderungen (LVD-Sicherheit) Richtlinie 2006/42/EG des Rates, Anhang I Richtlinie 2006/42/EG des Rates, Anhang I Grundlegende Gesundheits- und Sicherheitsanforderungen bzgl. des Entwurfs und Baus von Maschinen (MD) EN 60204-1:2018 EN 60204-1:2018, Sicherheit von Maschinen - Elektrische Ausrstung von Maschinen, Teil 1: Allgemeine Anforderungen (MD) ISO 13849-1:2015 ISO 13849-1:2015, Sicherheit von Maschinen - Sicherheitsbezogene Teile von Steuerungen - Teil 1: Allgemeine Gestaltungsleitstze (MD) EN ISO 12100:2010 EN ISO 12100:2010, Sicherheit von Maschinen - Allgemeine Gestaltungsleitstze - Risikobeurteilung und Risikominderung (MD) Richtlinie 2011/65/EU RoHS-Richtlinie 2011/65/EU und nderungsrichtlinien (EU) 2015/863 bzgl. des Gehalts an Blei, Kadmium, Quecksilber, sechswertigem Chrom, PBBs & PBDEs, Phthalate (DBP, BBP, DEHP, DIBP) (RoHS) Richtlinie 2012/19/EU WEEE Richtlinie 2012/19/EU (WEEE)
(EG) Nr. 1907/2006 Europische Chemikalienagentur (ECHA) zur Verordnung (EG) Nr. 1907/2006 und ihren nderungsrichtlinien zu REACH. (REACH) Die technische Dokumentation wird beim Hersteller aufbewahrt. Shenzhen Snapmaker Technologies Co., Ltd. CHEN XUEDONG / CEO Ausstellungsdatum: 15.07.2022 Ausstellungsort: SHENZHEN, CHINA 5 de Etiketten auf Ihrem J1 Seien Sie sich der mglichen Gefahren bewusst. Auf der PEI-Glasplatte und dem beheizten Bett Vermeiden Sie Berhrungen. Auf der PEI-Glasplatte und dem beheizten Bett Vorsicht beim Umgang mit zerbrechlichen Gegenstnden. Auf der PEI-Glasplatte Drucken Sie nicht auf dieser Oberflche. Auf dem beheizten Bett Vermeiden Sie den Kontakt mit heien Oberflchen. Auf den Extrudern, der PEI-Glasplatte, dem beheizten Bett und der oberen Platte Vermeiden Sie es, Gegenstnde hier zu platzieren. Auf der Grundplatte Achten Sie darauf, dass Sie sich nicht die Hnde quetschen. Auf der Grundplatte Spezifikationen Druckeigenschaften Technologie Druckmodi Schmelzschichtung (FFF) Extruder-System Unabhngige duale Extruder (IDEX) 1.Standard-Modus 2.Backup-Modus 3.Kopier-Modus 4. Spiegel-Modus Bauvolumen (B, T, H) Standard-Modus und Backup-Modus300 mm 200 mm 200 mm Kopier-Modus: 160 mm 200 mm 200 mm Spiegel-Modus: 150 mm 200 mm 200 mm Druckgeschwindigkeit 10 mm/s100 mm/s Bauplatte PEI glass plate Schichthhe (mit 0,4 mm-Dse) 0.05 mm0.3 mm Maximale Temperatur des beheizten Betts 100 Durchmesser der Dse 0,4 mm (im Lieferumfang enthalten) 0,2 mm, 0,6 mm, 0,8 mm (separat erhltlich) Maximale Dsentemperatur 300 Filamentdurchmesser 1.75 mm Untersttzte Materialien PLA, ABS, HIPS, PC, TPU, TPE, PETG, ASA, PP, PVA, PA-GF, PA-CF, PA Konnektivitt Wi-Fi, USB-Kabel, USB-Stick Betriebsgerusch
< 50 dB(A) Eigenschaften des Gerts Gesamtabmessungen (B, T, H) 539 mm 401 mm 464 mm Nettogewicht 25 kg Gre: 5 Zoll System: Android Auflsung: 1280 720 Pixel Betriebsbedingungen Betriebsumgebung Lagerungsumgebung Temperatur: 10 C35C Relative Luftfeuchtigkeit: 10%90% (nicht kondensierend) Temperatur: -25C55C Relative Luftfeuchtigkeit: 10 %90 % (nicht kondensierend) Nennspannung: Wechselstrom 100240 V, 5060 Hz Nennstrom: 4,4 A Max. Ausgang DC 24 V, 400 W max. 802.11a/b/g/n20/n40 Frequenzbereich 2.400 GHz2.482 GHz, 5.150 GHz5.250 GHz, 5.725 GHz5.850 GHz 2,4 GHz: < 17.50 dBm (USA & Kanada) Sendeleistung (EIRP) 5,2 GHz: < 12.50 dBm (USA & Kanada) 5,8 GHz: < 6.50 dBm (USA & Kanada) Slicing-Software Lava Studio (oder Slicer von Drittanbietern) Untersttztes Betriebssystem Windows, macOS Untersttzte Dateitypen STL, OBJ, 3MF Ausgabedateityp G-code Strom Eingang Wi-Fi Protokoll Software 6 Clause de non-responsabilit
- Ne pas exposer le produit la pluie ou aux conditions humides.
- Toujours utiliser ce produit en intrieur, sur une table ou un tabli Veillez toujours ce que toute personne qui utilise ce produit solide et horizontal. connaisse et comprenne le contenu de ces Consignes de scurit et du Guide de dmarrage rapide. (Les Consignes de scurit et le Guide de dmarrage rapide seront ci-aprs dnomms les Guides et sont disponibles ladresse suivante : https://
support.snapmaker.com.) Le non-respect des instructions de ces Guides peut entraner des blessures corporelles, des rsultats ce produit.
- Les mineurs ne sont autoriss utiliser ce produit que sous la surveillance et lassistance dun adulte.
- Sassurer que les personnes qui vous assistent lisent et comprennent galement toutes les consignes de scurit. Pour des raisons de scurit, veuillez les tenir lcart lors de lutilisation de insatisfaisants ou des dommages au produit Snapmaker.
- Rester vigilant, regarder le travail en cours et faire preuve de bon sens lors de lutilisation de ce produit. Pendant lutilisation des produits Snapmaker, vous devez vous
- Ne pas utiliser ce produit tant fatigu ou sous linfluence de conformer aux exigences suivantes:
-Suivre les instructions des guides, respecter les lois et rglements en vigueur, ainsi que les rgles de scurit lors de lassemblage, de la manipulation, du stockage, de lutilisation, de la maintenance ou drogues, dalcool ou de mdicaments.
- Ne pas toucher la partie intrieure de la machine ni les pices mobiles lorsque la machine est encore en fonctionnement, car elle pourrait causer des blessures.
- Ne pas laisser la machine sans surveillance lorsquelle est encore de la mise au rebut de ce produit.
-Sassurer que la fabrication dobjets laide de ce produit ne sous tension. constitue pas une violation des droits de proprit intellectuelle dun tiers ou une violation des lois ou rglements en vigueur. Dans tous les tats membres du Royaume-Uni et de l'UE, l utilisation de la bande 5150-5250 MHz est limite exclusivement un usage en intrieur. Les conditions ou mthodes dutilisation des produits Snapmaker sont hors du contrle de Snapmaker. Pour cette raison, Snapmaker nassume aucune responsabilit et dcline expressment toute responsabilit pour les consquences rsultant :
-des mthodes inappropries, du non-respect des instructions des Guides ou des impacts dautres facteurs incertains lors de lutilisation de ce produit ;
-de la violation par lutilisateur des droits de proprit intellectuelle dun tiers ou de la violation de toute loi ou rglement en vigueur lors de la fabrication dobjets laide de ce produit ;
cette machine. teignez immdiatement la machine et arrtez de lutiliser dans les cas suivants :
- Vous sentez une odeur de brl un moment quelconque.
- Vous constatez un endommagement de composants intrieurs de
-des blessures corporelles, des rsultats insatisfaisants ou des dommages au produit rsultant de lassemblage, de la manipulation, du stockage, de lutilisation, de la maintenance ou de la mise au rebut de ce produit.
- La machine arrte subitement de fonctionner.
- La machine met des lumires, des tincelles ou des sons inhabituels, alors quils ne se produisaient pas auparavant.
- La machine prsente une anomalie quelconque.
- Ne pas toucher la buse, le plateau en verre PEI et le lit chauffant lorsque la machine est en cours dimpression ou en chauffage.
- Toujours dbrancher le cble dalimentation de la prise lectrique avant de procder la maintenance.
- Lors de limpression, installer la machine dans un endroit bien ventil. La fusion de certains matriaux peut dgager des fumes toxiques.
- Lutilisation de matriaux autres que ceux fournis avec la machine peut ncessiter des mesures de scurit supplmentaires. Veillez consulter la fiche des donnes de scurit (FDS) fournie par son fournisseur pour chaque matriau spcifique afin dobtenir des informations sur la scurit. rvise, par quelque moyen que ce soit, sans lautorisation crite pralable de Snapmaker. Snapmaker se rserve le droit de modifier ou rviser les Guides, sa seule discrtion, tout moment et sans pravis. Vous pouvez tlcharger la version actualise des Guides sur notre site officiel: https://support. snapmaker.com. Utilisation prvue Les imprimantes 3D Snapmaker sont conues pour tre utilises conformment aux instructions fournies dans les Guides. Les utilisateurs qui fabriquent des objets laide des imprimantes 3D Snapmaker demeurent responsables de la qualification et de la validation de lapplication de lobjet cr pour lutilisation prvue, en particulier pour les applications dans des domaines strictement rglements comme les dispositifs mdicaux et laronautique. Consignes de scurit Informations gnrales en matire de scurit
- Se conformer aux lois et rglements locaux en vigueur pour lutilisation et lapplication de ce produit. fr 7 Touchscreen Speicher 1 GB RAM, 8 GB eMMC Aucune partie des Guides ne peut tre reproduite, modifie ou Scurit de limpression 3D ANNE D'APPOSITION DU MARQUAGE CE : 2022 Nous dclarons par la prsente, sous notre seule responsabilit, que le produit ci-dessus est conforme aux exigences essentielles de la Directive relative aux machines (2006/42/CE), de la Directive CEM (2014/30/UE), de la Directive relative aux quipements radio (2014/53/
UE), de la Directive relative aux basses tensions 2014/35/UE, de la Directive DEEE 2012/19/UE, de la Directive ROHS (2011/65/UE), des directives modificatives (2015/863/UE) et de REACH. En application de:
Modes dimpression 1.1.Mode standard 2.Mode sauvegarde 3.Mode copie 4. Mode miroir Volume de construction
(Longueur, Largeur, Mode standard et mode sauvegarde300 mm 200 mm 200 mm Mode copie: 160 mm 200 mm 200 mm Hauteur) Mode miroir 150 mm 200 mm 200 mm Technologie Dpt de fil fondu (DFF) Systme dextrudeuse IDEX (Systme deux extrudeuses indpendantes) fr Conformit Snapmaker DCLARATION DE CONFORMIT CE INFORMATIONS RELATIVES AU PRODUIT Imprimante 3D Snapmaker J1 Produit Modle Fonction J1 Imprimante 3D FABRICANT Shenzhen Snapmaker Technologies Co., Ltd. 4F & 5F, Building 13, Pingshan First Road, Nanshan District, Shenzhen, China Code postal: 518000
(86) 0755-26926117 fr tiquettes figurant sur votre J1 Attention aux dangers potentiels. Sur le plateau en verre PEI et le lit chauffant viter de toucher. Sur le plateau en verre PEI et le lit chauffant Faire attention lors de la manipulation dobjets fragiles. Sur le plateau en verre PEI Ne pas imprimer sur cette surface. Sur le lit chauffant viter de placer des objets ici. Sur le panneau de base viter tout contact avec les surfaces chaudes. Sur les extrudeuses, le plateau en verre PEI, le lit chauffant et le panneau suprieur Attention ne pas se faire craser les mains. Sur le panneau de base Spcifications Proprits dimpression Vitesse dimpression 10 mm/s100 mm/s Hauteur de la couche (avec une buse de 0,4 mm) 0.05 mm0.3 mm Plateau de construction PEI glass plate Temprature maximale du lit chauffant Diamtre de la buse 0,4 mm (im Lieferumfang enthalten) 0,2 mm, 0,6 mm, 0,8 mm (separat erhltlich) Temprature maximale de la buse 300 100 Diamtre du filament 1.75 mm Bruit de fonctionnement
< 50 dB(A) Connectivit Wi-Fi, USB-Kabel, USB-Stick Matriaux pris en charge PLA, ABS, HIPS, PC, TPU, TPE, PETG, ASA, PP, PVA, PA-GF, PA-CF, PA Dimensions totales (Longueur, Largeur, Hauteur) 539 mm 401 mm 464 mm Poids net 25 kg cran tactile Mmoire 1 Go RAM, 8 Go eMMC Taille: 5 pouces Systme: Android Rsolution: 1280 720 pixels Conditions de fonctionnement Environnement de fonctionnement Temprature: 10 C35 C Humidit relative: 10 %90 % (sans condensation) Temprature: -25 C55 C Humidit relative: 10 %90 % (sans condensation) Tension nominale: 100 V240 V CA, 50 Hz60 Hz Courant nominal: 4,4 A max. Sortie 24 V CC, 400 W max. Protocole 802.11a/b/g/n20/n40 Plage de frquences 2.400 GHz2.482 GHz, 5.150 GHz5.250 GHz, 5.725 GHz5.850 GHz Puissance de 2,4 GHz: < 17.50 dBm (tats-Unis & Canada) transmission (EIRP) 5,2 GHz: < 12.50 dBm (tats-Unis & Canada) 5,8 GHz: < 6.50 dBm (tats-Unis & Canada) Logiciel de dcoupage en tranches Lava Studio (ou des logiciels tiers de dcoupage en tranches) Types de fichiers de sortie Code G Types de fichiers pris en charge STL, OBJ, 3MF Systmes dexploitation pris en charge Windows, macOS 9 Puissance Entre Wi-Fi Logiciel NORMES EN 55032:2015 EN 55035:2017 EN 61000-3-2:2014 EN 61000-3-3:2013 EN 55032: Compatibilit lectromagntique des quipements multimdias - Exigences d'mission (CEM);
EN 55035: Compatibilit lectromagntique des quipements multimdias - Exigences d'immunit (CEM);
EN 61000-3-2, Limites pour les missions de courant harmonique (CEM);
EN 61000-3-3, Limites Section 3 (CEM) TITRES EN 61000-6-1:2007, EN 61000-6-3:2007 + A1:2011
+AC: 2012 EN 61000-6-3, Compatibilit lectromagntique - Partie 6-3: Normes gnriques - Norme sur les missions dans les environnements rsidentiels, commerciaux et de lindustrie lgre (CEM);
EN 61000-6-1, Norme gnrique dimmunit la compatibilit lectromagntique, Partie 1: Immunit pour les environnements rsidentiels, commerciaux et de lindustrie lgre (CEM) Proprits de la machine ETSI EN 301 489-1 V2.2.3 (2019-11) ETSI EN 301 489-3 V2.1.1 (2019-03) ETSI EN 301 489-17 V3.2.4 (2020-09) ETSI EN 300 328 V2.2.2 (2019-07) ETSI EN 301 893 V2.1.1 (2017-05) ETSI EN 300 440 V2.2.1 (2018-07) RED Article 3.1(b), CEM (RED) RED Article 3.2, Radio (RED) EN 50566:2017 EN 50663:2017 EN 62479:2010 RED Article 3.1(a), Sant (RED) Shenzhen Snapmaker Technologies Co., Ltd. CHEN XUEDONG / CEO Date de dlivrance : 15.07.2022 Lieu de dlivrance :SHENZHEN, CHINA 8 EN 62368-1:2020+A11:2020 EN IEC 62368-1 quipements audio/vido, des technologies de linformation et de la communication, Partie 1: Exigences de scurit (LVD-Scurit) Directive 2006/42/CE du Conseil, Annexe I Directive 2006/42/CE du Conseil, Annexe I Exigences essentielles de sant et de scurit relatives la conception et la construction des machines (MD) Environnement de stockage EN 60204-1:2018 EN 60204-1:2018, Scurit des machines - quipement lectrique des machines, Partie 1: Exigences gnrales (MD) ISO 13849-1:2015 ISO 13849-1:2015, Scurit des machines - Parties des systmes de commande relatives la scurit - Partie 1: Principes gnraux de conception (MD) EN ISO 12100:2010 EN ISO 12100:2010, Scurit des machines - Principes gnraux de conception - Apprciation du risque et rduction du risque (MD) Directive 2011/65/UE Directive RoHS 2011/65/UE et des directives modificatives (UE) 2015/863 sur le plomb, le cadmium, le mercure, le chrome hexavalent, les PBB et PBDE, les phtalates (DBP, BBP, DEHP, DIBP) (RoHS) Directive 2012/19/UE Directive DEEE 2012/19/UE (DEEE)
(CE) No 1907/2006 Agence europenne des produits chimiques (ECHA) concernant le rglement (CE) n 1907/2006 et ses directives modificatives concernant le rglement REACH.
(REACH) La documentation technique est conserve l'adresse du fabricant. es es Clusula de exencin de responsabilidad Cumplimiento Asegrese siempre de que cualquier persona que hace uso de
- Utilizar esta mquina siempre en interiores y sobre una mesa este producto conoce y entiende el contenido de las Directrices de horizontal firme o un banco de trabajo. seguridad y de la Gua de inicio rpido. (En adelante, las Directrices
- Los menores de edad nicamente pueden utilizar este producto de seguridad y la Gua de inicio rpido se denominarn Guas, bajo la supervisin y asistencia de un adulto. disponibles en https://support.snapmaker.com.) El incumplimiento
- Asegurarse de que las personas prximas tambin han ledo de las Directrices puede causar daos personales, resultados y entienden todas las notas de seguridad de este producto y se inferiores o daos en el producto. mantienen lejos durante el funcionamiento del mismo por motivos de seguridad. Siempre que utilice un producto Snapmaker, se ruega seguir las
- Mantenerse alerta, observar qu se est haciendo y aplicar el siguientes instrucciones:
sentido comn cuando se haga uso de este producto.
-Siga las instrucciones de las Directrices, cumpla la ley la
- No hacer uso de este producto si se nota cansancio o se est bajo regulacin aplicable, as como las normas de seguridad durante la influencia de las drogas, el alcohol o la medicacin. las operaciones de montaje, manipulacin, almacenaje, uso,
- No acceder al interior de la mquina ni tocar las piezas en mantenimiento y eliminacin del producto. movimiento si la mquina sigue funcionando, ya que puede causar
-Asegrese de que no se incumple ningn derecho de propiedad lesiones. intelectual de terceras partes ni se infringe ninguna ley o regulacin
- No dejar la mquina sin atencin mientras est encendida. En todos los estados miembros del Reino Unido y la UE, el funcionamiento de 5150-5250 MHz est restringido a un uso exclusivo en interiores. aplicable cuando realice objetos con este producto. Las condiciones y los mtodos de uso de los productos Snapmaker estn fuera del control de Snapmaker. Por ello, Snapmaker no asume ningn tipo de responsabilidad y renuncia expresamente a cualquier consecuencia derivada de lo siguiente:
-los mtodos incorrectos del usuario, as como no seguir las instrucciones incluidas en las Guas o cualquier impacto de factores inciertos cuando se haga uso del producto;
-infringir derechos de propiedad intelectual de terceras partes o En caso de producirse uno de los siguientes casos, apagar la incumplir cualquier ley o regulacin aplicable por parte del usuario mquina inmediatamente y dejar de usarla:
cuando realice objetos con este producto;
- Huele a quemado en cualquier sitio.
-daos personales, resultados inferiores o daos en el producto
- Se observa algn dao en los componentes internos de la derivados o relacionados con el montaje, manipulacin, mquina. almacenaje, uso, mantenimiento o eliminacin del producto.
- La mquina deja de funcionar sin motivo. Ninguna parte de las Guas debe reproducirse, editarse o revisarse
- La mquina emite luces, chispas o sonidos que nunca antes se haban observado. por cualquier medio sin la previa autorizacin escrita de Snapmaker.
- La mquina muestra cualquier tipo de anormalidad. Snapmaker se reserva el derecho de modificar o revisar las Guas bajo su propio criterio en cualquier momento y sin previo aviso. Puede descargar la ltima versin de las Guas en nuestra pgina Seguridad en impresin 3D
- No tocar la boquilla, la placa de vidrio PEI ni la cama caliente web: https://support.snapmaker.com. cuando la mquina est imprimiendo o se est calentando. Snapmaker DCLARATION DE CONFORMIT CE INFORMACIN SOBRE EL PRODUCTO Producto Modelo Funcin Impresora 3D Snapmaker J1 J1 Impresora 3D FABRICANTE Shenzhen Snapmaker Technologies Co., Ltd. 4F & 5F, Building 13, Pingshan First Road, Nanshan District, Shenzhen, China Cdigo postal: 518000
(86) 0755-26926117 AO DE CERTIFICACIN DE MARCA CE: 2022 Por la presente declaramos bajo nuestra propia responsabilidad que el producto anterior cumple las condiciones bsicas de la Directiva sobre Maquinaria (2006/42/EC), Directiva EMC (2014/30/EU), Directiva de Equipos de Radio (2014/53/EU), Directiva de bajo Voltaje 2014/35/EU, Directiva WEEE 2012/19/EU, Directiva RoHS (2011/65/EU), Directivas de correccin (2015/863/EU) y REACH. Mediante la aplicacin de:
ESTNDARES TTULOS EN 55032:2015 EN 55035:2017 EN 61000-3-2:2014 EN 61000-3-3:2013 EN 55032: Compatibilidad electromagntica de equipo multimedia - Emisin. EN 55035: Compatibilidad electromagntica de equipo multimedia - Inmunidad. EN 61000-3-2, Lmites de emisiones de corriente armnica. EN 61000-3-3, Seccin 3 de Lmites (EMC) ETSI EN 301 489-1 V2.2.3 (2019-11) ETSI EN 301 489-3 V2.1.1 (2019-03) ETSI EN 301 489-17 V3.2.4 (2020-09) RED Artculo 3.1(b), EMC (RED) ETSI EN 300 328 V2.2.2 (2019-07) ETSI EN 301 893 V2.1.1 (2017-05) ETSI EN 300 440 V2.2.1 (2018-07) RED Artculo 3.2, Radio (RED) EN 50566:2017 EN 50663:2017 EN 62479:2010 RED Artculo 3.1(a), Salud (RED) EN 61000-6-1:2007, EN 61000-6-3:2007 + A1:2011
+AC: 2012 EN 61000-6-3, Compatibilidad electromagntica (EMC) - Parte 6-3: Estndares genricos - Estndar de emisin para entornos residenciales, comerciales e industriales ligeros. EN 61000-6-1, Estndar de inmunidad genrica de Compatibilidad electromagntica, Parte 1: Industria residencial, comercial y ligera (EMC) Uso final Las impresoras 3D de Snapmaker se han diseado para un uso conforme a las directrices especificadas en las Guas. Cuando se realicen objetos con las impresoras 3D de Snapmaker, los usuarios son responsables de calificar y validar la aplicacin del objeto creado para su uso final, especialmente en caso de aplicaciones en mbitos estrictamente regulados como dispositivos mdicos o txicos. aeronutica. informacin de seguridad.
- Antes de realizar cualquier operacin de mantenimiento, desenchufar siempre el cable de alimentacin.
- Cuando se imprima, colocar siempre la impresora en una zona bien ventilada. La mezcla de ciertos materiales puede emitir humos
- El uso de materiales diferentes a los materiales incluidos con la mquina exigen otras medidas de seguridad. Revisar la hoja de EN 62368-1:2020+A11:2020 EN IEC 62368-1 Audio/vdeo, equipo de tecnologa de la informacin y comunicacin, Parte 1-Condiciones de seguridad (LVD-Seguridad) Directiva del Consejo 2006/42/EC, Anexo I Directiva del Consejo 2006/42/EC, Anexo I Condiciones esenciales de seguridad y salud referentes al diseo y la fabricacin de maquinaria (MD) EN 60204-1:2018 EN 60204-1:2018, Seguridad en maquinaria - Equipo elctrico de mquinas, Parte 1: Condiciones generales (MD) ISO 13849-1:2015 ISO 13849-1:2015, Seguridad en maquinaria - Partes relacionadas con seguridad de sistemas de control - Parte 1: Principios generales del diseo (MD) EN ISO 12100:2010 EN ISO 12100:2010, Seguridad en maquinaria - Principios generales en diseo - Valoracin del riesgo y reduccin del riesgo (MD) datos de seguridad (SDS) de cualquier material para conocer toda la Directiva 2011/65/EU Directiva RoHS (Restriccin de ciertas sustancias peligrosas) y directivas de enmienda (EU) 2015/863 sobre contenido en Plomo, Cadmio, Mercurio, Cromo hexavalente, Bifenilos polibromados (PBB) y teres de bifenilos polibromados (PBDE) y Ftalatos (DBP, BBP, DEHP, DIBP). Directiva 2012/19/EU Directiva WEEE 2012/19/EU (WEEE)
(EC) No 1907/2006 Agencia Qumica Europea (ECHA) sobre Regulacin (EC) No 1907/2006 y sus directivas de correccin respecto a REACH. (REACH) La documentacin tcnica se conserva en la direccin del fabricante. Notas de seguridad Informacin de seguridad general
- Durante el funcionamiento y la aplicacin de este producto se deben cumplir las leyes y las regulaciones locales aplicables.
- No exponer la mquina a la lluvia o a condiciones de humedad. 10 Shenzhen Snapmaker Technologies Co., Ltd. CHEN XUEDONG / CEO Fecha de emisin: 15.07.2022 Lugar de emisin: SHENZHEN, CHINA 11 es Etiquetas de la J1 Atencin a los posibles riesgos. En la placa de vidrio PEI y la cama caliente Evitar tocar el aparato. En la placa de vidrio PEI y la cama caliente Actuar con cuidado cuando se manipulen objetos frgiles. En la placa de vidrio PEI No imprimir sobre esta superficie. En la cama caliente. Evitar el contacto con superficies calientes. En los extrusores, la placa de vidrio PEI, la cama caliente y el panel superior. Evitar colocar artculos aqu. En el panel de base Actuar con cuidado para evitar el aplastamiento de las manos. En el panel de base Especificaciones Propiedades de impresin Tecnologa Fabricacin de Filamento Fundido (FFF) Sistema extrusor Extrusores duales independientes (IDEX) Modos de impresin 1.Modo estndar 2.Modo copia de seguridad 3.Modo copia 4.Modo espejo Volumen de Modo estndar y Modo copia de seguridad: 300 mm 200 mm 200 mm construccin (Ancho, Modo copia: 160 mm 200 mm 200 mm Profundidad, Alto) Modo espejo: 150 mm 200 mm 200 mm Velocidad de impresin 10 mm/s100 mm/s Altura de capa (con boquilla de 0,4 mm) 0.05 mm0.3 mm Base de impresin Placa de vidrio PEI Temprature maximale du lit chauffant 100 Dimetro de la boquilla 0,4 mm (im Lieferumfang enthalten) 0,2 mm, 0,6 mm, 0,8 mm (separat erhltlich) Temperatura mxima de la boquilla 300 Dimetro del filamento 1.75 mm Materiales compatibles PLA, ABS, HIPS, PC, TPU, TPE, PETG, ASA, PP, PVA, PA-GF, PA-CF, PA Ruido durante el funcionamiento
< 50 dB(A) Conectividad Wi-Fi, cable USB, unidad flash USB Propiedades de la mquina Dimensiones totales (Ancho, Profundidad, Alto) 539 mm 401 mm 464 mm Peso neto 25 kg Pantalla tctil Memoria 1 GB RAM, 8 GB eMMC Medida: 5 pulgadas Sistema: Android Resolucin: 1280 720 pxeles Condiciones de funcionamiento Entorno operativo Environnement de stockage Temperatura: 10 C-35 C Humedad relativa: 10 %-90 % (sin condensacin) Temperatura: -25 C-55 C Humedad relativa: 10 %-90 % (sin condensacin) Tensin nominal: AC 100 V-240 V, 50 Hz-60 Hz Corriente nominal: 4,4 A mx. Salida DC 24 V, 400 W mx. Rango de frecuencia 2.400 GHz2.482 GHz, 5.150 GHz5.250 GHz, 5.725 GHz5.850 GHz Fabricacin de Filamento Fundido (FFF) 2,4 GHz: < 17.50 dBm (EE. UU. & Canad) 5,2 GHz: < 12.50 dBm (EE. UU. & Canad) 5,8 GHz: < 6.50 dBm (EE. UU. & Canad) Potencia Entrada Wi-Fi Protocolo Voltaje de transmisin
(EIRP) Programa 12 Esclusione di responsabilit Assicurarsi che chiunque utilizzi questo prodotto conosca e comprenda il contenuto delle presenti Linee guida sulla sicurezza e della Guida rapida. (Le Linee guida sulla sicurezza e la Guida rapida saranno di seguito denominate Guide, disponibili all'indirizzo https://support.snapmaker.com.)La mancata osservanza delle Guide pu causare lesioni personali, risultati inferiori o danni al prodotto. seguenti requisiti:
Quando si utilizzano i prodotti Snapmaker, necessario attenersi ai
-Seguire le istruzioni delle Guide, le leggi e i regolamenti applicabili e le norme di sicurezza per l'assemblaggio, la gestione, la conservazione, l'uso, la manutenzione o lo smaltimento di questo prodotto.
-Assicurarsi che non vi siano violazioni dei diritti di propriet intellettuale di terzi o di leggi o regolamenti applicabili quando si realizzano oggetti con questo prodotto. Le condizioni o i metodi di utilizzo dei prodotti Snapmaker sono al di fuori del controllo di Snapmaker. Per questa ragione, Snapmaker non si assume la responsabilit e declina espressamente ogni responsabilit per qualsiasi conseguenza derivante da:
-metodi impropri, mancata osservanza delle istruzioni delle Guide o ripercussioni di altri fattori incerti durante l'utilizzo del prodotto;
-violazioni dei diritti di propriet intellettuale di terzi o di leggi o regolamenti applicabili quando si realizzano oggetti con questo precedenza. prodotto;
-lesioni personali, risultati inferiori o danni al prodotto derivanti da o in connessione con l'assemblaggio, la gestione, la conservazione, l'uso, la manutenzione o lo smaltimento del prodotto. it
- I minori possono utilizzare questo prodotto solo sotto la supervisione e l'assistenza di un adulto.
- Assicurarsi che anche gli astanti leggano e comprendano tutte le note sulla sicurezza relative al prodotto e tenerli lontani durante il funzionamento per ragioni di sicurezza.
- Prestare attenzione, guardare le operazioni in corso e usare buon senso nellutilizzo del prodotto. droghe, alcool o farmaci.
- Non utilizzare il prodotto quando si stanchi o sotto l'effetto di
- Non toccare l'interno della macchina o le parti in movimento quando la macchina ancora in funzione, poich potrebbe causare lesioni.
- Non lasciare la macchina incustodita quando ancora in funzione. In tutti gli Stati membri del Regno Unito e dell'UE, il funzionamento a 5150-5250 MHz limitato solo per uso interno. Spegnere immediatamente la macchina e interrompere il suo utilizzo se si verifica uno dei seguenti casi:
- Odore di bruciato in qualsiasi punto della macchina.
- Danni presenti sui componenti interni della macchina.
- La macchina smette di funzionare inaspettatamente.
- Presenza di luci, scintille o rumori insoliti che non si verificavano in
- Anomalie allinterno della macchina. Sicurezza di stampa 3D
- Non toccare lugello, la lastra di vetro PEI e il letto riscaldato quando la macchina in fase di stampa o di riscaldamento.
- Scollegare sempre il cavo di alimentazione dalla presa elettrica prima di eseguire la manutenzione.
- Impostare la stampante in un luogo ben ventilato quando si stampa. La fusione di alcuni materiali pu rilasciare fumi tossici.
- L'uso di materiali diversi da quelli forniti con la macchina pu richiedere ulteriori misure di sicurezza. Per informazioni sulla sicurezza, consultare la scheda di sicurezza (SDS) di ciascun materiale specifico rilasciata dal fornitore. Nessuna parte delle Guide pu essere riprodotta, modificata o revisionata con qualsiasi mezzo senza il previo consenso scritto di Snapmaker. Snapmaker si riserva il diritto di modificare o rivedere le Guide a propria discrezione e in qualsiasi momento senza preavviso. possibile scaricare la versione aggiornata delle Guide sul nostro sito web ufficiale: https://support. snapmaker.com. Uso previsto Le stampanti 3D Snapmaker sono destinate a essere utilizzate secondo le linee guida fornite nelle Guide. Quando si realizzano oggetti con le stampanti 3D Snapmaker, gli utenti sono responsabili di verificare e convalidare l'applicazione dell'oggetto creato per l'uso previsto, in particolare in settori strettamente regolamentati come i dispositivi medici e l'aeronautica. Note sulla sicurezza Informazioni generali di sicurezza
- Per il funzionamento e l'applicazione di questo prodotto, attenersi alle leggi e ai regolamenti locali applicabili.
- Non esporre il prodotto alla pioggia o a condizioni di umidit.
- Utilizzare sempre il prodotto al chiuso su un tavolo orizzontale o su Programa de segmentacin Lava Studio (o segmentadores de terceras partes) OS compatible Windows, macOS Tipos de archivos compatibles STL, OBJ, 3MF Tipo de archivo de salida Code G un piano di lavoro solido. 13 it Conformit Snapmaker DICHIARAZIONE DI CONFORMIT CE INFORMAZIONI SUL PRODOTTO Prodotto Modello Funzione Stampante 3D Snapmaker J1 J1 Stampante 3D PRODUTTORE Shenzhen Snapmaker Technologies Co., Ltd. 4F & 5F, Building 13, Pingshan First Road, Nanshan District, Shenzhen, Cina Codice postale: 518000
(86) 0755-26926117 ANNO DI APPOSIZIONE DEL MARCHIO CE: 2022 Con la presente dichiariamo sotto la nostra esclusiva responsabilit che il prodotto di cui sopra conforme ai requisiti essenziali della Direttiva macchine (2006/42/CE), Direttiva EMC (2014/30/UE), Direttiva apparecchiature radio (2014/53/UE), Direttiva bassa tensione 2014/35/UE, Direttiva RAEE 2012/19/UE, Direttiva ROHS (2011/65/
UE), Direttiva delegata (2015/863/UE) e del REACH. In applicazione di:
STANDARD EN 55032:2015 EN 55035:2017 EN 61000-3-2:2014 EN 61000-3-3:2013 TITOLI EN 55032: Compatibilit elettromagnetica delle apparecchiature multimediali - Emissione;
EN 55035: Compatibilit elettromagnetica delle apparecchiature multimediali - Immunit;
EN 61000-3-2, Limiti per le emissioni di corrente armonica;
EN 61000-3-3, Limiti Sezione 3; (EMC) EN 61000-6-1:2007, EN 61000-6-3:2007 + A1:2011
+AC: 2012 EN 61000-6-3, Compatibilit elettromagnetica (EMC) - Parte 6-3: Standard generici - Standard di emissione per ambienti residenziali, commerciali e dell'industria leggera;
EN 61000-6-1, Compatibilit elettromagnetica Standard generico di immunit, Parte 1: Residenziale, commerciale e dellindustria leggera; (EMC) ETSI EN 301 489-1 V2.2.3 (2019-11) ETSI EN 301 489-3 V2.1.1 (2019-03) ETSI EN 301 489-17 V3.2.4 (2020-09) RED Articolo 3.1(b), EMC (RED) ETSI EN 300 328 V2.2.2 (2019-07) ETSI EN 301 893 V2.1.1 (2017-05) ETSI EN 300 440 V2.2.1 (2018-07) RED Articolo 3.2, Radio (RED) EN 50566:2017 EN 50663:2017 EN 62479:2010 RED Articolo 3.1(a), Salute (RED) EN 62368-1:2020+A11:2020 EN IEC 62368-1 Apparecchiature audio/video, per la tecnologia dell'informazione e della comunicazione, Parte 1-Requisiti di sicurezza (LVD-Sicurezza) Direttiva 2006/42/CE del Parlamento Europeo, Allegato I Direttiva 2006/42/CE del Parlamento Europeo, Allegato I Requisiti essenziali di sicurezza e di salute relativi alla progettazione e alla costruzione delle macchine; (MD) EN 60204-1:2018 EN 60204-1:2018, Sicurezza del macchinario - Equipaggiamento elettrico delle macchine, Parte 1: Requisiti generali (MD) ISO 13849-1:2015 ISO 13849-1:2015, Sicurezza del macchinario - Parti di un sistema di comando legate alla sicurezza - Parte 1: Principi generali di progettazione (MD) EN ISO 12100:2010 EN ISO 12100:2010, Sicurezza del macchinario - Principi generali di progettazione - Valutazione e riduzione del rischio (MD) Direttiva 2011/65/UE Direttiva RoHS 2011/65/UE e direttive di modifica (UE) 2015/863 sul contenuto di Piombo, Cadmio, Mercurio, Cromo esavalente, PBB e PBDE, Ftalati (DBP, BBP, DEHP, DIBP) (RoHS). Direttiva 2012/19/UE Direttiva RAEE 2012/19/UE (RAEE)
(EC) No 1907/2006 Agenzia europea per le sostanze chimiche (ECHA) in merito al Regolamento (CE) n. 1907/2006 e alle direttive delegate relative al REACH. (REACH) La documentacin tcnica se conserva en la direccin del fabricante. Shenzhen Snapmaker Technologies Co., Ltd. CHEN XUEDONG / CEO Fecha de emisin: 15.07.2022 Lugar de emisin: SHENZHEN, CHINA 14 it Etichette della stampante J1 Attenzione a potenziali pericoli. Sulla lastra di vetro PEI e sul letto riscaldato Non toccare. Sulla lastra di vetro PEI e sul letto riscaldato Maneggiare con cura oggetti fragili. Sulla lastra di vetro PEI Non stampare su questa superficie. Sul letto riscaldato Non appoggiare oggetti in questo punto. Sul pannello inferiore Evitare il contatto con superfici calde. Sugli estrusori, sulla lastra di vetro PEI, sul letto riscaldato e sul pannello superiore Fare attenzione a non schiacciare le mani. Sul pannello inferiore Specifiche Propriet di stampa Tecnologia Fabbricazione di filamenti fusi (FFF) Sistema di estrusione Doppio estrusore indipendente (IDEX) Modalit di stampa 1.Modalit standard 2.Modalit backup 3.Modalit copia 4.Modalit specchio Volume di stampa (L P A) Modalit standard e backup: 300 mm 200 mm 200 mm Modalit copia: 160 mm 200 mm 200 mm Modalit specchio: 150 mm 200 mm 200 mm Velocit di stampa 10 mm/s100 mm/s Altezza dello strato (con ugello da 0,4 mm) 0,05 mm 0,3 mm Piano di stampa Diametro dellugello Lastra di vetro PEI 0,4 mm (incluso) Temperatura massima del letto riscaldato 100 Diametro del filamento 1,75 mm Materiali supportati PLA, ABS, HIPS, PC, TPU, TPE, PETG, ASA, PP, PVA, PA-GF, PA-CF, PA 0,2 mm, 0,6 mm, 0,8 mm (venduto separatamente) Temperatura massima dell'ugello 300 Rumorosit
< 50 dB (A) Connettivit Wi-Fi, cavo USB, chiavetta USB Propriet della macchina Dimensioni generali (L P A) 539 mm 401 mm 464 mm Peso netto 25 kg Schermo a sfioramento Sistema: Android Memoria 1 GB RAM, 8 GB eMMC Dimensione: 5 Risoluzione: 1280 720 pixel Condizioni operative Ambiente operativo Ambiente di conservazione Potenza Input Wi-Fi Temperatura: 10C35C Umidit relativa: 10%90% (senza condensa) Temperatura: -25 C55 C Umidit relativa: 10%90% (senza condensa) Tensione nominale: CA 100 V240 V, 50 Hz60 Hz Corrente nominale: max 4,4 A. Output max CC 24 V, 400 W. Protocollo 802.11a/b/g/n20/n40 Gamma di frequenza 2.400 GHz2.482 GHz, 5.150 GHz5.250 GHz, 5.725 GHz5.850 GHz Potenza di trasmissione (EIRP) Software 2,4 GHz: < 17.50 dBm (Stati Uniti & Canada) 5,2 GHz: < 12.50 dBm (Stati Uniti & Canada) 5,8 GHz: < 6.50 dBm (Stati Uniti & Canada) Software di slicing Lava Studio (o slicer di terze parti) Sistemi operativi supportati Windows, macOS Tipi di file supportati STL, OBJ, 3MF Tipi di file output Code G 15 zh-Hans zh-Hans https://snapmaker.cn
3D
- PEI Snapmaker
SDS
1. 2. 3. 4. FFF IDEX PEI PEI PEI Snapmaker Snapmaker
- Snapmaker
Snapmaker Snapmaker Snapmaker https://snapmaker.cn Snapmaker 3D Snapmaker 3D
16 300mm 200mm 200mm 160mm 200mm 200mm 150mm 200mm 200mm 10mm/s 100mm/s PEI 0.4 mm 0.05mm 0.3mm 0.4mm 0.2mm0.6mm0.8mm 100 300 1.75 mm PLA, ABS, HIPS, PC, TPU, TPE, PETG, ASA, PP, PVA, PA-GF, PA-CF, PA Wi-FiUSB U 50 dB(A) 539mm 401mm 464mm 25 kg Size: 5 in. System: Android Resolution: 1280 720 pixels 1GB RAM8GB eMMC 10C 35C 10%-90%
-25 55 10%-90%
802.11a/b/g/n20/n40 2.400 GHz2.482 GHz, 5.150 GHz5.250 GHz, 5.725 GHz5.850 GHz 2.4 GHz: < 17.50 dBm 5.2 GHz: < 12.50 dBm 5.8 GHz: < 6.50 dBm) Lava Studio Windows, macOS STL, OBJ, 3MF G Wi-Fi 17 PEI AC 100V 240 V50 Hz 60 Hz 4.4A DC 24V400W jp jp https://support.snapmaker.com
5150 5250 MHz Snapmaker J1 PEI PEI PEI PEI
- PEI 10 mm/s100 mm/s PEI
Snapmaker Snapmaker Snapmaker
3D Snapmaker Snapmaker Web https://
support. snapmaker.com
SDS Snapmaker 3D Snapmaker 3D
18 FFF IDEX 1. 2. 3. 4. 160mm 200mm 200mm 150mm 200mm 200mm 300mm 200mm 200mm 0.4mm 0.05 mm0.3 mm 0.4 mm 0.2 mm0.6 mm0.8 mm 100 300 1.75 mm PLA, ABS, HIPS, PC, TPU, TPE, PETG, ASA, PP, PVA, PA-GF, PA-CF, PA Wi-FiUSB USB
< 50 dB(A) 539mm 401mm 464mm 25 kg 1 GB RAM8 GB eMMC 5 Android 1280 720 10C35C 10%90%
-25 55 10%90%
AC 100 V240 V, 50 Hz60 Hz 4.4 A DC 24 V400 W 802.11a/b/g/n20/n40 2.400 GHz2.482 GHz, 5.150 GHz5.250 GHz, 5.725 GHz5.850 GHz 2.4 GHz: < 17.50 dBm 5.2 GHz: < 12.50 dBm 5.8 GHz: < 6.50 dBm) Wi-Fi EIRP Lava Studio OS Windows, macOS STL, OBJ, 3MF G 19 ko
- . EU 5150~5250MHz
https://support.snapmaker.com , "
. Snapmaker
- 3
. Snapmaker Snapmaker
. Snapmaker
- 3
. Snapmaker
, . Snapmaker
. https://support.snapmaker.com
- . 3D
- , PEI
(SDS) . J1 Snapmaker 3D
. Snapmaker 3D
. PEI
. PEI
, PEI , ,
. PEI
. 20
(FFF)
(IDEX) 1. 2. 3. 4.
: 300mm 200mm 200mm
: 160mm 200mm 200mm
: 150mm 200mm 200mm 10 mm/s100 mm/s PEI
(0.4mm ) 0.05 mm0.3 mm 0.4mm( ) 0.2mm, 0.6mm, 0.8mm( ) 100 300 1.75 mm PLA, ABS, HIPS, PC, TPU, TPE, PETG, ASA, PP, PVA, PA-GF, PA-CF, PA Wi-FiUSB USB
< 50 dB(A)
( ) 539mm 401mm 464mm 25 kg
: 5
: Android
: 1280 720 1GB RAM, 8GB eMMC
: 10C~35C
: 10%~90%( )
: -25 ~55
: 10%~90%( )
: AC 100V~240V, 50Hz~60Hz
: 4.4A DC 24V, 400W 802.11a/b/g/n20/n40 2.400 GHz2.482 GHz, 5.150 GHz5.250 GHz, 5.725 GHz5.850 GHz 2.4 GHz: < 1750 dBm (USA & Canada) 5.2 GHz: < 12.50 dBm (USA & Canada) 5.8 GHz: < 6.50 dBm (USA & Canada) Wi-Fi
(EIRP) Lava Studio( ) OS Windows, macOS STL, OBJ, 3MF G-code ko 21 MAKE SOMETHING WONDERFUL
1 2 | Label & Location | ID Label/Location Info | 488.63 KiB | July 11 2022 |
Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220425-16508E-RF FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925) LABEL AND LOCATION Page 1 of 1
1 2 | Attestation Letter | Attestation Statements | 79.27 KiB | July 11 2022 |
Shenzhen Snapmaker Technologies Co., Ltd. 4F & 5F, Building 13, Pingshan 1st Road, Nanshan District, Shenzhen, Guangdong, China Tel: 0755-26926117 Email: info@snapmaker.com Date: 2022-06-30 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:
Sincerely Yours, Signature:
Hazel Li Certification Engineer The RF Module, model SC20-W, which installed in our product 3D Printer, Model: J1, FCC ID:2AVDG-J1, support BDR (GFSK), EDR (/4-DQPSK, 8DPSK), BLE, 2.4G Wi-Fi, 5G Wi-Fi. For use in America and this module only supports 2.4G Wi-Fi, 5G Wi-Fi (5150-5250 MHz, 5725-5850MHz) band. The other 5G Wi-Fi (5250-5350MHz, 5470-5725MHz), BDR (GFSK), EDR (/4-DQPSK, 8DPSK) and BLE function has been shielded by the manufacturer by using the software.
1 2 | FCC Long Term Confidential Authorization Form | Cover Letter(s) | 81.81 KiB | July 11 2022 |
Shenzhen Snapmaker Technologies Co., Ltd. 4F & 5F, Building 13, Pingshan 1st Road, Nanshan District, Shenzhen, Guangdong, China Tel: 0755-26926117 Email: info@snapmaker.com FCC Confidential Authorization Date: 2022-06-30 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AVDG-J1 In accordance with Sections 0.457 and 0.459 of the Commissions Rules, Shenzhen Snapmaker Technologies Co., Ltd. hereby requests long-term confidential treatment of information accompanying this application as outlined below:
The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Block Diagram Schematics Operation Description Software Security Description Sincerely Yours, Signature:
Hazel Li Certification Engineer
1 2 | Power of Attorney Letter | Cover Letter(s) | 77.81 KiB | July 11 2022 |
Shenzhen Snapmaker Technologies Co., Ltd. 4F & 5F, Building 13, Pingshan 1st Road, Nanshan District, Shenzhen, Guangdong, China Tel: 0755-26926117 Email: info@snapmaker.com FCC Authorization Date: 2022-06-30 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:
We Shenzhen Snapmaker Technologies Co., Ltd., the undersigned, hereby authorizes Shenzhen Accurate Technology Co., Ltd. to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Shenzhen Accurate Technology Co., Ltd.on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature:
Hazel Li Certification Engineer QA-FR-170-B 7/29/2014
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2022-07-11 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
2 | 2412 ~ 2462 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2022-07-11
|
||||
1 2 | Applicant's complete, legal business name |
Shenzhen Snapmaker Technologies Co., Ltd.
|
||||
1 2 | FCC Registration Number (FRN) |
0032551707
|
||||
1 2 | Physical Address |
4F & 5F, Building 13, Pingshan 1st Road, Nanshan District
|
||||
1 2 |
4F & 5F, Building 13
|
|||||
1 2 |
Shenzhen, Guangdong, N/A
|
|||||
1 2 |
China
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
b******@baclcorp.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
2AVDG
|
||||
1 2 | Equipment Product Code |
J1
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
H****** L********
|
||||
1 2 | Title |
Certification Engineer
|
||||
1 2 | Telephone Number |
0755-********
|
||||
1 2 | Fax Number |
N/A********
|
||||
1 2 |
i******@snapmaker.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
1 2 | DTS - Digital Transmission System | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 3D Printer | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz and 40 MHz bandwidth modes. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Shenzhen Accurate Technology Co., Ltd.
|
||||
1 2 | Name |
L**** Z********
|
||||
1 2 | Telephone Number |
+86-7********
|
||||
1 2 |
q******@atc-lab.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | CC | 5180 | 5240 | 0.016 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15E | CC | 5745 | 5825 | 0.004 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2412.00000000 | 2462.00000000 | 0.0510000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC