RF BridgeR2 User manual V1.2 433MHz RF Bridge 433MHz RF Bridge
--------1-4 English---------5-8 FCC Warning----------9 SONOFF TECHNOLOGIES CO., LTD.
1.APP eWeLink Android & iOS 433MHz RF Bridge 2.
3.
(Touch)Wi-Fi
(Touch) 5Wi-Fi WIFI (
) GSM
+app 1 SONOFF TECHNOLOGIES CO., LTD.
(AP)
(AP) 1 5Wi-Fi5 Wi-Fi 2 app+
Wi-FiITEAD-******12345678app RF Bridge
:0 60s
16 RF Wi-Fi IEEE 802.11 b/g/n 2.4GHz RF BridgeR2 5V 1A 433MHz Android & iOS
-10~40 PC V0 62x62x20mm 2 SONOFF TECHNOLOGIES CO., LTD. RF() Wi-Fi() 433MHz RF Bridge 1Kg2
(AP) 433MHz433MHzWi-Fi433MHz
3 SONOFF TECHNOLOGIES CO., LTD. 5Wi-Fi
(Touch) 1-2 Wi-Fi 1. 2Wi-Fi Wi-Fi. 5GWi-Fi2.4GWi-Fi. MAC 2. 2Wi-Fi Wi-Fi 4 SONOFF TECHNOLOGIES CO., LTD. English Operating Instruction 1. Download eWeLinkAPP eWeLink eWeLink Android & iOS 2. Power on After powering on, the device will enter the quick pairing mode (Touch) during the rst use. The Wi-Fi LED indicator changes in a cycle of two short and one long ash. The device will exit the quick pairing mode (Touch) if not paired within 3mins. If you want to enter this mode, please long press the pairing button for about 5s until the Wi-Fi LED indicator changes in a cycle of two short and one long flash and release. 3. Add Bridge 433MHz RF Bridge 5 Add Device Quick Pairing WIFI devices can be added in this mo de(make sure the device is in pairing mode). Scan QR code GSM devices and devices with QR co de can be added in this mode. Sound Pairing Add device in this mode if your devic e support this feature. Tap + and select Quick Pairing, then operate following the prompt on the APP. SONOFF TECHNOLOGIES CO., LTD. English Compatible Pairing Mode If you fail to enter Quick Pairing Mode (Touch), please try Compatible Pairing Mode to pair. 1 Long press Pairing button for 5s until the Wi-Fi LED indicator changes in a cycle of two short ashes and one long ash and release. Long press Pairing button for 5s again until the Wi-Fi LED indicator ashes quickly. Then, the device enters Compatible Pairing Mode. 2 Tap + and select Compatible Pairing Mode on APP. Select Wi-Fi SSID with ITEAD-****** and enter the password 12345678, and then go back to eWeLink APP and tap Next. Be patient until pairing completes. Add sub-devices RF Bridge Add Remote Save Learn Remote Added:0 No remote.Please add. Add 1-button 2-button 3-button 4-button Curtain Alarm 60S left to press the remote button or trigger the sensor Exit Tap "+" and select the remote controller type, then a "Beep" indicates that the device enters quick pairing mode. Proceed to operate on the sub-device to pair and
"Beep Beep" indicates that the pairing is successful. Please refer to the user manual of the sub-device for pairing method. The device can add up to 16 sub-devices. Specifications RF BridgeR2 5V 1A 433MHz IEEE 802.11 b/g/n 2.4GHz Model Input RF Wi-Fi Material Dimension Operating systems Android & iOS Working temperature
-10~40 PC V0 62x62x20mm 6 SONOFF TECHNOLOGIES CO., LTD. English Product Introduction RF LED indicator(Red) Wi-Fi LED indicator(Blue) 433MHz RF Bridge Input Pairing button The device weight is less than 1 kg. The installation height of less than 2 m is recommended. LED indicator status instruction LED indicator status Status instruction Blue LED ashes (one long and two short) Quick Pairing Mode Blue LED flashes quickly Compatible Pairing Mode (AP) Blue LED keeps on Device is connected successfully Blue LED flashes quickly once Unable to discover the router Blue LED flashes quickly twice Connect to the router but fail to connect to Wi-Fi Blue LED flashes quickly three times Upgrading Red LED flashes quickly Searching and adding ... Features This is a 433MHz RF bridge with multiple features that allows you to connect a variety of 433MHz wireless devices through switching 433MHz to Wi-Fi. You can set schedules, countdowns, alarm notications and more. Remote Control Single/Countdown Timing Voice Control Share Control Sync Status Alarm notication Smart Scene Camera Feature 7 SONOFF TECHNOLOGIES CO., LTD. English Factory Reset Long press the pairing button for about 5s until the Wi-Fi LED indicator changes in a cycle of two short and one long ash and release, then the reset is successful. The device enters quick pairing mode (Touch). Please reset the device to factory defaults if you want to change the Wi-Fi network, then reconnect the new network. Common Problems Q: Why my device stays Oine?
A: The newly added device needs 1 2mins to connect Wi-Fi and network. If it stays oine for a long time, please judge these problems by the blue Wi-Fi indicator status:
1. The blue Wi-Fi indicator quickly ashes once per second, which means that the switch failed to connect your Wi-Fi:
Maybe you have entered a wrong Wi-Fi password. Maybe there's too much distance between the switch your router or the environment causes interference, consider getting close to the router. If failed, please add it again. The 5G Wi-Fi network is not supported and only supports the 2.4GHz wireless network. Maybe the MAC address ltering is open. Please turn it o. If none of the above methods solved the problem, you can open the mobile datanetwork on your phone to create a Wi-Fi hotspot, then add the device again. 2. Blue indicator quickly ashes twice per second, which means your device has connected to Wi-Fi but failed to connect to the server. Ensure steady enough network. If double ash occurs frequently, which means you access an unsteady network, not a product problem. If thenetwork is normal, try to turn o the power to restart the switch. 8 SONOFF TECHNOLOGIES CO., LTD. FCC Warning FCC Warning Changes or modications not expressly approved by the party responsible for compliance could avoid the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 9 Hereby, Shenzhen Sono Technologies Co., Ltd. declares that the radio equipment type RF BridgeR2 is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address:
https://sonoff.tech/usermanuals For CE RED:
TX Frequency WiFi: 2412-2472MHz SRD: 433MHz RX Frequency WiFi: 2412-2472MHz SRD: 433MHz Output Power 802.11 b: 15.67dBm 802.11 g: 5.93dBm 802.11 n20: 10.91dBm SRD: -8.52dBm Shenzhen Sono Technologies Co., Ltd. 1001, BLDG8, Lianhua Industrial Park, shenzhen, GD, China ZIP code: 518000 Website: sono.tech MADE IN CHINA