SNZB-01 User manual V 1.0 Wireless Switch
-------1-6 English-------7-12 SONOFF ZigBee ZigBee 3.0 1. APP eWeLink eWeLink
1 2. ZBBridge
:0
CR2450 3V eWeLink APP
"" "RST"
5LED3 2 SONOFF ZigBee ZBBridge
:0
25s 3 eWeLink APP 3 1 23M 4
: SNZB-01
: CR2450
: 3V
: ZigBee (IEEE 802.15.4)
: -10-40
:10-90%RH()
: PC
: 43x43x16mm LED CR2450 3V 5 SNZB-01 5LED3 APP CR2450 3V 6 The device can be operated intelligently via working with the SONOFF ZigBee Bridge to communicate with other devices. The device can work with other gateways supporting ZigBee 3.0 wireless protocol. Detailed information is in accordance with the nal product. Pull out the battery insulation sheet Operation instruction 1. Download APP eWeLink eWeLink
7 2. Add sub-devices Connect the Bridge before adding the sub-device ZBBridge Added:0 No child device,please add. Add
CR2450 3V Access eWeLink APP, select the Bridge that you want to connect, and tap Add to add a sub-device. Then long press RST reset button on the device for 5s until the LED indicator ashes three times, which means the device has entered the pairing mode, and be patient until pairing completes. If the addition failed, move the sub-device closer to the Bridge and try again. 8 SONOFF ZigBee Bridge supports connecting multiple sub-devices at the same time. ZBBridge Added:0 Add Device Connecting Keep the device close enough to the hub. No child device,please add. Add
25s Looking for device 3 devices Found Power the Bridge on, access the Bridge page in the eWeLink APP, and tap Add. Then set the sub-device to be pair to the pairing mode, and be patient until the pairing completes. 9 Installation methods 1. Placed on the desktop for use. 2. Tear off the protective film of the 3M adhesive and stick the device on the desired area. Do not install on the metal surface, otherwise it will aect the wireless communication distance. 10 Specifications Model: SNZB-01 Battery model
: 3V Working voltage Wireless connection
: CR2450
: ZigBee (IEEE 802.15.4)
: -10-40 Working temperature Working humidity: 10-90%RH (non-condensing) Material: PC Dimension: 43x43x16mm Product Introduction Reset button LED indicator CR2450 3V Manual switch 11 Features SNZB-01 is a ZigBee low-energy wireless switch that allows you to move to any place. Peel and stick. Connect it with the Bridge and you can create a smart scene to trigger other devices. Low-energy Low battery notification Smart scenes Button action instruction You can select to click once, click twice or long press the wireless switch to control the connected device for various functions. Delete sub-devices Long press the reset button on the sub-device for 5s until the LED indicator flashes three times. In this case, the sub-device is deleted from the Bridge successfully. Users can delete sub-devices directly from the sub-device page on APP. CR2450 3V 12 FCC Statement FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna This equipment should be installed and operated with minimum distance 20cm between the or transmitter. radiator& your body. Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Shenzhen Sono Technologies Co., Ltd. 1001, BLDG8, Lianhua Industrial Park, shenzhen, GD, China ZIP code: 518000 Website: sono.tech MADE IN CHINA