SOUNDPEATS H1 100 80 90 x 84 mm H1 H1 MANUFACTURER Shenzhen SoundSOUL Information Technology Company Limited Room 1308-1309, Building B, Huihai Square, Chuangye Road, Longhua District, Shenzhen, China. 518109 support@soundpeatsaudio.com www.soundpeatsaudio.com XXX-XXXXXX FCC ID:2AFTU-DD013 MADE IN CHINA USER MANUAL | Manuel d'Utilisation | Bedienungsanleitung |
Manual de Instrucciones | Manuale di istruzioni | |
Pairing Reset Product Diagram Button Control Game Mode h s i l g n E h s i l g n E 1.Clear pairing record between the earbuds and your devices. 2.Place back both earbuds into the charging case and make sure they are in charging status. 3.Long press both multifunction buttons for 10s until LEDs indicators of earbuds flash in white twice, reset completed. SOUNDPEATS H1 Connected Wearing 1. The earbuds automatically pair to each other after being taken out from the charging case. LED on main earbud flashes in white and red, and LED on the secondary earbud stays in white. 2. Activate Bluetooth on the device, and choose "SOUNDPEATS H1" on Bluetooth list to pair. 2s 1.5s 3x 2x 1x 1x 2x 3x 1.5s 2s h s i l g n E h s i l g n E Function Power On Power Off Play/ Pause Volume -
Volume +
Previous Track Next Track Answer / Hang Up Phone Call Reject Phone Call Switch Between Two Active Calls Enter Pairing Mode Manually Activate Voice Assistant Game Mode Operation Automatically: Take out the earbuds from charging case Manually: Long press the multifunction button for 1.5s Automatically: Place the earbuds back into the charging docks Manually: Long press the multifunction button for 10s Manually: Double click the multifunction button on right earbud Click the left multifunction button once Click the right multifunction button once Long press the left multifunction button for 1.5s Long press the right multifunction button for 1.5s Double click the multifunction button on right earbud Long press the multifunction button for 1.5s Long press the multifunction button for 2s Long press the multifunction button for 6s Triple tap the MFB Double Click the multifunction button on left earbud SOUNDPEATS H1 uses the latest technology and is equipped with game mode. In the game modeearbuds delay will be greatly reduced to ensure the synchronization of the game audio and picture.Double tap MFB on the left earbud to turn on/off the game mode. The earbud prompts "Game Mode"when the mode is on, and prompts "Exit Game Mode" when it's off. h s i l g n E Q&A Q1: What do the charging LEDs tell while charging the case?
The LEDs indicators of charging case stay on while charging, and turn off after fully charged. level of the battery When charging case is 0-24%, The first LED at the bottom flashes in white the When the battery level of the charging case is 25%-49%, The first LED at the bottom lights up in white And the second LED flashes in white When the battery level of the charging case is 50%-74%, The first 2 LEDs at the bottom light up in white And the third LED flashes in white When the battery level of the charging case is 75%-99%, The first 3 LEDs at the bottom light up in white And the forth LED flashes in white h s i l g n E When the battery level of the charging case is 100%, All four LEDs at the bottom light up in white Q2: Why are the earbuds still connected to my phone after placing back?
1. The charging case is out of battery. The case will not turn off the earbuds if the case battery dead. 2. Please make sure the earbuds are placed properly in the charging case.And wipe the charging metal sheet and pin needle with a microfiber cloth to keep charging connectors on both the earbuds and charging case clean. Q3: Why the playtime does not match as advertised?
A single charge of the earbuds will not give you 40 hours playtime constantly. The earbuds work around 10 hours per charge with average use. The charging case provides another 3 recharges. Qualcomm aptX, Qualcomm TrueWireless and Qualcomm cVc are products of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm and Qualcomm TrueWireless are trademarks of Qualcomm Incorporated, registered in the United States and other countries. h s i l g n E Qualcomm FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifcations not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 1 2 3 4 5 6 7