SOUNDPEATS Sonic 100 80 90 x 84 mm Sonic Sonic MANUFACTURER Shenzhen SoundSOUL Information Technology Company Limited Room 1308-1309, Building B, Huihai Square, Chuangye Road, Longhua District, Shenzhen, China. 518109 support@soundpeatsaudio.com www.soundpeatsaudio.com FCC ID:2AFTU-DD014 MADE IN CHINA XXX-XXXXXX USER MANUAL | Manuel d'Utilisation | Bedienungsanleitung |
Manual de Instrucciones | Manuale di istruzioni | |
Pairing Reset Product Diagram Button Control Game Mode h s i l g n E 1. Clear the pairing record on your h s i l g n E devices. 2. Place back both earbuds into the charging case and make sure they are in charging status. 3. Press and hold both MFBs for 10s until both LEDs on the earbuds flash white twice, reset complete. SOUNDPEATS Sonic Connected Wearing 1. The earbuds automatically pair to each other after being taken out from the charging case. The indicator of the main earbud flashes in orange and white alternately, and the indicator of second earbud stays on white. 2. Activate Bluetooth on the device, and hit "SOUNDPEATS Sonic" on Bluetooth list to pair. 2s 1.5s 3x 2x 1x 1x 2x 3x 1.5s 2s h s i l g n E h s i l g n E Function Power On Power Off Operation Auto: Take out the earbuds from the charging case Manually: Press and hold the MFB for 1.5s Auto: Place back into charging case Manually: Press and hold the MFB for 8s Single tap the MFB Double tap the left MFB Double tap the right MFB Press and hold left MFB for 1.5s Press and hold right MFB for 1.5s Single tap the right MFB Press and hold the MFB for 1.5s Press and hold the MFB for 2s Press and hold the MFB for 5s Triple tap MFB on right earbud Triple tap MFB on left earbud Play / Pause Volume -
Volume +
Previous Track Next Track Answer / Hang Up Phone Call Reject Phone Call Switch Between Two Calls Manually Enter Pairing Mode Activate Voice Assistant Game Mode SOUNDPEATS Sonic uses the latest technology and is equipped with game mode. In the game modeearbuds delay will be greatly reduced to ensure the synchronization of the game audio and picture. Triple tap MFB on the left earbud to turn on/off the game mode. The earbud prompts
"Game Mode" when the mode is on, and prompts "Exit Game Mode" when it's off. h s i l g n E Q&A Q1: What do the charging LEDs tell while charging the case?
The LEDs stay on while charging, and turn off after fully charged. When taking out/placing back the earbuds, the indicator of the headset will light up for 10s to show the current battery status of the charging case:
100%50% Shows Green 49%-10% Shows Yellow Below 10% Shows Red h s i l g n E When charging the charging case, the indicator will flash slowly:
Below 20% The indicator flashes in red slowly 20%-69% The indicator flashes in yellow slowly 70%-99% The indicator flashes in green slowly 100% The indicator stays on green Q2: Why are the earbuds still connected to my phone after placing back?
1. The charging case is out of battery. The case will not turn off the earbuds if the case battery is dead. 2. Please make sure the earbuds sit well in the charging case, and the charging contactors on both the earbuds and charging case are clean. If not, please try something like microfiber cloth to clean the contators. Q3: The battery life is not as advertised?
A single charge will not give you 45 hours playtime constantly. The earbuds work around 15 hours per charge with average use. The charging case provides another 2 recharges. Qualcomm aptX, Qualcomm TrueWireless and Qualcomm cVc are products of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm and Qualcomm TrueWireless are trademarks of Qualcomm Incorporated, registered in the United States and other countries. h s i l g n E Qualcomm FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifcations not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 1 2 3 4 5 6 7