FCC ID: 2A5IF-226 mouse

Wireless Bluetooth Mouse 226 Bluethooth BT OFF wirelessdualmodemouse MADE IN CHINA Bluetooth Mode ON/OFF Power Specification Working Manner: Bluetooth 5.0 Button: Left, Right, DPI Working Voltage: 4.5VDC~5.5VDC Working Distance: 10 m DPI: 1000-1200-1400-1600 Backlit LED: 7 Color Breathing Lights Battery: Rechargeable Lithium Battery Size: 113 x 58 x 26 mm Battery Specification Charging Time: 2-3 H Battery Capacity: 500 mAh Life Time: Over 30 days Low Power: LED blinks 1/ 2sec, stops after blinking 20 times. first time Please charge the mouse for 2 hours before the to use it. The blue light is on when charging. The blue light turns off automatically when fully charged. LED Optical Engine System Requirement Bluetooth Mode:

Bluetooth Version: Bluetooth 4.0 or above. System Requirement :Windows XP, Windows 7, Windows8, Windows 10 or later, Android 5.1 or later, Mac OS X 10.10 or later, iPad OS 13 or later. Receiver Package 1 x Rechargeable Wireless Mouse 1 x Micro USB Charging Cable 1 x USB Receiver (Placed on the bottom of the mouse) 1 x Type c to USB adapter 1 x User Manual 1 x Warranty Card Instructions Bluetooth Mode Laptop Bluetooth Mode:

Switch from "ON/OFF" button to up

(Bluetooth Mode). Turn on the laptop Bluetooth function:

Setting - Device - Add Bluetooth or Bluethooth BT O FF wirelessdualmodemouse MADE IN CHINA other Device - Click Bluetooth - Sear-ching"BT5.1 Mouse"and pair. Tablet Bluetooth Mode:

(Note: please make sure your tablet operating system is And

- roid 5.0 and later or iOS13 and later). Switch from "ON/OFF" button to left(Bluetooth Mode). Click "Settings"--"Bluetooth"--Turn on Bluetooth--Search

"BT5.1 Mouse" and pair. Note: if the Bluetooth cannot connect the mouse or the mouse key does not appear after connecting the Bluetooth, please activate it through this path: Setting - Accessibility - Touch -

Assistive Touch - Turn on"Mouse Key". Frequently Asked Questions It's out of power if the mouse LED lights stop. Please rech

- arge it. After completing the first pairing of the mouse and compu-

ter,you do not need to pair it again when you use it later. Turn the mouse switch to the position indicated by Bluetooth and double-click the right button to pair with your computer successfully. If the computer cannot find the Bluetooth mouse during pair-

ing, you need to confirm if the switch on Bluetooth mode,then power on the mouse again. Please confirm whether the Blue-

tooth mouse is connected to other computers. If it is already connected to other computers, please remove the connection firstly, and then follow the above steps to pair again. If you don't want to pair with the Bluetooth mouse, in the "

Bluetooth and other devices" interface, click the BT5.1 mouse to delete the device and select Yes. To save power and provide long-term usage, the wireless mouse will fall asleep after 10 minutes of no-operation. It can waken up by click any button. If you do not use the mouse for a long time, please turn off the"OFF" button to save power. Bluetooth Wireless Mouse 2.4GHz Bluetooth 226-JP DPI 2.4GHz, Bluetooth 5.0 4.5VDC5.5VDC 10 m DPI: 1000-1200-1400-1600 LED7

: 113 x 58 x 26 mm Bluethooth

& 2.4G BT OFF 2.4G wirelessdualmodemouse MADE IN CHINA Bluetooth

2.4G 23 500 mAh 30 LED1/2 1 x 1 x USB 1 x USB 1 x Type-C 1 x 1 x 2.4G 12 2.4GHz USB1 Bluetooth / 2.4GHz Bluetooth 2.4G Bluetooth Bluethooth & 2.4G BT OFF 2.4G wirelessdualmodemouse MADE IN CHINA 20 23 LED Bluetooth BluetoothBluetooth 4.0 Windows XPWindows 7Windows 8 Windows 10Android 5.1Mac OS X 10.10 iPad OS13 2.4GUSB USB Bluetooth Bluetooth ON / OFF Bluetooth Bluethooth & 2.4G BT O FF 2.4G Bluetooth

--Bluetooth

-Bluetooth-BT5. 1 wirelessdualmodemouse MADE IN CHINA Bluetooth Android 5.1 iOS 13 ON / OFFBluetooth)

-Bluetooth-Bluetooth-BT5.1

: Bluetooth

Bluetooth

USB USBC C-USB USB

) ON / OFF2.4G2.4GHz Bluetooth LED Bluetooth Bluetooth Bluetooth Bluetooth Bluetooth Bluetooth BT5.1 10 OFF Bluethooth & 2.4G BT O FF 2.4 G wirele ssd ualm odem o use MADE IN CHINA Bluethooth & 2.4G BT O FF 2.4 G wirele ssd ualm odem o use MADE IN CHINA This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment The devices has been evaluated to meet general RF exposure requirement the device can be used in portable exposure condition without estriction

Shenzhen south China yingcai technology co. LTD C5266091_X10_Ed.2 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2A5IF-226 To Whom It May Concern, Date: 07 Mar, 2022 Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No Short-Term Confidentiality NOTE 2 No No NOTE 1 NOTE 1 No No No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. special conditions

(See II. LONG-TERM Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. 1/1 C5266091_X10_Ed.2 short-term Confidentiality, the applicant requests the exhibits selected In case of above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: yahong hou Title:Mannager 1/1

C5266091_X8_Ed.1 Letter of Authorization Shenzhen south China yingcai technology co. LTD Company:Shenzhen south China yingcai technology co. LTD Address:102-301, Quewei Building, Building 42, Fumin Industrial Zone, Pinghu Community, Pinghu Street, Longgang District, Shenzhen Product Name:mouse Model Number: 226,225, 258, 108, 259 FCC Identifier: 2A5IF-226 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. is allowed to forward all Name: yahong hou Date: 07 Mar, 2022 Title:Mannager Signature of applicant:

1/1

Model difference declaration letter Differences Description We Shenzhen south China yingcai technology co. LTD state:

Product Model Name mouse 226,225, 258, 108, 259 The above product with same circuit, PCB layout, electrical parts, materials and wiring structures, the materials of decorative accessories is same, only different appearance shape and different color. Signatory Date: 03-07.2022

<Signature>

Nameyahong hou TitleManager CompanyShenzhen south China yingcai technology co. LTD Address: 102-301, Quewei Building, Building 42, Fumin Industrial Zone, Pinghu Community, Pinghu Street, Longgang District, Shenzhen