FCC ID: 2AS3I-AI5002 Throwback Wireless Headphone

AIWA Throwback Throwback Headphones Item: AI5002 Quick Start Guide WHATS INCLUDED AI5002 Headphones USB Charging Cable Quick Start Guide 2 extra sets of foam cushion covers A CLOSER LOOK Microphone L Micro USB Charging Port R Control Panel LED Indicator light CHARGING Insert one end of the included charging cable into the charging port on your headphones. Insert the other end into the USB port of a computer or suitable USB charging adapter. Charging (Indicator is RED) Charging Complete (Indicator O) POWERING ON/OFF Touch & Hold 5 seconds Touch and hold the Control Panel area for approximately 5 seconds to power on or power o your headphones. LISTENING TO MUSIC touch touch twice touch three times Touch the Control Panel once to play or pause music. Touch the Control Panel twice to play the next song. Touch the Control Panel three times to play the last song played. ADDITIONAL FEATURES X Touch the Control Panel once to pickup an incoming phone call. Touch and hold for approximately 2 seconds to reject an incoming phone call or end a phone call. Touch and hold the Control Panel for 2 seconds to access your phones vocal assistant. SAFETY PRECAUTIONS When using your headphones, basic safety precautions should always be followed including:

1. READ ALL INSTRUCTIONS BEFORE USING YOUR HEADPHONES. 2. Do not submerge your headphones in water. 3. Only clean using a clean, soft cloth. 4. Do not allow children or the inrm to play with this product. Parental supervision is advised. 5. Do not expose this product to excessive heat or re. 6. Do not expose this product to temperatures above 100F. Keep out of direct sunlight. 7. Do not attempt to repair this product yourself. Contact a qualied service center if the product is in need of service. 8. Do not drop, crush, or expose this product to excessive physical force. 9. This product is not intended for commercial use. 10. When charging, keep all charging cables well ventilated. Do not keep your charging cable in contact with ammable materials such as bedding, linens or synthetic fabrics. Maintenance and Care

-Use a soft cloth or paper towel to clean your headphones. Never use any harsh chemicals or detergents for cleaning. Make sure your headphones are dry before charging.

-When your headphones are not in use, they should be stored in a cool, dry place.

-Never tug or yank on a cable while it is connected to your headphones. Connect and disconnect cables as carefully as possible.

-Never expose your headphones to high temperatures, extreme cold.

-Please recycle or dispose of your headphones properly based on the laws and rules of your municipality. Contact local recycling facilities and/or the manufactur-

er of your headphones for further information. Warning To prevent possible hearing damage, do not listen at high volume levels for long periods. For your own safety, please be aware of your surroundings when using these headphones. FCC STATEMENT Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:

The device has been evaluated to meet general RF exposure requirement. The device can be used in the portable exposure condition without restriction. SPECIFICATIONS BLUETOOTH VERSION: 5.4 WORKING DISTANCE: UP TO 10 METERS CHARGE TIME: APPROXIMATELY 2 HOURS PLAY TIME: UP TO 40 HOURS*

BATTERY 3.7V 300mAh Lithium Ion Battery CHARGING VOLTAGE: 5V DC CHARGING INTERFACE: Micro USB

*Applicable at 50% of maximum volume. Results will be lower when volume is higher. WARRANTY This warranty covers the original consumer purchaser only and is not transferable. This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. What Is Not Covered By Warranty Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions from other than normal use, including, but not imited to, repair by unauthorized parties, tampering, modication or accident. To Obtain Warranty Service and Troubleshooting Information:

Call 1-800-592-9541 or visit our website at www.aiwa.co. To receive Warranty service along with the name and address of an authorized product service center, the original consumer purchaser must contact us for problem determination and service procedures. Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that the product is within the applicable Warranty period(s), MUST be presented in order to obtain the requested service. It is your responsibility to properly package and send any defective products along with a dated copy of proof of purchase, a written explanation of the problem, and a valid return address of the authorized service center at your expense. Do not include any other items or accessories with the defective product. Any products received by the authorized service center that are not covered by warranty will be returned unrepaired. AIWA Edison, NJ 08817 2024 Aiwa Acquisitions LLC. All rights reserved. AIWA and associated marks are owned by Aiwa Acquisitions and used under license. Keep all relevant information for future reference. The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Sakar International is under license.

(Shenzhen Sowak Electronic Co., Ltd) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-21-2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID2AS3I-AI5002

[Shenzhen Sowak Electronic Co., Ltd] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely,

(Applicant signature)

(Yi Zhang) Rev 1/26/2023

(Shenzhen Sowak Electronic Co., Ltd) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-21-2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID2AS3I-AI5002

[Shenzhen Sowak Electronic Co., Ltd] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely,

(Applicant signature)

(Yi Zhang) Rev 1/26/2023

Shenzhen Sowak Electronic Co., Ltd Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AS3I-AI5002 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram Schematics Operational Description File Name Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, We also requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant Date of Equipment Authorizations. Exhibit Type File Name Sincerely, Yi Zhang 2024.03.21 Rev 11/20/07

Shenzhen Sowak Electronic Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: 2024.03.21 SUBJECT: FCC ID: 2AS3I-AI5002 To Whom It May Concern:

I, the undersigned, hereby states this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, and will apply the Supplier's Declaration of Conformity procedure to the class B computer peripheral portion of this composite device. I understand the following FCC requirements:

1. Devices subject to the SDoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm (Select the

"accredited" option to search for FCC recognized accredited test firms.) 2. Pt 2.1077 contains the list of information that must be included in the Supplier's Declaration of Conformity, which must be supplied with each product sold. The SDoC compliance info shall be included in the Users Manual or as a separate sheet. The info must contain the name, address, and phone number of the responsible party, which must be located within the United States. According to 2.909(b), the responsible party is either the Manufacturer or if the product is imported the Importer. Regards, Shenzhen Sowak Electronic Co., Ltd

Yi Zhang

Shenzhen Sowak Electronic Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date:2024.03.21 SUBJECT: FCC Application for FCC ID: 2AS3I-AI5002 To Whom It May Concern:

We, the undersigned, hereby authorize Sam Lv. at EMTEK (DONGGUAN) CO., LTD. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by EMTEK (DONGGUAN) CO., LTD.on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Sincerely, Yi Zhang 2024.03.21

Shenzhen Sowak Electronic Co., Ltd

[Shenzhen Sowak Electronic Co., Ltd]

[No. 88, Jinkang Road, Jinsha Community, Kengzi Street, Pingshan Dist., Shenzhen, Guangdong, China]

Date: [2024.3.21]

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: [2AS3I-AI5002]

FRN: [0028404507]

US Agent Attestation Statement / Part 2.911(d)(7)

[Shenzhen Sowak Electronic Co., Ltd] certifies, that as of [2024.3.21], we have designated Sakar International , Inc to accept service of process on our behalf for FCC ID: [2AS3I-AI5002].

[Shenzhen Sowak Electronic Co., Ltd], accepts to maintain an agent of service of process in the United States for no less than one year after her the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proeitceeding involving the equipment, whichever is later. Sakar International , Inc, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of

[Shenzhen Sowak Electronic Co., Ltd] for FCC ID:[2AS3I-AI5002]. Designated Agent Information:

Company Name: Sakar International , Inc FRN: 0028102671 Address: 195 Carter Drive Edison, Edison,NJ 8817 United States Contact Person: DAWN LEITAO Phone: 800637-1090 Email:dleitao@sakar.com Sincerely, Company: [Shenzhen Sowak Electronic Co., Ltd] Designated Agent: [Sakar International , Inc]

Company Representative: [Yi Zhang]

Signature:

Designated Agent Representative: [DAWN LEITAO]

Signature: