FCC ID: WOX-M6AG 2.4G Wireless Mouse

The RF2.4GHz Optical mouse use two AAA alkaline batteries. 1.If you want t o use the mouse,pls take out t he receiver (shown i n picture ) a nd Installing Batteries i n the Mouse Step 1 . Open the battery compartment Step 2.Insert the batteries a s shown inside the battery compartment Step 3.Replace the cover connect i t to computer;

2.If you want t o stop using the mouse, pls store the receiver onto the mouse

(shown i n picture ) ;

Obtain the receiver on the mouse The receiver i s insert t o USB port immediate, or by a extra USB cable. Nano receiver USB port Connect the USB plug t o USB port o f your computer Mouse:

When the enduser finds the wireless mouse doesnt work, please check:

1. Whether the battery i s used out, i f yes, please replace with new battery;

2. If the led o n mouse bottom i s off, please d o the following steps t o recovery the default setting (automatic pairing):

Step one: unplug and plug again the nano receiver onto a n available USB port o f computer, Step two: make the wireless mouse close t o the nano receiver (within 1 0 cm), t ake out the battery and install the battery again inside the Battery compartm ent, i f we find the Led o n the mouse bottom on, w e can start using the wireless mouse again. 1.Without using the mouse for 1 minute, the mouse will g o into sleep mode level1.You can move i t to wake u p the mouse. The Red LED i s still on. 2. Without using the mouse for 1-8 minutes, the mouse will g o into sleep mode level 2 . You can move i t to wake u p the mouse. The Red LED keep flashing. 3.Without using the mouse for more than 8 minutes, the mouse will g o into deep sleep mode. The LED turn o ff automatically. Nano receiver State o f standby and wake u p the mouse Without any clicks o r scroll movement for 8 minutes, the mouse will g o Model: M6AG into standby mode. Click any button o r scroll the wheel t o wake u p the mouse. Under this economize mode, the optical Red LED will turn o f automatically a nd the mouse wont respond b y moving it. RF2.4GHz Optical Mouse FCC warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the device and receiver.

--Connect the device into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

me OL 02 OF Ov 05 TW OF 02 OF Ov OS 09 02 08 06 QO}

OO MN mmm tn mim Mmmm 2

[708 0 OF 8 op OL op op OOo

December 18, 2023 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Shenzhen Timeway Testing Laboratories/ Zone C, 1st Floor, Zone C, 1st Floor, Block B, Jun Xiang Da Building, Zhongshan Park Road West, Tong Le Village, Nanshan District, Shenzhen, China (Name of Agent company name and address) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with S h e n z h e n S Q T E l e c t r o n i c s C o . , L t d /

ZhengChengFeng TechnologyZone Xinsha Road, ShaYi Village, Sha jing Town, Baoan Area, Shenzhen, China, 508040

<Signature>

NameSam Qu TitleManager Applicant CompanyShenzhen SQT Electronics Co.,Ltd

December 18, 2023 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: WOX-M6AG Product Name: 2.4G Wireless Mouse Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:

Schematics Block diagram Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors.

<Signature>

NameSam Qu TitleManager Applicant CompanyShenzhen SQT Electronics Co.,Ltd

Shenzhen SQT Electronics Co.,Ltd Statement We Shenzhen SQT Electronics Co.,Ltd Hereby Declare that The product 2.4G Wireless Mouse, models no. SM-M6AG, iBall Cherry, iBall Grabit, iBall Pearl, iBall Ferrari,iBall Blossom, iBall Berry, iBall RED, iBall Rabbit, iBall Softy, iBall Bunny, M6AG are all identical in interior structure, electrical circuits and components, and just the model names are different for the marketing requirement. Your assistance on this matter is highly appreciated. Yours sincerely,

<Signature>

NameSam Qu TitleManager Applicant CompanyShenzhen SQT Electronics Co.,Ltd

Shenzhen SQT Electronics Co.,Ltd Covered Equipment Certification Attestation Letter 12/18/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: WOX-M6AG Shenzhen SQT Electronics Co.,Ltd (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not covered equipment. Shenzhen SQT Electronics Co.,Ltd (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Signed:

Printed name: Sam Qu Title: Manager Company Name: Shenzhen SQT Electronics Co.,Ltd Date: 12/18/2023

Shenzhen SQT Electronics Co.,Ltd U.S. Agent Designation for Service of Process -

Certification Attestation Letter 12/18/2023 TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTN.: Reviewing Engineer FCC ID: WOX-M6AG FRN of Grantee: 0018089821 Per section 2.911(d)(7) of the FCC rules, Shenzhen SQT Electronics Co.,Ltd (the applicant) certifies that the equipment for which authorization is sought is designated to the following U.S. agent* for service of process:

Company Name: Stariver Consulting Company FCC Registration Number (FRN): 0033400433 Company Address: 2363 James St #1098 Syracuse, NY 13206, USA Agent Name: Chong He Agent Email Address: stariverusagent@gmail.com The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed:

Agent Signed:

Signed:

Printed name: Sam Qu Title: Manager Company Name: Shenzhen SQT Electronics Co.,Ltd Date: 12/18/2023 Signed:

Printed name: Chong He Title: Manager Company Name: Stariver Consulting Company Date: 12/18/2023

* the applicant must designate a contact located in the United States for purposes of acting as the applicants agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process.