SM-388AG RF2.4GHz Optical Mouse SPECIFICATIONS SM-388AG R F channel : 34 channels ID numbers: 24 bits R F bandwidth : 2.0mHz Speed of transmit: 1M bps R F output power : 0dBm Receiver of sensitive: -85dBm Resolutions: 800~1200~1600 DPI Sensor Tracking Speed: 30 inches / Second
+
Battery Battery type:one AA alkaline for mouse Battery consumption:
mouse:1.5V Operating Mode: 12 mA (working) Sleep Mode 1: 1.0 mA(after 5second non-active) Sleep Mode 2: 0.8 mA(after 59 non-active) Sleep Mode 3: 0.06mA(after 8 minutes around non-active and LED turn off) second Part 4.0: Reliability Mouse Button Switch Activation: 3,000,000 cycle Scroll Wheel encoder Activation: 100,000 cycle Operating temperature: -5 + 40 degrees celsius Operating humidity: 20% - 90%
Part 5.0 System Requirement Windows 2000, Windows xp. Windows ME. Windows VISTA, Windows 7/8/10 Part 1.0: General Features Mini size, best for notebook users or kids
-
- Totally Wireless freedom
- 2.4GHz FSK Autolink technology
- 34 two way R F channels
- Operation distance of 6~10 meters for mouse
- 800~1200~1600
-
3 level power saving mode
- NANO receiver on mouse
- Auto power save model Part 2.0: Physical characteristics DPI optical precision switchable 95.40 95.40 75.30 75.30 39.80 39.80 Mechanical Performance Operating force of mouse buttons Operating force of wheel scrolling 70 15gf 20 10gf Buttons Mouse : 6 buttons with scrolling wheel Weight:
Mouse: 85 5 g (battery included) Receiver: 2 1 g Part 3.0: Electrical Specification 3000 Interface : USB 1.1 Sensor report rate on mouse: times per second Operation angle: 360 degrees Operation distance: 6~10 meter mouse Receiver power requirement: 5V DC from USB port R F frequency: 2.4 Ghz (2.408~2.474 Ghz) R F modulation : F S K Auto-Link Hopping type : FHSS (frequency hopping spread spectrum) PDF "pdfFactory" www.fineprint.cn REV: 1.00 FCC STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC RF Exposure The device has been evaluated to meet general RF exposure requirement. The device can be used in portable condition without restriction.