FRONT www.brookstone.com WIRELESS MULTIMEDIA KEYBOARD & MOUSE Product Description BRK2100 The BROOKSTONE trademarks, names and logos are owned by BKST Brand Holdings LLC. 2019 . All rights reserved, manufactured, marketed, and distributed by Lifeworks Technology Group LLC., used under license. Made in China BACK Product Specs ON/OFF OFF ON Wireless Trackpad Keyboard AAA AAA Lifeworks Technology Group LLC New York, NY 10018 Customer Service: 877-5430-3540 Nano USB Reciever A A A A A A
(2) AAA batteries 1 Health and Safety Warnings FCC Statement Battery-Powered Devices Use of rechargeable or disposable batteries in an improper manner may result in battery fluid leakage, overheating or explosion. Battery fluid is corrosive, may be toxic, can cause skin and eye burns, and is harmful if swallowed. Radio Frequency Technical Specifications: 2.4 GHz Devices Non-specific short range device. RF output power meets all SRD requirements. Warning Improper setup, use and care of this product can increase the risk of serious injury death or device damage. Read and keep this guide and all other printed guides for future reference. For updated guides or replacements go to golifeworks.com Do Not Attempt Repairs. Do not attempt to take apart, open, repair, service or modify the device(s). Doing so may risk electric shock or other hazard. Evidence of any attempt to open or modify the device, including any peeling, puncture or removal of labels, will void the Limited Lifetime Warranty. Safety Instructions Keep the keyboard away from sharp objects that could damage it. Do not put heavy objects on the keyboard. Do not stretch, twist or apply force to the keyboard. To clean the keyboard, gently wipe it using a moist cotton cloth. Make sure the keyboard is turned off before cleaning. Do not use liquid cleanser. This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction guide, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult a service representative for help. Properly shielded and grounded cables and connectors must be used in order to comply with FCC emission limits. LifeWorks is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the users authority to operate the equipment. Responsible party:
LifeWorks Technology Group LLC 530 7th Ave., New York, NY 10018 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE Printed in China Windows, 2000, XP, Vista, Windows 7, and Windows 8 are registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Mac * is a trademark of Apple Inc., registered in the U.S. and other countries. All other brands and logos are trademarks of their respective companies. Operation Installation Steps:
1. Slide off battery cover 2. Insert AA battery into the battery compartment (back of keyboard) and put cover back on 3. Switch keyboard on 4. Connect nano USB receiver to an available USB port on your computer. The keyboard and mouse automatically connect to the USB receiver. Power indicator will flash red, then it is connected successfully. 5. Start using your trackpad keyboard!
NOTE: if keyboard fails to connect, press ESC+K, forcing it to enter pairing mode. 1 3 OFF ON 2 AAA AAA 4 2 A A A A A A 2 4 4 SYSTEM REQUIREMENTS:
Works with Windows XP/7/8/10 & MAC OS SPECIFICATIONS: KEYBOARD FEATURES: Works up to 10m range USB-A Nano receiver SIGNAL:
2.4GHz wireless frequency POWER:
2x AAA batteries (included) Auto wake/sleep COMPATIBILITY: Plug and play CONNECTION: USB-A Nano receiver Tips and Troubleshooting Tips Auto-sleep and power saving function: The keyboard will enter sleep mode when idle for 10 minutes. To activate it, press any key and wait for 3 seconds. Please turn off the power if youre traveling or not using the keyboard for a long time. Troubleshooting Ensure the USB nano receiver is connected to your computer. If it is, try connecting it to a different USB port. Ensure that the batteries are charged and inserted correctly. Ensure that the sensor on the bottom of the mouse is clean. Restart your computer. If keyboard fails to connect, press ESC+K, forcing it to enter pairing mode. 5 Battery Cover AAA Battery Compartment Nano Receiver Storage 3