Z27 Smart band User guide Band usage instructions Component introduction Display screen Wristband Charging instruction Button Charging CLIP charging(charging mode as shown below) Plug the USB interface into the charging stand for charging, and the charging voltage is 5V. Wearing method 1. The best wearing positioning of the wristband should be after the ulnar styloid process;
2. Adjust the size of the wrist according to the adjustment slot, buckle upthe wristband;
3. Keep the sensor stay close to your skin and avoid moving. Ap Installation Malleolus ulnaris Left hand Scan the QR code below or enter any major App markets to download and install "Power Fit"
p Power on/Power off 1.When powered off charge or long press the function button for 3 seconds can turn on the band with vibration 2. When powered on, after the switch to the shutdown interface, long press the function button for 3 seconds can turn off the band with vibration. Band operation 1. Short touch function button to turn on the screen or switch display when the band is turned on;
2. No operation default fivesecond screen standby display off, users can connect to the mobile APP to modify the idle time before turning off the display;
3. The band Factory setting by default turned on for 24 hours heart rate monitoring, and the user can select in the APP device interface to turn it on or off in the general settings. Distance interface The interface is based on the number of walking steps, the personal height that user set up in the App, calculate the distance travelled on the day then display it. Calorie interface T h e interface is based on the personal height and weight that user setup in the App, calculate the consumption of the total number of calorie on the day then display it. number of walking steps, symbol Route Calorie symbol Heartbeat interface In the heart rate monitoring interface, it would automatically enter the heart rate detection mode, supporting dynamic realtime heart rate detection. Under the heart rate detection mode, the battery life of the band will decrease. Heart rate detection precautions:
When it is detecting, the symbol will beat and the heart rate LED light on the back of the band will light up;
When it is detecting, The sensor should stay close to your skin, so as to avoid external light affecting the accuracy of the test;
The detection area should be kept clean, sweat or stains can affect the detection results. Movement Distance Unit Heat consumption Unit Hear rate symbol t Heart rate value Unit Sports interface In the sports interface, you could press and hold for three seconds to enter the specific category of sports interface, click to switch into different kind of exercise including skipping,running, cycling, etc. Long press and hold for three seconds on the specific sports interface to enter the sport details Interface, also press and hold for three seconds to exit the current exercise. More function interface In the more function interface long press and hold for three seconds to enter the sub menu interface for more function operations. More symbol More icons Exercise time Heart rate Skipping frequency Steps Calorie Distance Message interface In the message interface, the band will save 8 pieces of message pushed in APP recently. Long press 3 seconds to view the message (if there is no message, it will be stopped in the message interface.). Click to turn to the next page. View all the information, and press and hold for three seconds to delete the current message, then to exit the message interface. Message icon Search phone interface When connected to the phone, long press and hold the phone interface for three seconds, the phone will ring a reminder. Search phone symbol Find phone icon Reset settings interface Long press and hold on the restore interface for three seconds, all data of the band will be cleared. As for the App, the data on the current day will be cleared. (The rest of the historical data will retain) Restore icon Product information interface In the product information interface, long press and hold for three seconds to view the firmware version number and Bluetooth address. Symbol of the product about About icon System requirements: iOS 8.0 or above; Android 4.4 or above, support Bluetooth 4.0. Device connection You need to connect to the APP for calibration that you use the band in the first time. After the connection is successful, the band will synchronize the time automatically. Otherwise, the step counting and sleep data will not be accurate. Shutdown interface In the shutdown interface, long press for more than three seconds to shut down the phone with vibration. Shutdown symbol Brightness adjustment interface In the brightness adjustment interface, long press and hold the brightness symbol for three seconds until it blinks, a single press can adjust different brightness, in the total of four levels of brightness. Brightness symbol off icon Luminance icon Precautions Open mobile APP Click the settings symbol My device (iOS) / Search device (Android) Click the search symbol in the top right Click the device Bluetooth connection : After the pairing is successful, the APP will save the Bluetooth address of the band automatically. When the APP is opened or running in the background, it will search the band and try to connect to it when found. Data synchronization : Manually pull down the screen on the home page to sync data;
the band can store 7 days of offline data, the more data, the longer the synchronization time, the longest is about 2 minutes, and there will mention "synchronization completed"
remind after the synchronization is completed. APP Function and setting Personal information and exercise goal You have to fill in your personal information after you enter the APP Please dry the band with the soft cloth before charging when the band is wet. Otherwise, it will corrode the charging contact point, causing a charging failure. Do not touch chemicals such as benzene, cleaning solvents, propanol, alcohol or insect repellent. Do not use this product in a highvoltage, highmagnetic environment. If you have a skin type which is sensitive to allergy reactions or wears the band too tightly, you may feel uncomfortable. Please dry the sweat on your wrist in time, and the strap exposed to soap, sweat, allergens or dirt for a long time may cause skin irritation and itching. If you use it frequently, it is recommended to clean the band every week. Wipe with a damp cloth and mild soap to clear up oil or dust. Do not wear a band to take a hot bath and swim. After showering, wipe the bracelet in time to keep it dry. Frequently Asked Questions My personal Able to set avatar-gender-age-height-weight, personal information for improving the accuracy of the data. Customize your daily sports goals through a reasonable exercise planning, able to help improve physical fitness. Reminder function Activate the reminder function needs to turn on the reminder switch in the APP setting centre and keep the mobile phone and the band in a state of successful connection of Bluetooth. Vibration to remind when new messages coming up. Phone call Message QQ WeChat Alarm clock Sedentary Other Bluetooth 4.0. 1. Due to the signal interference of the Bluetooth wireless connection,the connection time may vary in each time. If it is not connected for a long time, please make sure that the operation is carried out without the interference from the magnetic field or from multiBluetooth equipment. 2. Turn off Bluetooth and turn it on again. 3. Close the mobile background app or restart the phone. 4. Do not connect other Bluetooth devices to your phone at the same time. 5. Check whether the APP is running normally in the background, if it is not in the background, it may not be connected. Unable to detect the band?
Because the band is not detected by the mobile phone during the Bluetooth broadcast, please make sure that the band is charged and activated, and is also not bound to other mobile phones already. Then,you can put the band close to the mobile phone. If it still does not work, please turn off the Bluetooth of your phone and restart the Bluetooth after 20 seconds. Why has the wrist been worn tight when measuring heart rate?
The band uses the principle of light reflection. After the light penetrates the skin, the signal reflected the sensor is collected to calculate your heart rate. If you do not wear it tightly, ambient light will enter the sensor, which will affect the measurement accuracy. Incoming call reminder:
When calling in, the band will vibrate and display the name and number of the caller. If the APP turns on the "Call rejectionfunction, long press and holds the wristband function button to reject the call for threeseconds. SMS reminder : When receiving a text message, the band vibrates and displays a symbol to remind, click to view the text message content. QQ Reminder : When receiving QQ message, the band vibrates and displays a symbol to remind, click to view the QQ content. WeChat reminder: When receiving a WeChat message, the band vibrates and displays a symbol to remind, click to view the WeChat content. Smart alarm: Threealarm can be set. After setting, it will be synchronized to the band. The smart alarm clock is a silent alarm clock. When the alarm is activated, the band will initiate moderate vibration and support offline alarm reminder. Sedentary reminder: The default reminder interval is one hour; in the connected state, after the user is turned on, if the user does not exercise within one hour, the band will vibrate to remind the user to exercise. Other reminders: When receiving other messages such as emails, the band will vibrate and display another reminder symbol, click to view thecontent. Sleep detection function When you fall asleep, the band will determine to enter the sleep monitoring mode automatically, and detect the length of your deep sleep/ light sleep / awake time period, calculating your sleep quality; sleepdata can only be viewed on APP at this moment. Note: Sleep data will only be available when you wear the band to sleep. Why didn't I receive a reminder when the reminder function wasturned on?
Android phone: Make sure the phone and the band are connected. After connecting, enable the corresponding permissions in the phone settings, allow the "Power Fit"app able to access phone calls, text messages, contacts list, and keep "Power Fit"running in the background; if the phoneis installed with security software, add "Power Fit" as trustable. Apple mobile phone: If there is no reminder after connecting, it is recommended to restart the mobile phone to reconnect. When connecting the band in again, you must wait for the mobile phone to come up [Bluetooth Pairing Request], and click [Pairing] to have your reminder function available. Is the band waterproof?
Support IP67 waterproof and dustproof level (IP67 standard is capable in less than 35 Celsius degrees, and water depth is 1 meter for under 30 minutes). As usual, wash hands, raining, cold water shower and car wash can be worn at will. Does the Bluetooth connection need to be turned on all the time? Is there still data recording after disconnection?
Before the data is synchronized, data is retained on the main body of the band. (data can be retained for seven days). When the Bluetoothconnection between the mobile phone and the band is successful, the band data will be uploaded to the mobile phone automatically. Please synchronize the data to the mobile phone in time. Note: If you enable the call and SMS reminder function, you must keep the Bluetooth connected but alarm clock reminder is supported in offline. The band should avoid strong impact, extreme heat and exposure under the sunlight for a longterm. Do not disassemble, repair or modify the band yourself. This band is charged with 5V500MA. Overvoltage load power supply charging is not applicable. The suggested usage environment temperature should be 0 to 45 Celsius degree. Do not throw it into the fire to avoid explosion detonating. Is this too long to wait for the first time heart rate test?
For the first time to detect heart rate, it needs to collect longer signals depend on different groups of people, in order to calculate your heart rate accurately. What if the Bluetooth connection is not available?(Connection/reconnection failed or reconnection is slow) Confirm that your device is either iOS 8.0 or Android 4.4 or above, and also supports User Guide
) USB5V APP APP LED APP8 1. 2. 3. , APP Power Fit
/
1. 2. 3 3 1. 2. ,APP 3. 24APP APP iOS 8. 0Android 4. 44.0 A PP
. 5V500MA 0~45 APP iOSAndroid APPAPP APP7 2" "
APP APP
----
APP QQ
/
IOS8.04.44.0 1. 2. 3. 4. 5. APP 20 APP
""
QQ QQQQ
//
APP PowerFitAPP Power Power Fit Fit IP67IP6735130 FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Main function interface Connection symbol are main interfaces in the band. Long press for Main interface Ther three seconds on the main interface to select which specific interfaces to switch to. Single click to switch. Long press and hold for three seconds to confirm selecting the current main interface. After the APP is paired for the first time, the band will synchronize the time and date of the phone. Remind:
1. When it is not wearing, do not beat, and display the last heart rate value measured;
2. When it is wearing, beating, the heart rate value would be cleared and the measurement will be started, displaying the realtime heart rate value. rate value Heart Date The interface display steps, the band default step counter mode. when the band is worn on the wrist that the user walks and the arm swings, the band record walking step data according to the number of swings. Footsteps symbol Exercise steps Unit Specifications Device Type Smart Continuous Heart Rate Bracelet Type of battery Display TFT1.14 color screen Battery model Polymer 401727 Product weight 40g Battery capacity 140mAh Dimensions 64.8x21.8x11.9mm Input voltage DC 5.0V Waterproof rating IP67 Operating temperature 10~50 Wristband material TPU strap Packing list Host, manual,Charging CLIP Box 3 APP 1. 2. TFT1.14 401727 40g 140mAh 64.8x21.8x11.9mm DC 5.0V IP67 TPU
-10~50