Manual Product name: DK01A One hand Keyboard with converter function Product Picture:
Specification:
. Mechanical switches optional(Red/Blue/Green etc). 35Full anti-ghosting keys : ESC, F1, F2, F3, F4, ~, 1, 2 , 3, 4 , 5, Tab, Q, W, E, R, Caps, A, S, D, F, Shift, Z, X, C, turbo, Ctrl, Alt, Fn, Space, R3( Joystick Press ), G1, G2, G3, G4
. 3 different backlit lighting effects. Support 4 G-key macro setting. Detachable 3M charging cable and 1500mAh Li-battery. Ergonomic form factor with adjustable palm rest. Support Turbo function. LED lights & Indicators
. Hold FN and then press F2 for 4 different backlit brightness. Hold FN and then press 5 to switch 3 different lighting effects. Macro G1-G4 Setting:
Macro set multiple keyboard & mouse buttons into a single button (G1, G2, G3, G4). For example you can set UP, UP, DOWN, LEFT, RIGHT, X, Oto execute by press the G1 key on the keyboard. You can create up to 4 groups Custom macros and the macro can have up to 15 keys ( Except Turbo , FN key ) a. Hold FN and press G1 to enter Macro mode, keyboard backlit White keep on. b. Press action keys on keyboard(Support max 12 steps). c. Hold FN and press G1 to save and exit Macro mode. d. Press G1 to active Marco setting. Clear Macro setting, hold FN and press G1 to enter macro mode and then press G1 to save and exit. Same macro setting method for G2, G3, G4. Turbo Setting Setting Method
. Hold and press Turbo to enter setting mode, keyboard backlit turns White. Press Action key in keyboard or mouse(F1/1/2/3/Q/E/R/F/C/Space/Shift/Tab/Caps/Click/Middle Button), the action key backlit turns to Red. Setting finished and press action key Red backlit lighting. Cancel Turbo key, hold and press Turbo and press action key again, the Red backlit turns to White then Turbo canceled. CONNECTION Connect to PS4/PS4 Silm/PS4 Pro a. Power on PS4 console and insert dongle into console. b. Plug PS4 original controller into 2.4G dongle port by cable. c. Plug mouse into keyboard. d. Turns on keyboard(First time connection press FN+ESC). e. And then 2.4G dongle LED turns to Blue and connected. Connect to PS3 a. Power on PS3 console. b. Insert 2.4G dongle into PS3 console. c. Plug mouse into keyboard. d. Turns on keyboard(First time connection press FN+3). e. And then 2.4G dongle LED turns to Yellow and connected. Notice : Please ensure that the original controller USB cable in use is the Charging and Data Sync Cable. The USB cable which only has a charging function is not supported with this device. PS:
L2 Connect to Xbox Series X|S/Xbox One|S|X Console a. Power on Xbox console and insert dongle into console. b. Plug Xbox original controller into 2.4G dongle port by cable. c. Plug mouse into keyboard. d. Turns on keyboard(First time connection press FN+ESC). e. And then 2.4G dongle LED turns to Green and connected. Connect to Switch Console a. Power on Switch and put it into the dock. b. Insert 2.4G dongle into dock. c. Plug mouse into keyboard. d. Turns on keyboard(First time connection press FN+ESC). e. And then 2.4G dongle LED turns to Red and connected. Keymap:
FCC Caution:
This device complies with part 15 of the FCC Rules.Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference receivedincluding interference that maycause undesired operation. Any Changes or modifications not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and if notinstalled and used in accordance with the instructions, may cause harmful interferenceto radio communications.However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmful interference toradio or television reception,which can be deter mined by turning the equipment offand on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different fiom that to which thereceiver is connected. Consult the dealer or an ex perienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The devicecan be used in portable ex posure condition without restriction.