User Manual Model: TG Series Read the user manual when setting up using and maitaining your robot, Intelligence Making Better Life Thank you far purchasing the TG series robot vacuum cleaner, we hape that you will enjay it. Ifyou have any questions when using it, please feel free to contact our after sales service at service@tecgroup.cn, our support team will help you For more information, please visit aur website at http:thww.tecgroup.cn/en, Due to the continuous impravernent of products, this user manual is subject to the actual product, and TEC Group reserves the right to update the product Table of Contents 1, Package Contents 14 Packing List 4.2 Robot Anatorry 2. Product Operating 24 Precautions. 23 Charging. 2.4 Download the APP and WEFi settings, 28 Start Cleaning, 2.6 Main Brush&Suction Inet 2.7 Water Tank Operation. 3. Regular Maintenance 4, Troubleshooting 5. Technical Spectfications. uM 13 16 16 7 19 21 Important Safety Instructions:
Before using this product, please read the following safety instructions and follow all normal safety precautions, This device can not be used by children aged from 8years and abave and persons with reduced physical, sensory or mental capabilities or lack of experience and hnawledge f they have been given supervision or instruction concerning use of this device in a safe way and understand the hazards involved 4, Children should he supervised ta ensure they do not play with this device, 2. Cleaning and maintenance shall nat be performed by children wthout adult supervision 3, This device is only to be used with the power supply unit provided. 4. For the purposes of recharging the battery, only use the detachable power supply Unt provided with this device, 5, The battery must be rermved from this device before this device is disposed of, To remove the battery from this device, first remove the screws on the battorn, then remore the main PCB and unscrew the battery cover using a screwdriver. Retrave the battery hy disconnecting the quick connector. 6, The used battery should he placed in a sealed plastic hay and disposed of safely according to local environmental regulations 7. The external flexible cable or cord of the power supply unit cannot be replaced; ifthe card is damaged, the power supply unit shall be disposed ct. 8, This device is for indoor use ony. 8, This device is nat a toy. Do not sit or stand on this device. Small children and pets shouldbe supervised when this device is operatina, 10. Store and operate this device in room temperature environments only, 11. Clean with a clath dampened with water only 12. Donot use this device to pick up arything that is burning or smoking, 13. Dont use this device to pick up spills of bleach, paint, chemicals, or anything wet 14, Before using this device, pick up objects ike clathing and loase paper. Lift up cords for blinds or curtains, and mave power cords and fragile abjects out of the way. If this device passes aver a power cord and drags, an object could be pulled afta table or shett 16. ifthe roam ta be cleaned has a balcory, a physical barrier should be used to prevent access tothe balcory andto ensure safe operation 16, Be aware that this device moves around on its awn, Take care when walking in the area where this device is operating to avoid stepping an it. 17. Dont operate this device in areas with exposed electrical outlets an the floor. 3 A\Warning :
1. Only certfied technicians may disassemble the product. Users are not allowed to disassemble or repair the product 2. Only use the AC adapter provided by the factory. Using other AC adapters may cause electric shack, fre or praduct damage. 3. Do not touch the power card, plug or adapter when your hands are wet 4, Keep loose clothing and fingers away from being drawn into the product's wheels 5. Keep the robot vacuum away from allflammables. 6. Never clean the robat while its on the charging dack or plugged in directly, Unplug the robot and turn off power switch when cleaning. 7. Keep the AC power cord tucked awey from becarring damaged in any way. 8. This product isto be used only indoors. Not intended for outdoor use. 8._Do not sit on top of the product or attach an abject on the top of it 10. Donot use this product inwet or rmist environments, 11. Before use, remove all the objects that could get caught in the brushes or suction passage, 12, Donot place this product on furniture or platforms where it can fall and be darraged 13, Turn the power switch off when not in use for a long period of time or when transporting the unit. 14. To avaid battery damage please check whether adapter and outlet are property connected. 16. To avoid any tripping hazards or injuries please inform all the people in the house when this product is in use Packing list QO &
The robot (including a dustbin) Charging dack i Water tank (option) Map i Adapter Cleaning brush About the Robot Bottom View Top view Bumper Auto Recharge Remote contral
(including 2AAA battery) rx Side brush"
eo Virtual boundary magnetic stripe (option) User manual SS High-performance filter & sponge Filter can Dustin button Charging dock Charging indicator Adanter Water tank Sponge Water inet Filter wter tank release button Remote Control Power Button Suction level Control Sensor atea @_ byreitoncentol [7B y StatiPause Charging contact pais Sot Cleaning ~ Edge Cleaning Water Control 5
=> |_ Auto Recharge Product Using / Note oo% y Ir IHR oN Please place the furniture property before using the robot and Femovethe other things Ie the wires and toys on the foot Pleasestep away tiom the doonvay of ale in order to let the robotwork etcenty, o/b Please place the furniture property before using the robot and remove the other things Ike the wites and toys on the floc. Please do not take the robot by one hand, in ease ofthe fling when press the mater tank release button Ifthe robot comes close ta the edge of the stairs, ar the small space among the furniture, please place the fence in order to runs smoothly.
~ _ Please do not use the mop on the carpet floor, ifthere is carpet tassels, draw it ta the bottom of the carpet Product Using / Charging Put the charging dock against the wall in a flat floor Mount the side brushes and connect itto the adapter Turn onthe power Charging 1.1 Charging: Place the charging dock against the wall, make sure there is 2 meters free space in frant ofthe dack meter free space on the right and lett 4.2. Connect the charging dock to the adapter. 2. Mount the side brush: press the side brush tothe slot, you will hear a cick sound, that means the installation is completed. 3, Turn on the power button: switch i on fram the bottom of the robot( 1 ison, 0 is"ofh) 4, Charging: put the rabot on the charging dack station, make sure the charging contact points connect well, when you hear "beep" it means start charging, During the cleaning pracess, when the rohat battery gets low, it will return to the charging dock station automatically 40 Youcanjua pressthe on the robot or remate contra, itwill return to the charging dock station, Add the robot in the APP and connect to Wi-Fi 1, Download the "Techot" APP fromthe IOS APP stoe or Android Google Play 2! Goto the "Tecbot'APP andcreate your court 3. Ht the" Robot icon onthe lef-bottom corner te add the robot, sean the QR code onthe side ofthe robot 4. WiFi settings Press and hold the @ button for 5 seconds you wil hear beep", that means the robat ison the connection mode, the @ button hlinks qucky, flow the APP instructions hifthe above setting felleg, select the compatible trade 5. Follwthe APP instructions set the Wi
~ After the setting corrleted, you can conta the robot through the APP Techot
~ By using the APP Tecbot, you can select the cleaning mode, scheduling, setig the cleaning time fare, monitoring the system, receiving the message and more 6. Youcan connect the Amazon Alexa or Google sistant by following the APP instruction, App Download and Network control In order ta make good use ofthe rae, we suggest that cn oo you use the APP to control the robot. =
Before eta, please conti a
+ Your smartphone or tablet connected ta the Wi Tecbot La
+108 80 or later mao!
Android 4,4 or later
+ Support 2.46 WiFi WI-FI inicator blinks quickly, }
The robot is charging on the charaing dock or r.) the battery isin a high level S=EEs =
+ Search" Tecbot on 0S App Store CPs Android oF Google Play Store. If connection failed, check the following:
Limake sure the router is networking. Diagram: Add the robot in the APP and connect to Wi-Fi make sure the WEFi password correct only support 246 WEF a7 42 Product Using / Start Cleaning Edge Cleaning Application Scenario The robot has multiple cleaning modes, you can change the mode through the robot, remote control, or APP. The robot runs on the edge of walls into @
i comers, after the edge cleaning completed, Auto cleaning hail returns ta the charging dock station Application scenaria : Smart S shape cleaning route Settings >
Setting: on a standby mode, press the @ button on the robot or @ button on the remote control, Press the button on the remote control, it will start Auto cleaning mode. it will start the edge cleaning.
Spot Cleaning Application Scenaria The robot runs on the edge of walls into corners, after the edge cleaning completed, it will returns ta the charging dock station, >
Settings Press button on the remote control, it will start spat cleaning Warm Prompt: when you use the robot clean only a single room, please clase the door and make sure it only runs in this room, if there is no charging dack station in the room, it will returns ta the place where it starts is Product Using / Main brush & inlet
@ Disassembly method:
+ push the main brush release button on both sides and take out the main brush caver.
+ Liftup the main brush from the left side and take it out.
+ Use the cloth ta clean the dust inlet
@ Application scenario
+ The main brush applied for the floors that has more debris, or carpet.
* Suction inlet is more suitable for the pet hair. is Using Water tank Warm Prompt: da nat use the mop when the robot work on the carpet, when the rabot cleaning the hatdkwaod floor, nlease pay the attention to the water level in the tank, fil the water intime, whenyout ty to add the water, please remove the water tank from the robot. When charging, rernave the water tank and replace itwith the dustbin,
+ Inorderto extending the Ifetire, we suggest you to usethe pure water or softened water.
* Please do nat use the rrop on the carpet floor.
= When youtty to add the water or clean the ran during he cleaning process, please keep the robot stay in arange of less 1 meter radius.
+ After finish mopping the floor, please empty the water tank and remove the rap. 1.Stick the mop on the bottom of the water tank, open the plug, inject the water slowly, close the plug. 6 Regular Maintenance Warm Prorrpt: Please turn aff the power when you The sponge filter and filter net can be washed, but the lean the robot and ts accessories high efficiency fiteris not washable Ocustbin O Filter Tips: please clean the fiters once a week, usually change a new fiter 1-2 months 4 aa, Remove the high eficierey fer, sponge fiter Remove the dustbin * and high efficiency fiter SZ 56 Open the cap af the dustbin 39 Use the cleaning brush to clean them Put the filter net, sponge fiter and high Seo efficiency fiter back to the dustbin, and clase the dustbin cag 5, Empty the dustbin ar Clean the rain brush & side brush @ Clean the caster wheel & sensors ice Cleanthe main brush use the cleaning tool Seo Clean the caster whee! with the cleaning brush se Remove the side brush, use the clath to clean t see Clean the dust on the seneors, make sure it works properly a Troubleshooting 19 working and fiers blocked Setar Nanter | __Malfanction Likely cause What to do Nemver| _Malfanction Likely cause What to do The bate nthe remole contol eed [Replace the naw bares and make Fre Robathas not made a comedionwlh [Be sure ta rbots charging oontace have epee | Renae te no bares abst etn the chaiging dock made 3 comectonvith he charging dock pins 4 | Rebotwitnat ohare en The rbot e powered offortherobots [Make sure he bat powered ON and Charging dock & unpligged wie the | PUG Te charging Jock and ensure Remete contottaure | pater nt uly oharoed robot is powered ON, which causes | Tebot & pameres reep the robot on the (ettective control range battery careump ton charaing dos to make sure ithar a full fective contol'ang |The niared signal canna Wansmited use ay ath or mlttunoton clearing tol battery to work at any time. at ten) f= control 5 because the infrared emitter on the remote |to wipe the infrared emitter on the remote meters) Gentiolortherobots infared receiver [een and he mare racewer onthe rob
[he robot coud nat | The charging doa may placed @ " Robat Chavo 2 [returns to the charging dock | wrong position. Please refer tothe" Robot Chargi 5s dirty The robots tmaledwihzomeing on | Tha botany vasous ways to get oer There is ather equipment intereing with | Avoid using he remote contol nea ther the floorelectical cords, drooping oud of touble, Hk failed, manually remove the inftared signal to the robot. equipment using infrared signa. caine, carpet tinge ee Sheu anes 3 __| The robot ges inte trouble pet tings ef) the obstacles and restart Use the remote contol under the Avoid the strong light when using the
| te worng stiong ah temete conta cise tne ne stat ortherotaton pend) Remove fhe debris angled around the side ofthe side brush decreases. brush, i the side brush still rotates slowly, Nowater leaking after | No water inthe water tanke Add the water in the water tank. contacthe vicbomer servioe 7 [the mop eta, Thewateroute onthe abet bot | Cleaning thewaleroutel or thewater hen batery power gets fom therabot Theva Clearing sutomaticay stones tun har mods an rate the Thi e normal ne soln neces ay The wboteleaning The rbetretums tothe charging doa to recharge tee route regular and | Something on the tor he the electioal | Remove the electiol cords and other hating dock beore # g|mesedsome ates | ods sipper sundries Deore startthe cleaning ob finghes te deanna. | woking time vais accondngto he | nocont eaing. APP shone fortype. room compet is normal, no solution necessary ivegular ute The robot coverthe fe missed area |Whan he robotwokina, ples do nak The oboteieans tne | 20m ier dont move Rarboo he Remote controltaitre _| The fobotis powered of. Power ON the robot 9. _ | somearea repeatedty way aici)
| (etfective control range of and missed other area. | Dyeto the various suroundings in a Place the robot tothe position where remote conkol meter) house, the obat detection angle varet, | started Tine scheduling & canceled Settine scheduling The robot generates: jide brush, main brush tangled, dustbin. lean and maintain the side brush, main jo. | sfonoteenersts | sige onsh, mainbrsh tng Clean and maintain the side brush, brush, dustbin an fier 20 Products Parameters models: TG Series Charging Dock TEC400 working Votage Rated Power |g | Rated nput Votage loo, gRateu ouput Curent] oct o Ww) a) Ww) A) Grariro tee |, [Runtire Ona Rated Outpt Votan] 4 | Rated input Power ing 4 [Binge Charge tain [10] ay 9 [tw Remote Conta Rated np Votage pera Tectose in Batten Type Chargable Lion Battery Pack 2600mAh Due to the continuous impravernent of products, this user manual is subject to the actual product, and TEC Group reserves the right to update the product. 2b FCC Waring This device complies with part 15 of the FCC rules. Operation is subject ta the following two conditians:
(1) this device may nat cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, ifnot installed and used in accordance with the instructions, may cause harmful interference ta radio communications. However, there is no guarantee that interference will nat accurin a parlicular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and an, the user is encouraged ta try to correct the interference by one ar more of the following measures:
-Reorient or relocate the receiving antenna
+Increase the separation between the equipment and recelver. Connect the equipment into an outlet on a circuit different fram that ta which the receiver is connected.
*Consult the dealer or an experienced radia/TV technician for help Radiation Exposure Statement This equipment camplies with FCC radiation exposure limits set forth for an uncontrolled environment, This equipment should be installed and operated with minimum distance 20cm between the radiatar and your body 2