Use r's m anual of tecbot robot vaccum
Please read this manual car e fully be fore usi ng th e
product and keep it properl y
Th ank s for choosing our pro d uct
The product is a cleaning robot integrated with sweeping, vaccum and mopping.
With laser real-time construction of cleaning map and self planning of sweeping
path, it can complete a full coverage cleaning.The machine has a variety of
perception functions and super obstacle ability, easily adapt to the complex
home environment.With an implementation of regular, efficient cleaning work, the
product can be carried out at the same time for sweeping and mopping, also you
can choose sweeping or mopping function separately.It has super suction force
of more than 4000Pa. The bionic wet mopping system can realize self-cleaning of
the roller by using the function of strong water spray and water squeezing. With
a timely recover of the sewage, the roller can be reused without dismantling and
cleaningIt can recharge automatically
Practical technology makes you get rid of trivial housework and enjoy life.
Wish you a happy life with our product.
Pr o du c t introduction
Device
Start / pause
WiFi signal light
Automatic recharge
Type-C socket
(connect to computer for upgrading)
Laser pick up
Direct charging
1
Prod uct introduction
Accessories list
Mopping roller
Side brush *2
Recharging station
O
T
U
A
Remote control
2
Power adapter (optional)
Power adapter (optional)
Pr odu ct introduction
Wat er tank handle
Water inlet
Fl ap
Outlet of sewage tank
Water inlet of
cleaning water pump
Sewage tank buckle
water tank
Dust bin handle
Dust bin
Dust bin buckle
Dust bin cover
Dust bin
Dust bin filter element
3
Device
Se wa ge ta nk
Pro duc t introduction
Device and sensor
Front sensor
Front receiver
Impact buffer
Edge sensor
Left receiver
right receiver
Rear left receiver
Right rear receiver
4
Pr odu ct introduction
Device and s enso r
Ground sensor
Charging electrode
Side brush
Along wall sensor
Right ground sensor
Mopping roller
Roller buckle
5
Universal wheel
Middle brush
Middle brush
cover buckle
Left ground sensor
Main wheel
power switch
Sewage tank
Prod uct introduction
Recharging station
Front
indicator light
Signal transmitting area
Charging shrapnel
Back
Power interface
6
Prod uct introduction
Remote control
AUTO
Standby: press the button, the device is in standby mode
AUTO
Automatic: press this button, the device starts
sweeping and mopping
Automatic recharging: press this button, the device
will start to search for the recharging station automatically
Forward: press and release this button, the device will
move forward and stop when encountering obstacles
Backward: press this button, the device goes backward,
release the button, the device stops
Right: press this button to turn the device to the right
until it is released, then it goes straight and stops
when encountering obstacles
Left: press this button to turn the device to the left
until it is released, then it goes straight and stops
when encountering obstacles
sweep: press this button to start the function of sweeping
Fixed point sweep: press this button to start local cleaning
in the selected area
Wet mopping: press this button, the device starts to mop the floor
powerful wet mopping: press this button, the device starts
powerful wet mopping function
Fixed point wet mopping: press this button, the device
starts to do local wet mopping in the selected area
Wash mop: press this button, the device stops working
and starts cleaning roller mop
7
Product operations/ cautions
Please clean the wire and sundries scattered on the ground. And
remove the articles that are easy to fall, fragile, valuable and etc
away before starting.To avoid being entangled, stuck, dragged or
knocked down by the device, and causing personal or property damage.
If you use this product in a suspended environment, be sure to use a
solid physical barrier to prevent the divice from causing personal or
property damage due to accidental fall.
8
App Download
1. Scan the QR code below to download
the "tecbot" application.
TECBOT
2. Download "tecbot" Application in Apple
IOS application market or domestic Baidu,
Huawei and other Android application
markets or in browser.
App download and
network control
In order to use the full functions of the robot,
we recommend to use app to control it.
Before starting, please confirm:
Your mobilephone or tablet is connected to the
·
Wi-Fi network.
The system of your mobilephone or tablet is IOS 8.0
·
(or above) or Android 4.4 (or above)
The router supports 2.4GHz wireless signal.
·
The WiFi signal is flashing.
·
Scan the QR code to download the latest version of
·
app or search for "tecbot" in the app store.
App Downloads options
tecbot
TecbotHome
Chinese version
international version
Android
9
Install
Installation instructions
To add the device and set the connection and WiFi on APP
Step 1: regist account number
Step 2: click to Add device
Step 3: connect power
No device
Add device
Land
Regist
Step 4: start the robot, press the
home button for 3-5 seconds, and
the WiFi signal light starts to flash.
Home page
Intelligence
Mine
Step 5: make sure the
indicator light is flashing
Step 6: if the connection is
successful, the WiFi signal
light will stop flashing.
Cancel
WIFI
Cancel
WIFI
Complete
Reset device
Reset device
Cancel
WIFI
Reset device
Turn on the device and waiting for 10
seconds, and then turn on the power
after the breakpoint
Last step
next step
Added successfully
Robot
Add device successfully
keep pressing the reset
button for 5 seconds
Make sure the light flashing
Last step
next step
Last step
next step
10
installation
1. After taking the unit out of the packaging box,
please remove the protective foam on both sides
of the host.
Protective foam
3. Install the side brush. Protective foam
Protective foam
2. Please check the installation of the sewage
tank, middle brush and dust bin is loose or not.
If so, please reinstall
4. Install the mopping roller.
11
install
Recharging s tati on
De vi ce ch argi ng
Place the recharging station on the
horizontal ground close to the wall and
connect the power supply.
When the power of the device is less than 15%, it will
automatically find the recharge station to charge. You
can also directly press the remote control recharge
button to start the automatic recharge function.
During the charging process, the mopping roller will
automatically lift to keep the ground clean.
Over 0.6m
Over 0.6m
Over 1.6m
Note: (1) Please ensure that there is over 0.6m
space on both sides of the recharge station and
over 1.6m space in front of it
(2) The power cord should be perpendicular to
the ground to prevent it from being dragged by
the device, to avoid the recharge station to move
or power off.
Note: when the power is not enough, you
can't start the machine. Please put the
device on the recharge station manually. The
indicator light on the recharge station
flashes, indicating that the charging has
started. It takes about five hours for the
battery to be fully charged.
12
inst ruc tions
Water tank filling
Open the flap to take out the water tank and open the
rubber plug and put the water into the tank, then plug
the rubber plug tightly when the tank is full. Put it
back to the device, and close the flap.
Power on / off
The power switch is on the right side of the bottom.
(as shown in the figure above)
Press "1" for power on, press "0" for power off. After
power on, the device needs about 10 seconds for self
checking. After self checking, the device starts normally.
(1) Please check whether the water tank needs to be
added water or the sewage tank needs to be dumped
before starting the device.
(2) One of the five working modes, which are automatic,
sweeping, wet mopping, fixed point sweeping, and fixed
point wet mopping, can be selected as the current
working mode.
Note: this device has the function of setting up map
and planning path, which can automatically return the
charging station.
Water inlet
rubber plug
Water inlet
Battery
The device uses a high-performance lithium-ion
rechargeable battery pack. In order to maintain
the battery performance, please keep the device
charged for daily use.
Note: if not used for more than 24 hours, please
turn off the power switch of the device.
13
in s tr u ctions
Cleaning path
1. After starting, you can choose one
of the five cleaning modes (automatic,
sweeping, wet mopping, fixed point
sweeping, and fixed point wet
mopping). After pressing the function
button, the device will start to go
straight and select the right side to do
edge cleaning, when it meets a wall or
a large obstacle. And it will do S path
cleaning, when it meets a wall or a
large obstacle on the other side.
During the working time, it will
intelligently avoid the obstacles and
automatically plan the path to clean
the remaining space.
2. If the automatic or wet mopping
function is selected, the device will
automatically clean the mopping roller
every 10 minutes.
14
ins tru ctions
Cleaning method
The mopping roller descends and
starts to mop the floor
The mopping roller rises and
leaves the ground
1.If the automatic function is selected, the
device will automatically start the "sweeping,
suction and mopping" functions. The device
will automatically clean one side of the
environment, and then clean the other side.
2. sweeping: after selecting the "sweeping"
function, the device will automatically turn on
the function of suction and sweeping, and the
mopping roller will rise up. The device will
automatically clean one side of the
environment, and then clean the other side.
3. wet mopping: after selecting the "wet
mopping" function, the device will
automatically turn on the function of mopping
the ground. The side brush, middle brush, fan
and so on all stop working, and the mopping
roller starts to mop the ground when it drops.
Note: If the automatic or wet mopping function is selected, the device will automatically spray water, clean the mopping
roller, and recycle the sewage. When the sewage tank is full, please clean the sewage tank in time.
The mopping roller descends and
starts to mop the floor
15
in s tr u ctions
Cleaning method
4. Fixed point sweeping
Press the standby button of the remote
control, select the required direction
button, control the device to the required
cleaning area, then press the fixed-point
sweeping key, the device starts to clean in
the area of 1.5m x 1.5m, After cleaning,
the device will return to the original
location.
5. Fixed point wet mopping
Press the standby button of the remote
control, select the required direction
button, and the control the device to the
area to be cleaned, then press the fixed
point wet mopping button. The device
starts wet mopping in the 1.5m x1.5m
area. After mopping, the device will return
to the original location.
1.5M
1.5M
M
5
.
1
M
5
.
1
16
Ro uti ne maintenance
Middle brush cover
Middle brush cover
buckle
Middle brush
Middle brush
*Cleaning is recommended at least once a week
Use the matching cleaning brush to clean
the entanglement on the middle brush. After
cleaning, replace the brush and press the
buckle of the cover.
Turn over the machine, push the clips on
both sides to the middle, take down the
middle brush cover, and then take out the
middle brush.
Brush cleaning tool used in cleaning method
Middle brush
Cleaning Brush
17
Rout ine maintenance
Side brush
*It is recommended to clean up once a month
1. Turn over the device and remove the
screw of side brush.
2. Remove and clean the side brush
3. Fasten the screw.
Note: it is recommended to replace the
side brush about half a year
Screw
Ground inspection window
*It is recommended to clean up once a month
Turn over the device, wipe and clean the
inspection window with cotton swab, and
keep the inspection window clean.
Ground sensor
Right ground sensor
Left ground sensor
18
Rout ine maintenance
Universal wheel
*It is recommended to clean at least once a week
Clean the hair and dirt on the wheel body or axle
Rech arge st at io n
*It is recommended to clean the recharge station
once a month
Use a soft cloth to wipe the charging spring and
lens on the charging base
Host sensor
*It is recommended to clean up once a month
Use a soft cloth to clean all sensors of the host,
including the charging electrode
Charging electrode
Dust bin
*It is recommended to clean at least once a week
(1) Open the flip, turn the handle 90 °
and take out the dust bin upward.
handle
(2) Open the dust bin cover from the buckle and
pour the garbage down.
Along wall sensor
Buckle
Left ground sensor
19
Rout ine maintenance
Cleaning dust bin assembly
*It is recommended to clean up once a month
(1) Pull out the back cover assembly from the
dust bin, then take out the HEPA and sponge
from the back cover.
back cover
HEPA
Sponge
back cover
Note: please clean with water, do not add any detergent.
Sponge
Filter net
Dust bin
(2) Clean the dust bin, sponge, HEPA and
back cover with clean water.
(3) The dust bin, sponge, HEPA and back cover
shall be dried thoroughly before reusing.
Note: please do not use it until dry
enough (at least 24 hours)
Filter net
Dust bin
Sponge
Note: please do not clean the filter net with brush or finger.
20
Ro u ti n e maintenance
Sewage tank
*It is recommended to clean it once per using
(1) Press down the buckle and take out
the sewage tank.
Rubber plug A
Rubber plug B
Note: the rubber plug A is a movable rubber
plug, which can be taken down gently.
Sewage tank
Buckle
21
(2) Open the rubber plug and
pour out the sewage.
(4) When the sewage tank had been
used for many times, please remove the
movable rubber plug to clean the water
inlet of the water tank.
Note: it is recommended to clean once every three months
(3) Clean the sewage tank with clean
water and clean the dirt with provided
brush.
Note: after the sewage tank is cleaned, please dry the surface with a paper towel and install it back to the
device. After hearing the "click" sound, it means that it has been installed in right place.
22
Ro uti ne maintenance
Mopping roller
(1) Take out the sewage tank first
(2) Turn over the device, gently push upward to
open the buckle and take out the roller.
Buckle
mopping roller
(3) Please clean the roller with clean water.
(4) Dry or wring by hand.
Note: it is recommended to replace the roller in about 6 months
23
Ba sic parameters
Device
name
Overall dimension
product weight
Suction power
Battery
Noise
Wo r ki ng t im e
Du st b in c apa c it y
Clean water tank capacity
Sewage tank capacity
Ob st a cle h eig h t
Ra te d po we r
Parameters
350x350x108mm
about4.5kg
4000Pa
14.4V/5200mAh
<65dB
120-150 minutes
500ml
400ml
300ml
15mm
36W
recharge station
name
Parameters
Overall dimension
216x107x132mm
Ra te d i np ut
Ra te d outp ut
100-240V 1A
19V 1A
24
Name and content of harmful substances in products
lead
( Pb)
mercury
chromium
( Hg)
(Cd)
Hexavalent
chromium
( C r ( V I ) )
polybrominated
biphenyls
( PBB)
polybrominated
diphenyl ethers
( PBDE)
Harmful substances
Part name
Circuit board
Metal parts
cabinet
Battery
Other parts
This table is compiled according to SJ / t11364
It indicates that the content of the hazardous substance in all homogeneous materials of the component is
below the limit specified in SJ / t11364.
It indicates that the content of the hazardous substance in at least one homogeneous material of the
component exceeds the limit specified in SJ / t11364.
common problem
problem
Unable to power on
resolvent
The battery is low. Please charge it by the charging station before using it.
The ambient temperature can not be too low (below 0 ° C) or too high
(above 50 ° C), please use it at 0-40 ° C.
Unable to charge
If the charging base is not powered on, please make sure that both ends of
the power line of the charging base are plugged in; if the contact is poor,
please clean the spring piece of the charging base and the charging contact
piece of the host; please make sure that the charging indicator light is on.
25
common problem
probl em
res olve nt
There are too many obstacles near the charging base. Please put the
charging station in an clear area;The device is too far away from the recharge
Unable to recharge
station, please put the device near the recharge station to try;Please confirm
whether the recharging station remains powered on;Please clean the sensor
of recharge station in time.
Abnormal noise during cleaning
stop the machine and clean it.
The middle brush, side brush or left and right wheel may be entangled. Please
The cleaning capacity is
reduced or dust fall occurs
The performance of mopping
is not good enough
Appointment cleaning
does not work
If the dust bin is full, please clean the dust bin; if the filter net is jammed,
please clean the filter. If the middle brush is wrapped, please clean the middle
brush.
Check the water tank, please add water to the tank in time.
If the remain power is less than 20%, the
device will not start as appointment.
Charging on the charging station all
The device, which keep charging on the recharging station, will have low
the time will consume electricity or not
electrode consumption, and keep the battery in the best performance.
Does the first three times using
The lithium battery has no memory record when it is used or charged. Full
require 16 hours of charging
is enough. It doesn't need to wait for 16 hours charging.
After starting the automatic function,
the device automatically switches to
sweep only.
Unable to return to recharge station
after partial cleaning or moving
position
Wipe the surface of sewage tank with paper towel and install it well, then
restart the automatic function.
After partial cleaning or long-distance moving, the sweeper will regenerate the
map. If the charging station is too far away, it may not be able to recharge
automatically, please manually put the device back to the charging station to
recharge.
26
common problem
problem
resolvent
Abnormal behavior
restart after Power off
During cleaning, the
device will fall off step
Please clean the ground sensor
Unable to avoid obstacles
Please clean the along wall and the front sensors
security information
Battery and charging
1. Please do not use any third-party batteries, chargers or recharging station.
2. Please do not disassemble, repair or refit the battery and recharging station without permission.
3.Please do not place the recharging station close to a hot source (such as heater).
4. Plaese do not wipe and clean the cartridge of the recharging station with wet cloth or wet hands.
5. Please send the expired battery to professional recycling agency for treatment.
6. If the power cord is broken, please stop using it and contact customer service at once.
7. If you need to transport the product, please make sure that the device is power off. It is recommended to use the original
packaging box.
8. If you will not use this product for a long time, please power off the device after full charged. And place it in a cool and dry
place. Please charge it at least once every 3 months to avoid damage the battery.
27
security information
Restrictions on use
1. This product is only used for infloor cleaning at home, but not for outdoor (such as open balcony),
non floor (such as sofa, bed), commercial or industrial environment.
2. Please do not use in the hanging environment (such as duplex floor, open balcony, top of
furniture) without protective fence.
3. Please do not use it in the environment of higher than 40 ° C, or lower than 0° C or any sticky
ground.
4. Please hang up the ground cable at home to avoid dragging the cable when the device is
running.
5. Please put away the fragile articles and sundries (such as flower bottles, plastic bags, etc.) to
avoid any damage when the device is running.
6. Please do not let people with physical, mental or sensory impairment (including children) use this
product.
7. Please do not let children use the device as a toy. When working, please monitor children and
pets to keep them away as far as possible.
8. Please do not place the cleaning brush in the area that children can reach.
9. Please do not place any objects (including children and pets) on the top of a running device.
10. Please do not let the hair, fingers and other parts of human body or pet close to the suction port
of the device when it is working.
11. Please do not use it to clean any burning objects (such as a burning cigarette ends).
12. Please do not use it to clean long wool carpet (some dark carpet may not work as well).
13. Please do not let the device absorb hard or sharp objects (such as decoration waste, glass,
nails, etc.)
14. Please do not use the cover of the device or the collision buffer as the handle to carry the
machine.
15. Please do not clean the device or the recharging station when power on.
16. Please do not use wet cloth or any liquid to wipe any part of the product.
17. Please do not use the mopping mode on carpet.
18. Please use the product in strict accordance with the instructions. Any loss and injury caused by
improper use shall be borne by the user.
28
Executive Standards: GB4706.1-2005,GB4706.7-2014,GB4343.1-2009,GB17625.1-2012
tecbot robot vaccum
Manufacturer: Shenzhen tanbo intelligent robot Co., Ltd
Address: Rm. 8CDE, Nanyuan Fengye building, 1088 Nanshan Avenue, Dengliang community,
Nanshan District, Shenzhen,China
Manufacturer: Guangdong Jingrong Technology Holding Co., Ltd
Address: Jingrong Industrial Park, Shunfeng Road, Sanzhong village, Qingxi Town, Dongguan City,
Guangdong Province, China
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
inte rference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interferenceto radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.