FCC ID: V7TCP6 Security Pan/Tilt Camera 2K

 

Package contents Appearance LED indicator Add the camera to TDSEE App Tips:

Before adding your camera, please ensure that the router is connected the internet successfully and the filter function is disabled. Download the TDSEE onto your mobile device by searching for TDSEE in the App Store or Google Play or by scanning the QR code. Quick Installation Guide Security Pan/Tilt Camera 2K CP6 Camera x 1 Power adapter x 1 Base x 1 This guide is applicable to the Ethernet port version and non-Ethernet port version of Security Pan/

Tilt Camera 2K. The Ethernet port version is used for illustration unless otherwise specified. Reset button Hold down the Reset button for about 5 seconds and release it when the LED indicator blinks blue quickly or you hear a prompt tone. The camera is reset successfully. For product or function details, please go to www.tendacn.com to download the user guide. Quick installation guide x 1 Micro SD card slot Turn the lens upward, then you can see it.

(Height: 6.6 mm, Inner diameter:2.4 mm,

(BA3 x 25 mm, Head diameter:6.0 mm) Screw x 2 Installation template x 1 Anchor x 2 Length:26.4 mm) Quick Installation Guide Security Pan/Tilt Camera 2K CP6 This guide is applicable to the Ethernet port version and non-Ethernet port version of Security Pan/Tilt Camera 2K. The Ethernet port version is used for illustration unless otherwise specified. LED indicator Solid red: Initializing and starting. Blinking red slowly: Disconnected from a 2.4 GHz Wi-Fi network. Blinking red quickly: Connecting to a 2.4 GHz Wi-Fi network. Solid blue: Connected to a 2.4 GHz Wi-Fi network. Blinking blue slowly: Upgrading. Blinking blue quickly: Waiting to connect to a 2.4 GHz Wi-Fi network. Ethernet port 10/100Mbps auto-negotiation Ethernet port, used for connecting the router, switch, etc. Or QR code Internet Router Run the TDSEE App and follow the instructions to complete user registration. Enter the Home page, tap the Add a device or the upper right corner of the home page . Scan the QR code on the bottom of the camera, and follow the instructions in the App. LAN PWR Micro SD card slot Reset button Micro SD Reset Ethernet port Microphone LAN PWR Speaker Power port Power on the camera. The LED indicator lights solid red after the camera is powered on. When the LED indicator blinks blue quickly, it indicates the camera is waiting to connect to a 2.4 GHz Wi-Fi network. Install the device The camera supports desktop, ceiling and wall installations. This guide takes ceiling installation as an example. Tips:

Please make sure the ceiling is strong enough to withstand three times the weight of the camera and base. You may need a hammer drill, a drill bit, a screwdriver, and a ladder for the installation. Please prepare them by yourself. Drill bit diameter: 6 mm Hole depth: 28-32 mm Buckle Slot Ceiling Installation template Anchor Base Screw After finishing the ceiling installation, in order to facilitate monitoring, you need to adjust the camera installation status. Methods: Run the TDSEE App. Choose the camera on the home page, and tap Settings in the upper right corner

> Video Flip-over, choose Camera UP-side Down. FAQ Q1. What should I do when I failed to add the camera?

A1. Try the following solutions:

Ensure that the router is connected to the internet successfully. The Security Pan/Tilt Camera 2K only supports 2.4 GHz Wi-Fi network. When adding the Security Pan/Tilt Camera 2K, you need to connect the smartphone to a 2.4 GHz Wi-Fi network. Do not hide the Wi-Fi network of the router when adding the Security Pan/Tilt Camera 2K (After adding the Wi-Fi network successfully, you can hide the Wi-Fi network). Confirm whether the LED indicator of the camera blinks blue quickly. If not, please reset the camera configure it again. and Reset method: Hold down the Reset button for about 5 seconds and release it when the LED indicator blinks blue quickly or you hear a prompt tone. The Security Pan/Tilt Camera 2K is reset successfully. Q2. What should I do when the video preview is not smooth?

A2. Try the following solutions:

Check if the Wi-Fi network of the router is smooth. Move the router closer to the camera. When previewing the video with cellular data, make sure that the internet connection of the smartphone is smooth. Auto, Fluent, and HD are supported for video preview. By default, it is Auto. You can adjust the video clarity according to the internet status. Q3. How to store the video?

A3. Try the following solutions:

Method 1: Install the Micro SD card to the camera. By default, the camera's recording mode is Alarm Recording, which can be set to All-day Recording through TDSEE App. Method: Run TDSEE App, choose the Security Pan/Tilt Camera 2K on the home page, then tap Settings( in the upper right corner) Recording Settings, choose All-day Recording. Method 2: Subscribe Cloud Storage Service on TDSEE App. Method: Run TDSEE App, choose the camera on the home page, and then tap Cloud Storage in the lower left corner. You can enjoy free cloud storage service (7-days loop detection recording) for 3 months upon the first activation. CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. This equipment should be installed and operated with minimum distance 20cm between the device and your body. The mains plug is used as disconnect device, the disconnect device shall remain readily operable. NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable. Declaration of Conformity Hereby, SHENZHEN TENDA TECHNOLOGY CO., LTD. declares that the radio equipment type CP6 is in compliance with Directive 2014/53/EU. Hereby, SHENZHEN TENDA TECHNOLOGY CO., LTD. declares that the radio equipment type CP3 is in compliance with Directive 2014/53/EU The full text of the EU declaration of conformity is available at the following internet address:

http://www.tendacn.com/en/service/download-cata-101.html Operating Frequency:

2.4 GHz: US/2412-2462MHz(CH1-CH11),2422-2452MHz(CH3-CH9) Conducted Power (Max):

2.4 GHz: 15.74dBm Software Version: V1.0.X Caution:

Adapter Model: BN073-A09009U Manufacture: SHENZHEN HEWEISHUN NETWORK TECHNOLOGY CO., LTD. Input: 100-240V AC, 50/60Hz 0.4A Output: 9V DC, 1A

: DC Voltage FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment should be installed and operated with minimum distance 20cm between the device and your body. Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operating frequency: 2412-2462MHz NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable. RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys new electrical or electronic equipment. Operating Temperature: 0C - 40C Operating Humidity: (10% - 95%) RH, non-condensing Technical Support Shenzhen Tenda Technology Co., Ltd. 6-8 Floor, Tower E3, NO.1001, Zhongshanyuan Road, Nanshan District, Shenzhen, China. 518052 USA hotline: 1-800-570-5892 Toll Free: 7 x 24 hours Canada hotline: 1-888-998-8966 Toll Free: Mon - Fri 9 am - 6 pm PST Hong Kong hotline: 00852-81931998 Global hotline: +86 755-2765 7180 (China Time Zone) Website: www.tendacn.com E-mail: support@tenda.com.cn Copyright 2020 Shenzhen Tenda Technology Co., Ltd. All rights reserved. Tenda is a registered trademark legally held by Shenzhen Tenda Technology Co., Ltd. Other brand and product names mentioned herein are trademarks or registered trademarks of their respective holders. Specifications are subject to change without notice.

 

 

 

 

 

 

 

 

 

 

FCC PART 15.247 TEST REPORT For 518052 FCC ID: V7TCP6 SHENZHEN TENDA TECHNOLOGY CO.,LTD. 6-8 Floor, Tower E3, No. 1001, Zhongshanyuan Road, Nanshan District, Shenzhen, China. Report Type:

Product Name:

Original Report Security Pan/Tilt Camera 2K Report Number:

RDG200910010-00 Report Date: 2020-10-19 Reviewed By:

Test Laboratory:

Ivan Cao Assistant Manager Bay Area Compliance Laboratories Corp. (Dongguan) No.69 Pulongcun, Puxinhu Industry Area, Tangxia, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4 OBJECTIVE ................................................................................................................................................................... 4 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 4 TEST METHODOLOGY .................................................................................................................................................. 4 MEASUREMENT UNCERTAINTY .................................................................................................................................... 5 TEST FACILITY ............................................................................................................................................................. 5 DECLARATIONS ............................................................................................................................................................ 5 SYSTEM TEST CONFIGURATION .......................................................................................................................... 6 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 6 EUT EXERCISE SOFTWARE .......................................................................................................................................... 6 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 9 LOCAL SUPPORT EQUIPMENT LIST AND DETAILS ........................................................................................................ 9 SUPPORT CABLE LIST AND DETAILS ............................................................................................................................ 9 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 9 SUMMARY OF TEST RESULTS ............................................................................................................................. 10 FCC 15.247 (i) & 1.1310 & 2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE) ....................................... 11 APPLICABLE STANDARD ............................................................................................................................................ 11 FCC 15.203 - ANTENNA REQUIREMENT ........................................................................................................... 12 APPLICABLE STANDARD ............................................................................................................................................ 12 ANTENNA CONNECTOR CONSTRUCTION .................................................................................................................... 12 FCC 15.207 (a) AC LINE CONDUCTED EMISSIONS ..................................................................................... 13 APPLICABLE STANDARD ............................................................................................................................................ 13 EUT SETUP ................................................................................................................................................................ 13 EMI TEST RECEIVER SETUP ....................................................................................................................................... 13 TEST PROCEDURE ...................................................................................................................................................... 14 CORRECTED AMPLITUDE & MARGIN CALCULATION ................................................................................................. 14 TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 14 TEST DATA ................................................................................................................................................................ 15 FCC 15.209, 15.205 & 15.247(d) - SPURIOUS EMISSIONS ............................................................................. 17 APPLICABLE STANDARD ............................................................................................................................................ 17 EUT SETUP ................................................................................................................................................................ 17 EMI TEST RECEIVER & SPECTRUM ANALYZER SETUP .............................................................................................. 18 TEST PROCEDURE ...................................................................................................................................................... 18 CORRECTED AMPLITUDE & MARGIN CALCULATION ................................................................................................. 18 TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 19 TEST DATA ................................................................................................................................................................ 19 FCC 15.247(a) (2)6 dB EMISSION BANDWIDTH .............................................................................................. 28 APPLICABLE STANDARD ............................................................................................................................................ 28 TEST PROCEDURE ...................................................................................................................................................... 28 TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 28 TEST DATA ................................................................................................................................................................ 28 FCC 15.247(b) (3) - MAXIMUM PEAK CONDUCTED OUTPUT POWER ...................................................... 36 APPLICABLE STANDARD ............................................................................................................................................ 36 TEST PROCEDURE ...................................................................................................................................................... 36 Page 2 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 36 TEST DATA ................................................................................................................................................................ 36 FCC 15.247(d) 100 kHz BANDWIDTH OF FREQUENCY BAND EDGE ........................................................ 38 APPLICABLE STANDARD ............................................................................................................................................ 38 TEST PROCEDURE ...................................................................................................................................................... 38 TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 38 TEST DATA ................................................................................................................................................................ 38 FCC 15.247(e) - POWER SPECTRAL DENSITY ................................................................................................. 43 APPLICABLE STANDARD ............................................................................................................................................ 43 TEST PROCEDURE ...................................................................................................................................................... 43 TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 43 TEST DATA ................................................................................................................................................................ 43 Page 3 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 GENERAL INFORMATION Product Description for Equipment under Test (EUT) Operation Frequency: 2412-2462 MHz(802.11b/g/n ht20), 2422-2452 MHz(802.11n ht40) EUT Name: Security Pan/Tilt Camera 2K EUT Model: CP6 Multiple Model: CP7,CP5 Maximum Peak Output Power

(Conducted):

15.74 dBm(802.11b/g/n) Modulation Type: DSSS, OFDM(802.11b/g/n) Antenna Gain: 5 dBi Rated Input Voltage: DC 9V from Adapter Adapter Information Model: BN073-A09009U Input: 100-240V~50/60Hz 0.4 A Output: 9.0V -1.0A 9.0W Serial Number: RDG200910013-RF-S1 EUT Received Date: 2020.09.10 EUT Received Status: Good Note: The series product, models CP6, CP7,CP5 are electrically identical, The difference between them please refer to the declaration letter for details. CP6 was full tested. Objective This report is prepared on behalf of SHENZHEN TENDA TECHNOLOGY CO.,LTD. in accordance with Part 2, Subpart J, Part 15, Subparts A and C of the Federal Communications Commissions rules. The tests were performed in order to determine the compliance of the EUT with FCC Rules Part 15-

Subpart C, section 15.203, 15.205, 15.207, 15.209 and 15.247 rules. Related Submittal(s)/Grant(s) No related submittal. Test Methodology All measurements contained in this report were conducted with ANSI C63.10-2013, American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices. And 558074 D01 15.247 Meas Guidance v05r02. All emissions measurement was performed and Bay Area Compliance Laboratories Corp. (Dongguan). Page 4 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 Measurement Uncertainty Measurement Uncertainty Parameter Occupied Channel Bandwidth RF output power, conducted Power Spectral Density, conducted Unwanted Emissions, radiated Unwanted Emissions, conducted DC and low frequency voltages Temperature Humidity Duty Cycle 5 %

0.61dB 0.61 dB 1.5 dB 1 5%

0.4%

1%

30M~200MHz: 4.55 dB,200M~1GHz: 5.92 dB,1G~6GHz: 4.98 dB, 6G~18GHz: 5.89 dB,18G~26.5G:5.47 dB,26.5G~40G:5.63 dB AC Power Lines Conducted Emission 3.12 dB (150 kHz to 30 MHz) Note: Otherwise required by the applicant or Product Regulations, Decision Rule in this report did not consider the uncertainty. The extended uncertainty given in this report is obtained by combining the standard uncertainty times the coverage factor K with the 95% confidence interval. Test Facility The Test site used by Bay Area Compliance Laboratories Corp. (Dongguan) to collect test data is located on the No.69 Pulongcun, Puxinhu Industry Area, Tangxia, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 897218, the FCC Designation No. :

CN1220. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0022. Declarations BACL is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol . Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk . Page 5 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 SYSTEM TEST CONFIGURATION Description of Test Configuration The system was configured for testing in Engineering Mode, which was provided by the manufacturer. For 2.4GHz band, total 11 channels are provided:

Channel Frequency Channel Frequency 1 2 3 4 5 6

(MHz) 2412 2417 2422 2427 2432 2437 7 8 9 10 11

(MHz) 2442 2447 2452 2457 2462

For 802.11b, 802.11g, and 802.11n ht20 modes were test with channel 1, 6, 11. For 802.11n ht40 modes were test with channel 3, 6, 9. The worst-case data rates are determined to be as follows for each mode based upon investigations by measuring the average power and PSD across all data rates bandwidths, and modulations. EUT Exercise Software The software MP_TEST was used for testing, which was provided by manufacturer. The maximum power was configured as below table, that provided by the manufacturer:

Mode Channel Data rate Power level Setting Frequency 802.11b 802.11g 802.11n ht20 802.11n ht40 Low Middle High Low Middle High Low Middle High Low Middle High

(MHz) 2412 2437 2462 2412 2437 2462 2412 2437 2462 2422 2437 2452 Test mode The maximum duty cycle as following table:

Ton

(ms) 100 2.152 1.952 0.976 802.11n ht20 802.11n ht40 802.11b 802.11g 1Mbps 1Mbps 1Mbps 6Mbps 6Mbps 6Mbps MCS0 MCS0 MCS0 MCS0 MCS0 MCS0 Ton+off

(ms) 100 2.356 2.176 1.200 46 46 46 46 46 46 46 46 46 46 46 46 Duty Cycle

(%) 100.00 91.34 89.71 81.33 Page 6 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 802.11b

RBW 10 MHz VBW 10 MHz SWT 100 ms Marker 1 [T1 ]

11.06 dBm 68.300000 ms 1 Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB 1 PK

CLRWR 10 0

-10

-20

-30

-40

-50

-60

-70

-80

-10

-20

-30

-40

-50

-60

-70

-80 Center 2.437 GHz 10 ms/

Date: 30.SEP.2020 00:51:30 Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB 1 PK

CLRWR 10 0 802.11g

RBW 10 MHz VBW 10 MHz SWT 10 ms Delta 2 [T1 ]

1.56 dB 2.356000 ms Marker 1 [T1 ]

-48.06 dBm 3.308000 ms Delta 1 [T1 ]

0.24 dB 2.152000 ms A SGL LVL 1 2 1 Center 2.437 GHz 1 ms/

Date: 29.SEP.2020 23:52:52 A SGL LVL 3DB 3DB Page 7 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB 1 PK

CLRWR 10 0 802.11n ht20

RBW 10 MHz VBW 10 MHz SWT 8 ms Marker 1 [T1 ]

-47.33 dBm 2.868000 ms Delta 2 [T1 ]

-0.76 dB 2.176000 ms Delta 1 [T1 ]

0.03 dB 1.952000 ms A SGL LVL 1 1 2 Center 2.437 GHz 800 s/

Date: 29.SEP.2020 23:51:59 Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB 1 PK

CLRWR 10 0 802.11n ht40

RBW 10 MHz VBW 10 MHz SWT 4 ms Delta 2 [T1 ]

2.04 dB 1.200000 ms Marker 1 [T1 ]

-48.64 dBm 1.140000 ms Delta 1 [T1 ]

0.49 dB 976.000000 s A SGL LVL

-10

-20

-30

-40

-50

-60

-70

-80

-10

-20

-30

-40

-50

-60

-70

-80 3DB 3DB 1 2 1 Center 2.437 GHz 400 s/

Date: 29.SEP.2020 23:50:44 Page 8 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 Equipment Modifications No modification was made to the EUT. Local Support Equipment List and Details Serial Number 4G-1 QDS-BRCM1017 Cable Description Shielding Type Ferrite Core RJ45 Cable DC Cable Yes Yes No No From Port To EUT Adapter Laptop EUT Manufacturer Description Kinston DELL SD Card Laptop Support Cable List and Details Block Diagram of Test Setup Model 4G PP11L Length

(m) 10 0.8 Page 9 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 SUMMARY OF TEST RESULTS FCC Rules Description of Test Result FCC 15.247 (i) & 1.1310 &

Maximum Permissible Exposure (MPE) Compliance 2.1091 15.203 15.205, 15.209, 15.247(d) 15.247 (a)(2) 15.207 (a) AC Line Conducted Emissions Antenna Requirement Spurious Emissions 6 dB Bandwidth Compliance Compliance Compliance Compliance Compliance 15.247(b)(3) Maximum Conducted Output Power 15.247(d) 15.247(e) 100 kHz Bandwidth of Frequency Band Edge Compliance Power Spectral Density Compliance Page 10 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 FCC 15.247 (i) & 1.1310 & 2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE) Applicable Standard According to subpart 15.247(i)and subpart 1.1310, systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commissions guidelines. Limits for Maximum Permissible Exposure (MPE) (1.1310, 2.1091)

(B) Limits for General Population/Uncontrolled Exposure Power Density Electric Field Strength (V/m) Magnetic Field Strength (A/m) Averaging Time

(minutes) Frequency Range

(MHz) 0.31.34 1.3430 30300 3001500 1500100,000 614 824/f 27.5

1.63 2.19/f 0.073

(mW/cm2)

*(100)

*(180/f) 0.2 f/1500 1.0 30 30 30 30 30 f = frequency in MHz; * = Plane-wave equivalent power density;

According to 1.1310 and 2.1091 RF exposure is calculated. Calculation formula:

Prediction of power density at the distance of the applicable MPE limit S = PG/4R = power density (in appropriate units, e.g. mW/cm2);

P = power input to the antenna (in appropriate units, e.g., mW);

G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain;

R = distance to the center of radiation of the antenna (appropriate units, e.g., cm);

Calculated Data:

Mode Frequency

(MHz) Antenna Gain

(dBi)

(numeric) Conducted output power including Tune-

up Tolerance

(mW) 39.81

(dBm) 16 Evaluation Distance

(cm) Power Density

(mW/cm2) MPE Limit

(mW/cm2) WLAN 2412-2462 5 3.16 20.00 0.025 1.0 Result: The device meet FCC MPE at 20 cm distance Page 11 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 FCC 15.203 - ANTENNA REQUIREMENT Applicable Standard According to 15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. The manufacturer may design the unit so that a broken antenna can be replaced by the user, but the user of a standard antenna jack or electrical connector is prohibited. The structure and application of the EUT were analyzed to determine compliance with section 15.203 of the rules. 15.203 state that the subject device must meet the following criteria:

a. Antenna must be permanently attached to the unit. b. Antenna must use a unique type of connector to attach to the EUT. c. Unit must be professionally installed, and installer shall be responsible for verifying that the correct antenna is employed with the unit. Antenna Connector Construction The EUT has one internal antenna permanently attached to the unit, fulfill the requirement of this section. Please refer to the EUT photos and below information:

Antenna Type PCB input impedance

(Ohm) 50 Antenna Gain

/Frequency Range 5 dBi/2.4-2.5GHz Result: Compliance. Page 12 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 FCC 15.207 (a) AC LINE CONDUCTED EMISSIONS Applicable Standard FCC15.207(a). EUT Setup The setup of EUT is according with per ANSI C63.10-2013 measurement procedure. The specification used was with the FCC Part 15.207 limits. The spacing between the peripherals was 10 cm. The adapter was connected to the main LISN with a 120 V/60 Hz AC power source. EMI Test Receiver Setup The EMI test receiver was set to investigate the spectrum from 150 kHz to 30 MHz. During the conducted emission test, the EMI test receiver was set with the following configurations:

Frequency Range 150 kHz 30 MHz IF B/W 9 kHz Page 13 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 Test Procedure During the conducted emission test, the adapter was connected to the first LISN. The frequency and amplitude of the six highest ac power-line conducted emissions relative to the limit, measured over all the current-carrying conductors of the EUT power cords, and the operating frequency or frequency to which the EUT is tuned (if appropriate), should be reported, unless such emissions are more than 20 dB below the limit. AC power-line conducted emissions measurements are to be separately carried out only on each of the phase (hot) line(s) and (if used) on the neutral line(s), but not on the ground [protective earth] line(s). If less than six emission frequencies are within 20 dB of the limit, then the noise level of the measuring instrument at representative frequencies should be reported. The specific conductor of the power-line cord for each of the reported emissions should be identified. Measure the six highest emissions with respect to the limit on each current-carrying conductor of each power cord associated with the EUT (but not the power cords of associated or peripheral equipment that are part of the test configuration). Then, report the six highest emissions with respect to the limit from among all the measurements identifying the frequency and specific current-carrying conductor identified with the emission. The six highest emissions should be reported for each of the current-carrying conductors, or the six highest emissions may be reported over all the current-carrying conductors. Corrected Amplitude & Margin Calculation The basic equation is as follows:

VC = VR + AC + VDF Cf = AC + VDF Herein, VC (cord. Reading): corrected voltage amplitude VR: reading voltage amplitude Ac: attenuation caused by cable loss VDF: voltage division factor of AMN Cf: Correction Factor The Margin column of the following data tables indicates the degree of compliance within the applicable limit. For example, a margin of 7dB means the emission is 7dB below the limit. The equation for margin calculation is as follows:

Margin = Limit Corrected Amplitude Test Equipment List and Details Manufacturer Description Model LISN ENV 216 EMI Test Receiver ESCI MICRO-COAX Coaxial Cable C-NJNJ-50 C-0200-01 Calibration Date 2020-09-12 2020-07-07 2020-09-05 Calibration Due Date 2021-09-12 2021-07-07 2021-09-05 Test Software EMC32 N/A N/A Serial Number 101614 101121 Version 9.10.00

* Statement of Traceability: Bay Area Compliance Laboratories Corp. (Dongguan) attests that all calibrations have been performed, traceable to National Primary Standards and International System of Units (SI). R&S R&S R&S Page 14 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 Test Data Environmental Conditions Temperature:

Relative Humidity:

ATM Pressure:

Tester:

Test Date:

25.2 60 %

100.7kPa Leo Long 2020-09-27 Test Mode: Transmitting(802.11b mode middle channel was the worst) AC120 V, 60 Hz, Line:

Class B Voltage on Mains QP Class B Voltage on Mains AV B d n i l e v e L 80 70 60 50 40 30 20 10 0 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz Final_Result Frequency QuasiPeak

(dBV)

(MHz) 0.494060 0.494060 1.548133 1.579328 1.727673 2.413169 2.679631 3.005345 3.596438 4.094399 4.176904 4.779012 Average

(dBV) 35.80

30.34

30.00

30.35

31.34 30.66 Limit

(dBV) 46.10 56.10 46.00 56.00 56.00 46.00 56.00 46.00 56.00 56.00 46.00 46.00 Margin

(dB) 10.30 12.27 15.66 19.31 19.06 16.00 18.56 15.65 17.66 18.90 14.66 15.34

43.83

36.69 36.94

37.44

38.34 37.10

Bandwidth Line

(kHz) 9.000 9.000 9.000 9.000 9.000 9.000 9.000 9.000 9.000 9.000 9.000 9.000 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 Corr.

(dB) 9.6 9.6 9.7 9.7 9.7 9.7 9.7 9.7 9.7 9.7 9.7 9.7 Page 15 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 AC120 V, 60 Hz, Neutral:

Class B Voltage on Mains QP Class B Voltage on Mains AV B d n i l e v e L 80 70 60 50 40 30 20 10 0 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz Final_Result Frequency QuasiPeak

(MHz)

(dBV) Average

(dBV) Limit

(dBV) Margin

(dB) Bandwidth Line

(kHz) Corr.

(dB) 0.194414 0.247000 0.277024 0.334832 0.388874 0.402691 0.481892 0.496531 0.499013 0.504016 0.588291 3.353882

24.12 32.81 29.06 29.62

37.90 29.37 31.52

25.66 24.96 30.03 33.08 30.47

53.85 61.86 60.90 59.33 48.09 47.80 46.31 46.06 56.02 46.00 56.00 56.00 29.73 29.05 31.84 29.71 22.43 21.84 16.28 12.98 18.12 16.53 26.63 24.48 9.000 N 9.000 N 9.000 N 9.000 N 9.000 N 9.000 N 9.000 N 9.000 N 9.000 N 9.000 N 9.000 N 9.000 N 9.6 9.6 9.6 9.6 9.6 9.6 9.6 9.6 9.6 9.6 9.6 9.6 Page 16 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 FCC 15.209, 15.205 & 15.247(d) - SPURIOUS EMISSIONS Applicable Standard FCC 15.247 (d); 15.209; 15.205;

EUT Setup Below 1GHz:

Above 1GHz:

The radiated emission below 1GHz tests were performed in the 10 meters chamber test site, above 1GHz tests were performed in the 3 meters chamber test site B, using the setup accordance with the ANSI C63.10-2013. The specification used was the FCC 15.209, and FCC 15.247 limits. The external I/O cables were draped along the test table and formed a bundle 30 to 40 cm long in the middle. The spacing between the peripherals was 10 cm. Page 17 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 EMI Test Receiver & Spectrum Analyzer Setup The system was investigated from 30 MHz to 25 GHz. During the radiated emission test, the EMI test receiver & Spectrum Analyzer Setup were set with the following configurations:

30MHz-1000MHz:

Measurement QP RBW 120 kHz Video B/W 300 kHz IF B/W 120kHz 1GHz- 25GHz:

Measurement Duty cycle PK AV Any

>98%

<98%

RBW 1MHz 1MHz 1MHz Video B/W 3 MHz 10 Hz 1/T Note: T is minimum transmission duration If the maximized peak measured value complies with under the QP/Average limit more than 6dB, then it is unnecessary to perform an QP/Average measurement. Test Procedure Maximizing procedure was performed on the highest emissions to ensure that the EUT complied with all installation combinations. Data was recorded in Quasi-peak detection mode for frequency range of 30 MHz-1 GHz, peak and Average detection modes for frequencies above 1 GHz. Corrected Amplitude & Margin Calculation The Corrected Amplitude is calculated by adding the Antenna Factor and Cable Loss, and subtracting the Amplifier Gain from the Meter Reading. The basic equation is as follows:

Corrected Amplitude = Meter Reading + Antenna Factor + Cable Loss - Amplifier Gain The Margin column of the following data tables indicates the degree of compliance with the applicable limit. For example, a margin of 7dB means the emission is 7dB below the limit. The equation for margin calculation is as follows:

Margin = Limit Corrected Amplitude Page 18 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 Test Equipment List and Details Manufacturer Description Model Radiation Below 1GHz Sunol Sciences Antenna R&S Unknown Unknown Unknown Sonoma Farad EMI Test Receiver Coaxial Cable Coaxial Cable Coaxial Cable Amplifier Test Software JB3 ESCI C-NJNJ-50 C-NJNJ-50 C-NJNJ-50 310N EZ-EMC Radiation Above 1GHz Horn Antenna 3115 Horn Antenna ARH-4223-02 Serial Number Calibration Date Calibration Due Date A060611-2 100224 C-1000-01 C-0400-02 C-0530-01 185914 V1.1.4.2 000 527 35 1007726-01 1304 2020-08-25 2020-09-12 2020-09-05 2020-09-05 2020-09-24 2020-10-13 N/A 2023-08-25 2021-09-12 2021-09-05 2021-09-05 2021-09-24 2021-10-13 N/A 2018-10-12 2021-10-12 2017-12-06 2020-12-05 Spectrum Analyzer Coaxial Cable Coaxial Cable Amplifier Amplifier E4440A C-SJSJ-50 SG43360054 C-0800-01 C-0700-02 54201245 QLW-18405536-JO 15964001001 C-2.4J2.4J-50 ZVA-213-S+

2020-07-07 2020-09-05 2020-06-27 2020-09-05 2020-06-27 Test Software EZ-EMC V1.1.4.2 N/A 2021-07-07 2021-09-05 2021-06-27 2021-09-05 2021-06-27 N/A ETS-Lindgren Ducommun Technolagies Agilent Unknown Unknown Mini-Circuit Quinstar Farad E-Microwave Band-stop Filters OE01601525 2020-06-16 2021-06-16 OBSF-2400-2483.5-

S Micro-tronics High Pass Filter HPM50111 S/N-G217 2020-06-16 2021-06-16

* Statement of Traceability: Bay Area Compliance Laboratories Corp. (Dongguan) attests that all calibrations have been performed, traceable to National Primary Standards and International System of Units (SI). Test Data Environmental Conditions Test Items Radiation Below 1GHz Radiation Above 1GHz Temperature:

Relative Humidity:

ATM Pressure:

Tester:

Test Date:

26.9C 33 %

100.4kPa Michael Zhang 2020-09-18 27.0 oC 39 %

100.5kPa Jalon Liu 2020-09-28 Test Result: Compliance, please Refer to the following data Test Mode: Transmitting Page 19 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 1) 30MHz-1GHz(802.11b Middle channel was the worst) Horizontal:

Frequency

(MHz) 30.9700 85.2900 106.6300 125.0600 131.8500 250.1900 Receiver Reading

(dBuV) 27.00 40.94 37.39 40.21 37.70 44.10 Detector peak peak peak peak peak peak Correction Factor

(dB/m) Cord. Amp.

(dBuV/m) 0.74

-11.60

-7.27

-4.81

-5.07

-5.99 27.74 29.34 30.12 35.40 32.63 38.11 Limit

(dBuV/m) Margin

(dB) 40.00 40.00 43.50 43.50 43.50 46.00 12.26 10.66 13.38 8.10 10.87 7.89 Page 20 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 Vertical:

Frequency

(MHz) Receiver Reading

(dBuV) Detector Correction Factor

(dB/m) Cord. Amp.

(dBuV/m) Limit

(dBuV/m) Margin

(dB) 30.9700 39.7000 46.4900 52.3100 125.0600 250.1900 30.60 40.72 42.80 42.11 39.70 42.93 QP QP QP QP peak peak 31.34 34.88 32.69 30.06 34.89 36.94 40.00 40.00 40.00 40.00 43.50 46.00 8.66 5.12 7.31 9.94 8.61 9.06 0.74

-5.84

-10.11

-12.05

-4.81

-5.99 Page 21 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 2) 1-25GHz:

802.11b Mode:

Frequency

(MHz) Receiver Reading

(dBV) Detector Rx Antenna Factor

(dB/m) Polar

(H/V) Cable loss

(dB) Amplifier Gain

(dB) Corrected Amplitude

(dBV/m) Limit

(dBV/m) Margin

(dB) Low Channel: 2412 MHz 2412.00 2412.00 2412.00 2412.00 2390.00 2390.00 4824.00 4824.00 7236.00 7236.00 2437.00 2437.00 2437.00 2437.00 4874.00 4874.00 7311.00 7311.00 2462.00 2462.00 2462.00 2462.00 2483.50 2483.50 4924.00 4924.00 7386.00 7386.00 70.19 67.23 75.78 72.06 26.56 14.06 38.64 31.65 36.78 24.56 69.68 65.52 75.23 71.44 40.32 33.78 36.04 23.67 69.64 65.33 74.57 70.72 26.90 14.27 41.05 36.11 36.08 23.85 PK AV PK AV PK AV PK AV PK AV PK AV PK AV PK AV PK AV PK AV PK AV PK AV PK AV PK AV Middle Channel: 2437 MHz H H V V V V V V V V H H V V V V V V H H V V V V V V V V 28.12 28.12 28.12 28.12 28.08 28.08 32.95 32.95 35.81 35.81 28.17 28.17 28.17 28.17 33.05 33.05 36.01 36.01 28.22 28.22 28.22 28.22 28.27 28.27 33.15 33.15 36.20 36.20 1.81 1.81 1.81 1.81 1.80 1.80 3.19 3.19 4.77 4.77 1.82 1.82 1.82 1.82 3.26 3.26 4.64 4.64 1.83 1.83 1.83 1.83 1.84 1.84 3.27 3.27 4.51 4.51 High Channel: 2462 MHz 0.00 0.00 0.00 0.00 0.00 0.00 25.62 25.62 25.64 25.64 0.00 0.00 0.00 0.00 25.65 25.65 25.71 25.71 0.00 0.00 0.00 0.00 0.00 0.00 25.65 25.65 25.79 25.79 100.12 97.16 105.71 101.99 56.44 43.94 49.16 42.17 51.72 39.50 99.67 95.51 105.22 101.43 50.98 44.44 50.98 38.61 99.69 95.38 104.62 100.77 57.01 44.38 51.82 46.88 51.00 38.77 N/A N/A N/A N/A 74.00 54.00 74.00 54.00 74.00 54.00 N/A N/A N/A N/A 74.00 54.00 74.00 54.00 N/A N/A N/A N/A 74.00 54.00 74.00 54.00 74.00 54.00 N/A N/A N/A N/A 17.56 10.06 24.84 11.83 22.28 14.50 N/A N/A N/A N/A 23.02 9.56 23.02 15.39 N/A N/A N/A N/A 16.99 9.62 22.18 7.12 23.00 15.23 Page 22 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 802.11g Mode:

Frequency

(MHz) Receiver Reading

(dBV) Detector Rx Antenna Factor

(dB/m) Polar

(H/V) Cable loss

(dB) Amplifier Gain

(dB) Corrected Amplitude

(dBV/m) Limit

(dBV/m) Margin

(dB) Low Channel: 2412 MHz 2412.00 2412.00 2412.00 2412.00 2390.00 2390.00 4824.00 4824.00 7236.00 7236.00 2437.00 2437.00 2437.00 2437.00 4874.00 4874.00 7311.00 7311.00 2462.00 2462.00 2462.00 2462.00 2483.50 2483.50 4924.00 4924.00 7386.00 7386.00 68.62 59.41 71.18 62.29 26.09 14.23 36.81 24.55 35.64 23.52 70.26 67.12 73.44 63.39 37.17 25.08 36.38 24.19 70.65 61.32 73.75 64.75 31.66 15.59 39.44 28.33 36.04 23.58 PK AV PK AV PK AV PK AV PK AV PK AV PK AV PK AV PK AV PK AV PK AV PK AV PK AV PK AV Middle Channel: 2437 MHz H H V V V V V V V V H H V V V V V V H H V V V V V V V V 28.12 28.12 28.12 28.12 28.08 28.08 32.95 32.95 35.81 35.81 28.17 28.17 28.17 28.17 33.05 33.05 36.01 36.01 28.22 28.22 28.22 28.22 28.27 28.27 33.15 33.15 36.20 36.20 1.81 1.81 1.81 1.81 1.80 1.80 3.19 3.19 4.77 4.77 1.82 1.82 1.82 1.82 3.26 3.26 4.64 4.64 1.83 1.83 1.83 1.83 1.84 1.84 3.27 3.27 4.51 4.51 High Channel: 2462 MHz 0.00 0.00 0.00 0.00 0.00 0.00 25.62 25.62 25.64 25.64 0.00 0.00 0.00 0.00 25.65 25.65 25.71 25.71 0.00 0.00 0.00 0.00 0.00 0.00 25.65 25.65 25.79 25.79 98.55 89.34 101.11 92.22 55.97 44.11 47.33 35.07 50.58 38.46 100.25 97.11 103.43 93.38 47.83 35.74 51.32 39.13 100.70 91.37 103.80 94.80 61.77 45.70 50.21 39.10 50.96 38.50 N/A N/A N/A N/A 74.00 54.00 74.00 54.00 74.00 54.00 N/A N/A N/A N/A 74.00 54.00 74.00 54.00 N/A N/A N/A N/A 74.00 54.00 74.00 54.00 74.00 54.00 N/A N/A N/A N/A 18.03 9.89 26.67 18.93 23.42 15.54 N/A N/A N/A N/A 26.17 18.26 22.68 14.87 N/A N/A N/A N/A 12.23 8.30 23.79 14.90 23.04 15.50 Page 23 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 802.11n ht20 Mode:

Frequency

(MHz) Receiver Reading

(dBV) Detector Rx Antenna Factor

(dB/m) Polar

(H/V) Cable loss

(dB) Amplifier Gain

(dB) Corrected Amplitude

(dBV/m) Limit

(dBV/m) Margin

(dB) Low Channel: 2412 MHz 2412.00 2412.00 2412.00 2412.00 2390.00 2390.00 4824.00 4824.00 7236.00 7236.00 2437.00 2437.00 2437.00 2437.00 4874.00 4874.00 7311.00 7311.00 2462.00 2462.00 2462.00 2462.00 2483.50 2483.50 4924.00 4924.00 7386.00 7386.00 71.35 62.38 72.13 63.05 29.74 14.27 37.16 25.22 36.34 24.39 72.63 64.37 73.75 65.22 36.42 24.33 35.93 23.78 71.87 62.58 72.10 63.74 30.85 15.97 36.38 24.19 36.05 24.01 PK AV PK AV PK AV PK AV PK AV PK AV PK AV PK AV PK AV PK AV PK AV PK AV PK AV PK AV Middle Channel: 2437 MHz H H V V V V V V V V H H V V V V V V H H V V V V V V V V 28.12 28.12 28.12 28.12 28.08 28.08 32.95 32.95 35.81 35.81 28.17 28.17 28.17 28.17 33.05 33.05 36.01 36.01 28.22 28.22 28.22 28.22 28.27 28.27 33.15 33.15 36.20 36.20 1.81 1.81 1.81 1.81 1.80 1.80 3.19 3.19 4.77 4.77 1.82 1.82 1.82 1.82 3.26 3.26 4.64 4.64 1.83 1.83 1.83 1.83 1.84 1.84 3.27 3.27 4.51 4.51 High Channel: 2462 MHz 0.00 0.00 0.00 0.00 0.00 0.00 25.62 25.62 25.64 25.64 0.00 0.00 0.00 0.00 25.65 25.65 25.71 25.71 0.00 0.00 0.00 0.00 0.00 0.00 25.65 25.65 25.79 25.79 101.28 92.31 102.06 92.98 59.62 44.15 47.68 35.74 51.28 39.33 102.62 94.36 103.74 95.21 47.08 34.99 50.87 38.72 101.92 92.63 102.15 93.79 60.96 46.08 47.15 34.96 50.97 38.93 N/A N/A N/A N/A 74.00 54.00 74.00 54.00 74.00 54.00 N/A N/A N/A N/A 74.00 54.00 74.00 54.00 N/A N/A N/A N/A 74.00 54.00 74.00 54.00 74.00 54.00 N/A N/A N/A N/A 14.38 9.85 26.32 18.26 22.72 14.67 N/A N/A N/A N/A 26.92 19.01 23.13 15.28 N/A N/A N/A N/A 13.04 7.92 26.85 19.04 23.03 15.07 Page 24 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 802.11n ht40 Mode:

Frequency

(MHz) Receiver Reading

(dBV) Detector Rx Antenna Factor

(dB/m) Polar

(H/V) Cable loss

(dB) Amplifier Gain

(dB) Corrected Amplitude

(dBV/m) Limit

(dBV/m) Margin

(dB) Low Channel: 2422 MHz 2422.00 2422.00 2422.00 2422.00 2390.00 2390.00 4844.00 4844.00 7266.00 7266.00 2437.00 2437.00 2437.00 2437.00 4874.00 4874.00 7311.00 7311.00 2452.00 2452.00 2452.00 2452.00 2483.50 2483.50 4904.00 4904.00 7356.00 7356.00 67.81 56.36 68.41 57.03 26.17 14.39 36.52 24.23 35.87 23.58 68.25 58.63 69.96 60.33 36.47 24.21 35.63 23.41 68.96 58.57 70.04 59.88 31.27 16.71 36.83 24.54 35.59 23.41 PK AV PK AV PK AV PK AV PK AV PK AV PK AV PK AV PK AV PK AV PK AV PK AV PK AV PK AV Middle Channel: 2437 MHz H H V V V V V V V V H H V V V V V V H H V V V V V V V V 28.14 28.14 28.14 28.14 28.08 28.08 32.99 32.99 35.89 35.89 28.17 28.17 28.17 28.17 33.05 33.05 36.01 36.01 28.20 28.20 28.20 28.20 28.27 28.27 33.11 33.11 36.13 36.13 1.81 1.81 1.81 1.81 1.80 1.80 3.22 3.22 4.72 4.72 1.82 1.82 1.82 1.82 3.26 3.26 4.64 4.64 1.83 1.83 1.83 1.83 1.84 1.84 3.30 3.30 4.56 4.56 High Channel: 2452 MHz 0.00 0.00 0.00 0.00 0.00 0.00 25.63 25.63 25.67 25.67 0.00 0.00 0.00 0.00 25.65 25.65 25.71 25.71 0.00 0.00 0.00 0.00 0.00 0.00 25.67 25.67 25.76 25.76 97.76 86.31 98.36 86.98 56.05 44.27 47.10 34.81 50.81 38.52 98.24 88.62 99.95 90.32 47.13 34.87 50.57 38.35 98.99 88.60 100.07 89.91 61.38 46.82 47.57 35.28 50.52 38.34 N/A N/A N/A N/A 74.00 54.00 74.00 54.00 74.00 54.00 N/A N/A N/A N/A 74.00 54.00 74.00 54.00 N/A N/A N/A N/A 74.00 54.00 74.00 54.00 74.00 54.00 N/A N/A N/A N/A 17.95 9.73 26.90 19.19 23.19 15.48 N/A N/A N/A N/A 26.87 19.13 23.43 15.65 N/A N/A N/A N/A 12.62 7.18 26.43 18.72 23.48 15.66 Page 25 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 Test plots(802.11b,High channel was the worst) Horizontal:

Fundamental Test with Band Rejection Filter Page 26 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 Vertical:

Fundamental Test with Band Rejection Filter Page 27 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 FCC 15.247(a) (2)6 dB EMISSION BANDWIDTH Applicable Standard According to FCC 15.247(a) (2) Systems using digital modulation techniques may operate in the 902928 MHz, 24002483.5 MHz, and 57255850 MHz bands. The minimum 6 dB bandwidth shall be at least 500 kHz. Test Procedure a) Set RBW = 100 kHz. b) Set the video bandwidth (VBW) 3RBW. c) Detector = Peak. d) Trace mode = max hold. e) Sweep = auto couple. f) Allow the trace to stabilize. g) Measure the maximum width of the emission that is constrained by the frequencies associated with the two outermost amplitude points (upper and lower frequencies) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission. Test Equipment Test Equipment List and Details EUT Manufacturer Description Model Serial Number Calibration Date Calibration Due Date R&S Spectrum Analyzer FSP 38 100478 2020-07-07 2021-07-07 Unknown Coaxial Cable C-SJ00-0010 C0010/03 Each time N/A

* Statement of Traceability: Bay Area Compliance Laboratories Corp. (Dongguan) attests that all calibrations have been performed, traceable to National Primary Standards and International System of Units (SI). Test Data Environmental Conditions Temperature:

Relative Humidity:

ATM Pressure:

Test by:

Test Date:

26.5 oC 45%

100.7 kPa Billy Li 2020-10-14 Page 28 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 Test Mode: Transmitting Test Result: Compliance. Please refer to the following table and plots. Test mode Channel Frequency

(MHz) 6 dB Emission Bandwidth Limit

(MHz) 802.11b 802.11g 802.11n ht20 802.11n ht40 Low Middle High Low Middle High Low Middle High Low Middle High 2412 2437 2462 2412 2437 2462 2412 2437 2462 2422 2437 2452

(MHz) 9.040 8.640 9.040 16.480 16.560 16.480 17.520 17.520 17.520 36.160 36.000 36.160 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 Page 29 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 6dB Emission Bandwidth:

802.11b Low Channel

RBW 100 kHz VBW 300 kHz SWT 5 ms Delta 1 [T1 ]

0.45 dB 9.040000000 MHz Marker 1 [T1 ]

-1.71 dBm 2.407520000 GHz Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB 1 PK MAXH D1 3.72 dBm D2 -2.28 dBm 1 1 10 0

-10

-20

-30

-40

-50

-60

-70

-80 10 0

-10

-20

-30

-40

-50

-60

-70

-80 Center 2.412 GHz 4 MHz/

Span 40 MHz Date: 29.SEP.2020 23:27:29 802.11b Middle Channel Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB 1 PK MAXH D1 4.97 dBm D2 -1.03 dBm 1 1

RBW 100 kHz VBW 300 kHz SWT 5 ms Delta 1 [T1 ]

-0.16 dB 8.640000000 MHz Marker 1 [T1 ]

-0.83 dBm 2.432920000 GHz A LVL 3DB A LVL 3DB Center 2.437 GHz 4 MHz/

Span 40 MHz Date: 29.SEP.2020 23:29:19 Page 30 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 802.11b High Channel Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB 1 PK MAXH D1 4.52 dBm D2 -1.48 dBm 1 1

RBW 100 kHz VBW 300 kHz SWT 5 ms Delta 1 [T1 ]

-0.38 dB 9.040000000 MHz Marker 1 [T1 ]

-0.91 dBm 2.457520000 GHz 10 0

-10

-20

-30

-40

-50

-60

-70

-80

-20

-30

-40

-50

-60

-70

-80 Center 2.462 GHz 4 MHz/

Span 40 MHz Date: 29.SEP.2020 23:30:20 Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB 802.11g Low Channel

RBW 100 kHz VBW 300 kHz SWT 5 ms Delta 1 [T1 ]

1.01 dB 16.480000000 MHz Marker 1 [T1 ]

-10.10 dBm 2.403760000 GHz 1 PK MAXH 10 0 D1 -3.98 dBm 1

-10 D2 -9.98 dBm 1 A LVL 3DB A LVL 3DB Center 2.412 GHz 4 MHz/

Span 40 MHz Date: 29.SEP.2020 23:33:13 Page 31 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 802.11g Middle Channel

RBW 100 kHz VBW 300 kHz SWT 5 ms Delta 1 [T1 ]

0.52 dB 16.560000000 MHz Marker 1 [T1 ]

-9.47 dBm 2.428760000 GHz Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB 1 PK MAXH D1 -2.47 dBm D2 -8.47 dBm 1 1 1 Center 2.437 GHz 4 MHz/

Span 40 MHz Date: 29.SEP.2020 23:34:51 Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB 1 PK MAXH D1 -3.3 dBm 1 D2 -9.3 dBm 802.11g High Channel

RBW 100 kHz VBW 300 kHz SWT 5 ms Delta 1 [T1 ]

0.92 dB 16.480000000 MHz Marker 1 [T1 ]

-9.78 dBm 2.453760000 GHz 10 0

-10

-20

-30

-40

-50

-60

-70

-80 10 0

-10

-20

-30

-40

-50

-60

-70

-80 A LVL 3DB A LVL 3DB Center 2.462 GHz 4 MHz/

Span 40 MHz Date: 29.SEP.2020 23:31:37 Page 32 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 802.11n ht20 Low Channel

RBW 100 kHz VBW 300 kHz SWT 5 ms Delta 1 [T1 ]

0.52 dB 17.520000000 MHz Marker 1 [T1 ]

-9.32 dBm 2.403280000 GHz Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB 1 PK MAXH D1 -3.81 dBm 1 D2 -9.81 dBm Center 2.412 GHz 4 MHz/

Span 40 MHz Date: 29.SEP.2020 23:36:26 802.11n ht20 Middle Channel

RBW 100 kHz VBW 300 kHz SWT 5 ms Delta 1 [T1 ]

0.52 dB 17.520000000 MHz Marker 1 [T1 ]

-7.89 dBm 2.428280000 GHz Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB 1 PK MAXH D1 -2.25 dBm 1 D2 -8.25 dBm 1 1 A LVL 3DB A LVL 3DB Center 2.437 GHz 4 MHz/

Span 40 MHz Date: 29.SEP.2020 23:38:22 Page 33 of 50 10 0

-10

-20

-30

-40

-50

-60

-70

-80 10 0

-10

-20

-30

-40

-50

-60

-70

-80 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB 802.11n ht20 High Channel

RBW 100 kHz VBW 300 kHz SWT 5 ms Delta 1 [T1 ]

0.74 dB 17.520000000 MHz Marker 1 [T1 ]

-7.94 dBm 2.453280000 GHz D1 -2.02 dBm D2 -8.02 dBm 1 1 1 PK MAXH 1 PK MAXH 10 0

-10

-20

-30

-40

-50

-60

-70

-80 10 0

-10

-20

-30

-40

-50

-60

-70

-80 Center 2.462 GHz 4 MHz/

Span 40 MHz Date: 29.SEP.2020 23:39:53 Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB 802.11n ht40 Low Channel

RBW 100 kHz VBW 300 kHz SWT 10 ms Delta 1 [T1 ]

1.21 dB 36.160000000 MHz Marker 1 [T1 ]

-10.98 dBm 2.404080000 GHz D1 -4.76 dBm D2 -10.76 dBm 1 1 A LVL 3DB A LVL 3DB Center 2.422 GHz 8 MHz/

Span 80 MHz Date: 29.SEP.2020 23:44:13 Page 34 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 802.11n ht40 Middle Channel

RBW 100 kHz VBW 300 kHz SWT 10 ms Delta 1 [T1 ]

0.20 dB 36.000000000 MHz Marker 1 [T1 ]

-10.00 dBm 2.419240000 GHz Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB 1 PK MAXH 10 0 D1 -4.02 dBm 1

-10 D2 -10.02 dBm Center 2.437 GHz 8 MHz/

Span 80 MHz Date: 29.SEP.2020 23:46:34 Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB 1 PK MAXH 10 0 D1 -4.28 dBm 1

-10 D2 -10.28 dBm 802.11n ht40 High Channel

RBW 100 kHz VBW 300 kHz SWT 10 ms Delta 1 [T1 ]

-0.11 dB 36.160000000 MHz Marker 1 [T1 ]

-10.52 dBm 2.433920000 GHz 1 1 A LVL 3DB A LVL 3DB

-20

-30

-40

-50

-60

-70

-80

-20

-30

-40

-50

-60

-70

-80 Center 2.452 GHz 8 MHz/

Span 80 MHz Date: 29.SEP.2020 23:41:55 Page 35 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 FCC 15.247(b) (3) - MAXIMUM PEAK CONDUCTED OUTPUT POWER Applicable Standard According to FCC 15.247(b) (3), for systems using digital modulation in the 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz bands: 1 Watt. As an alternative to a peak power measurement, compliance with the one Watt limit can be based on a measurement of the maximum conducted output power. Maximum Conducted Output Power is defined as the total transmit power delivered to all antennas and antenna elements averaged across all symbols in the signaling alphabet when the transmitter is operating at its maximum power control level. Power must be summed across all antennas and antenna elements. The average must not include any time intervals during which the transmitter is off or is transmitting at a reduced power level. If multiple modes of operation are possible (e.g., alternative modulation methods), the maximum conducted output power is the highest total transmit power occurring in any mode. Test Procedure 1. Place the EUT on a bench and set it in transmitting mode. 2. Remove the antenna from the EUT and then connect a low loss RF cable from the antenna port to test equipment. 3. Add a correction factor to the display. 4. Set the power meter to test average output power, record the result as average power. EUT Power Meter Test Equipment List and Details Manufacturer Description Model Serial Number Calibration Date Calibration Due Date Agilent USB Wideband Power Sensor U2022XA MY5417011 2020-09-12 2021-09-12 E-Microwave Coaxial Attenuators OE01203239 Each time EMCA10-

5RN-6 Unknown Coaxial Cable C-SJ00-0010 C0010/04 Each time N/A N/A

* Statement of Traceability: Bay Area Compliance Laboratories Corp. (Dongguan) attests that all calibrations have been performed, traceable to National Primary Standards and International System of Units (SI). Test Data Environmental Conditions Temperature:

Relative Humidity:

ATM Pressure:

Test by:

Test Date:

26.5 oC 45%

100.7 kPa Billy Li 2020-10-14 Page 36 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 Test Mode: Transmitting Test Result: Compliance. Please refer to the following table. Mode Channel Frequency

(MHz) Maximum Peak Conducted Output Power Limits

(dBm) 802.11b 802.11g 802.11n th20 802.11n th40 Low Middle High Low Middle High Low Middle High Low Middle High 2412 2437 2462 2412 2437 2462 2412 2437 2462 2422 2437 2452

(dBm) 12.11 13.19 13.72 13.69 14.32 14.79 13.65 14.78 15.74 14.73 15.17 15.37 30 30 30 30 30 30 30 30 30 30 30 30 Page 37 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 FCC 15.247(d) 100 kHz BANDWIDTH OF FREQUENCY BAND EDGE Applicable Standard According to FCC15.247(d):In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, as permitted under paragraph (b)(3) of this section, the attenuation required under this paragraph shall be 30 dB instead of 20 dB. Attenuation below the general limits specified in 15.209(a) is not required. In addition, radiated emissions which fall in the restricted bands, as defined in 15.205(a), must also comply with the radiated emission limits specified in 15.209(a) (see 15.205(c)). Test Procedure 1. Check the calibration of the measuring instrument using either an internal calibrator or a known signal from an external generator. 2. Position the EUT without connection to measurement instrument. Turn on the EUT and connect its antenna terminal to measurement instrument via a low loss cable. Then set it to any one measured frequency within its operating range, and make sure the instrument is operated in its linear range. 3. Set RBW to 100 kHz and VBW of spectrum analyzer to 300 kHz with a convenient frequency span including 100 kHz bandwidth from band edge. 4. Measure the highest amplitude appearing on spectral display and set it as a reference level. Plot the graph with marking the highest point and edge frequency. 5. Repeat above procedures until all measured frequencies were complete. Test Equipment List and Details Manufacturer Description Model Serial Number Calibration Date Calibration Due Date 2021-07-07 R&S Spectrum Analyzer FSP 38 100478 2020-07-07 Unknown Coaxial Cable C-SJ00-0010 C0010/03 Each time N/A

* Statement of Traceability: Bay Area Compliance Laboratories Corp. (Dongguan) attests that all calibrations have been performed, traceable to National Primary Standards and International System of Units (SI). Test Data Environmental Conditions Temperature:

Relative Humidity:

ATM Pressure:

Test by:

Test Date:

Test mode: Transmitting 26.5 oC 45%

100.7 kPa Billy Li 2020-10-14 Page 38 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 Test Result: Compliance. Please refer to following plots. Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB 802.11b: Band Edge, Left Side

RBW 100 kHz VBW 300 kHz SWT 5 ms Delta 1 [T1 ]

-46.33 dB

-13.536000000 MHz Marker 1 [T1 ]

3.55 dBm 2.413056000 GHz 1 1 PK MAXH

-16.45 dBm 10 0

-10

-20

-30

-40

-50

-60

-70

-80 10 0

-10

-20

-30

-40

-50

-60

-70

-80 Center 2.4 GHz 4.8 MHz/

Span 48 MHz Date: 29.SEP.2020 23:28:16 802.11b: Band Edge, Right Side Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB

-16.06 dBm

RBW 100 kHz VBW 300 kHz SWT 10 ms Delta 1 [T1 ]

-48.72 dB 25.456000000 MHz Marker 1 [T1 ]

3.94 dBm 2.462516000 GHz 1 PK MAXH 1 1 1 A LVL 3DB A LVL 3DB Center 2.4835 GHz 8.6 MHz/

Span 86 MHz Date: 29.SEP.2020 23:31:03 Page 39 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB 802.11g: Band Edge, Left Side

RBW 100 kHz VBW 300 kHz SWT 5 ms Delta 1 [T1 ]

-35.42 dB

-13.440000000 MHz Marker 1 [T1 ]

-3.99 dBm 2.413248000 GHz 1 1 PK MAXH

-20

-23.99 dBm 10 0

-10

-30

-40

-50

-60

-70

-80 10 0

-10

-20

-30

-40

-50

-60

-70

-80 Center 2.4 GHz 4.8 MHz/

Span 48 MHz Date: 29.SEP.2020 23:34:12 802.11g: Band Edge, Right Side Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB

-23.01 dBm

RBW 100 kHz VBW 300 kHz SWT 10 ms Delta 1 [T1 ]

-37.07 dB 15.136000000 MHz Marker 1 [T1 ]

-3.01 dBm 2.469396000 GHz 1 PK MAXH 1 1 1 A LVL 3DB A LVL 3DB Center 2.4835 GHz 8.6 MHz/

Span 86 MHz Date: 29.SEP.2020 23:32:42 Page 40 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 802.11n ht20 Band Edge, Left Side Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB

RBW 100 kHz VBW 300 kHz SWT 5 ms Delta 1 [T1 ]

-34.81 dB

-13.344000000 MHz Marker 1 [T1 ]

-3.74 dBm 2.413248000 GHz 1 1 PK MAXH

-20

-23.74 dBm Center 2.4 GHz 4.8 MHz/

Span 48 MHz Date: 29.SEP.2020 23:37:33 802.11n ht20 Band Edge, Right Side Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB

-22.23 dBm

RBW 100 kHz VBW 300 kHz SWT 10 ms Delta 1 [T1 ]

-36.33 dB 29.240000000 MHz Marker 1 [T1 ]

-2.23 dBm 2.454432000 GHz 1 PK MAXH 1 1 1 10 0

-10

-30

-40

-50

-60

-70

-80 10 0

-10

-20

-30

-40

-50

-60

-70

-80 A LVL 3DB A LVL 3DB Center 2.4835 GHz 8.6 MHz/

Span 86 MHz Date: 29.SEP.2020 23:40:57 Page 41 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 802.11n ht40 Band Edge, Left Side

RBW 100 kHz VBW 300 kHz SWT 10 ms Delta 1 [T1 ]

-34.29 dB

-37.312000000 MHz Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB Marker 1 [T1 ]

-4.42 dBm 2.437136000 GHz A 1 LVL 1 PK MAXH

-20

-24.42 dBm 1 3DB Center 2.4 GHz 8.8 MHz/

Span 88 MHz Date: 29.SEP.2020 23:45:53 802.11n ht40 Band Edge, Right Side Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB

-24.27 dBm

RBW 100 kHz VBW 300 kHz SWT 15 ms Delta 1 [T1 ]

-27.98 dB 39.060000000 MHz Marker 1 [T1 ]

-4.27 dBm 2.444440000 GHz 1 PK MAXH 1 A LVL 3DB 1 10 0

-10

-30

-40

-50

-60

-70

-80 10 0

-10

-20

-30

-40

-50

-60

-70

-80 Center 2.4835 GHz 12.6 MHz/

Span 126 MHz Date: 29.SEP.2020 23:43:31 Page 42 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 FCC 15.247(e) - POWER SPECTRAL DENSITY Applicable Standard For digitally modulated systems, the power spectral density conducted from the intentional radiator to the antenna shall not be greater than 8 dBm in any 3 kHz band during any time interval of continuous transmission. This power spectral density shall be determined in accordance with the provisions of paragraph (b) of this section. The same method of determining the conducted output power shall be used to determine the power spectral density. Test Procedure 1. Check the calibration of the measuring instrument using either an internal calibrator or a known signal from an external generator. 2. Position the EUT was set without connection to measurement instrument. Turn on the EUT and connect its antenna terminal to measurement instrument via a low loss cable. Then set it to any one measured frequency within its operating range, and make sure the instrument is operated in its linear range. 3. Set the RBW = 3 kHz, VBW = 10 kHz, Set the span to 1.5 times the DTS bandwidth. 4. Use the peak marker function to determine the maximum amplitude level. Test Equipment List and Details Manufacturer Description Model Serial Number Calibration Date Calibration Due Date R&S Spectrum Analyzer FSP 38 100478 2020-07-07 2021-07-07 Unknown Coaxial Cable C-SJ00-0010 C0010/03 Each time N/A

* Statement of Traceability: Bay Area Compliance Laboratories Corp. (Dongguan) attests that all calibrations have been performed, traceable to National Primary Standards and International System of Units (SI). Test Data Environmental Conditions Temperature:

Relative Humidity:

ATM Pressure:

Test by:

Test Date:

26.5 oC 45%

100.7 kPa Billy Li 2020-10-14 Test Result: Compliance. Please refer to the following table and plots Page 43 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 Test Mode: Transmitting Mode Channel Frequency

(MHz) Power Spectral Density

(dBm/3kHz) Limit

(dBm/3kHz) 802.11 b 802.11 g 802.11n ht20 802.11n ht40 Low Middle High Low Middle High Low Middle High Low Middle High 2412 2437 2462 2412 2437 2462 2412 2437 2462 2422 2437 2452

-10.55

-9.53

-9.69

-18.63

-16.49

-16.81

-18.03

-17.08

-15.93

-19.40

-18.42

-18.73 Power Spectral Density, 802.11b Low Channel Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB

RBW 3 kHz VBW 10 kHz SWT 1.55 s Marker 1 [T1 ]

-10.55 dBm 2.408990013 GHz 1 PK MAXH 1 8 A LVL 3DB 10 0

-10

-20

-30

-40

-50

-60

-70

-80 Center 2.412 GHz 1.35585 MHz/

Span 13.5585 MHz Date: 29.SEP.2020 23:28:03 Page 44 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 Power Spectral Density, 802.11b Middle Channel Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB

RBW 3 kHz VBW 10 kHz SWT 1.45 s Marker 1 [T1 ]

-9.53 dBm 2.436352000 GHz 1 1 1 PK MAXH 10 0

-10

-20

-30

-40

-50

-60

-70

-80 1 PK MAXH 10 0

-10

-20

-30

-40

-50

-60

-70

-80 Center 2.437 GHz 1.296 MHz/

Span 12.96 MHz Date: 29.SEP.2020 23:29:54 Power Spectral Density, 802.11b High Channel Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB

RBW 3 kHz VBW 10 kHz SWT 1.55 s Marker 1 [T1 ]

-9.69 dBm 2.461186490 GHz A LVL 3DB A LVL 3DB Center 2.462 GHz 1.35585 MHz/

Span 13.5585 MHz Date: 29.SEP.2020 23:30:50 Page 45 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 Power Spectral Density, 802.11g Low Channel Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB

RBW 3 kHz VBW 10 kHz SWT 2.8 s Marker 1 [T1 ]

-18.63 dBm 2.414818080 GHz 1 1 PK MAXH 1 PK MAXH 10 0

-10

-20

-30

-40

-50

-60

-70

-80 10 0

-10

-20

-30

-40

-50

-60

-70

-80 Center 2.412 GHz 2.472 MHz/

Span 24.72 MHz Date: 29.SEP.2020 23:33:59 Power Spectral Density, 802.11g Middle Channel Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB

RBW 3 kHz VBW 10 kHz SWT 2.8 s Marker 1 [T1 ]

-16.49 dBm 2.430144160 GHz 1 A LVL 3DB A LVL 3DB Center 2.437 GHz 2.484 MHz/

Span 24.84 MHz Date: 29.SEP.2020 23:35:40 Page 46 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 Power Spectral Density, 802.11g High Channel Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB

RBW 3 kHz VBW 10 kHz SWT 2.8 s Marker 1 [T1 ]

-16.81 dBm 2.458242560 GHz 1 1 PK MAXH 1 PK MAXH 10 0

-10

-20

-30

-40

-50

-60

-70

-80 10 0

-10

-20

-30

-40

-50

-60

-70

-80 Center 2.462 GHz 2.472 MHz/

Span 24.72 MHz Date: 29.SEP.2020 23:32:26 Power Spectral Density, 802.11n ht20 Low Channel Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB

RBW 3 kHz VBW 10 kHz SWT 3 s Marker 1 [T1 ]

-18.03 dBm 2.415468960 GHz 1 A LVL 3DB A LVL 3DB Center 2.412 GHz 2.628 MHz/

Span 26.28 MHz Date: 29.SEP.2020 23:37:17 Page 47 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 Power Spectral Density, 802.11n ht20 Middle Channel Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB

RBW 3 kHz VBW 10 kHz SWT 3 s Marker 1 [T1 ]

-17.08 dBm 2.435107840 GHz 1 1 PK MAXH 1 PK MAXH 10 0

-10

-20

-30

-40

-50

-60

-70

-80 10 0

-10

-20

-30

-40

-50

-60

-70

-80 Center 2.437 GHz 2.628 MHz/

Span 26.28 MHz Date: 29.SEP.2020 23:39:14 Power Spectral Density, 802.11n ht20 High Channel Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB

RBW 3 kHz VBW 10 kHz SWT 3 s Marker 1 [T1 ]

-15.93 dBm 2.469148160 GHz 1 A LVL 3DB A LVL 3DB Center 2.462 GHz 2.628 MHz/

Span 26.28 MHz Date: 29.SEP.2020 23:40:45 Page 48 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 Power Spectral Density, 802.11n ht40 Low Channel Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB

RBW 3 kHz VBW 10 kHz SWT 6.2 s Marker 1 [T1 ]

-19.40 dBm 2.435126080 GHz 1 PK MAXH 1 PK MAXH 10 0

-10

-20

-30

-40

-50

-60

-70

-80 10 0

-10

-20

-30

-40

-50

-60

-70

-80 Center 2.422 GHz 5.424 MHz/

Span 54.24 MHz Date: 29.SEP.2020 23:45:37 Power Spectral Density, 802.11n ht40 Middle Channel Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB

RBW 3 kHz VBW 10 kHz SWT 6 s Marker 1 [T1 ]

-18.42 dBm 2.444560000 GHz 1 1 A LVL 3DB A LVL 3DB Center 2.437 GHz 5.4 MHz/

Span 54 MHz Date: 29.SEP.2020 23:47:55 Page 49 of 50 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200910010-00 Power Spectral Density, 802.11n ht40 High Channel Ref 20 dBm

Att 30 dB 20 Offset 0.5 dB

RBW 3 kHz VBW 10 kHz SWT 6.2 s Marker 1 [T1 ]

-18.73 dBm 2.460786880 GHz 1 A LVL 3DB 1 PK MAXH 10 0

-10

-20

-30

-40

-50

-60

-70

-80 Center 2.452 GHz 5.424 MHz/

Span 54.24 MHz Date: 29.SEP.2020 23:43:18

***** END OF REPORT *****

Page 50 of 50

 

 

SHENZHENTENDATECHNOLOGYCO.,LTD. ADD: 68 Floor, Tower E3, No. 1001, Zhongshanyuan Road, Nanshan District, Shenzhen, China. 518052 TEL:8675527657098 FAX:86675527657178 Email:cert@tenda.cn DECLARATION OF SIMILARITY Date:20201024 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam:

We, SHENZHEN TENDA TECHNOLOGY CO., LTD.hereby declare that the product: Security Pan/Tilt Camera 2K, FCC ID: VT7CP6. model: CP7,CP5 is electrically identical with the model:CP6 which was tested by BACL with the same electromagnetic emissions and electromagnetic compatibility characteristics. A description of the differences between those models and that are declared similar are as follows:

They are the same product, and just the different model name, the rest are the same. Please contact me should there be need for any additional clarification or information. Best Regards, Signature:

PrintedName:Shen Yue Title:Engineer