Wireless Alarm System User Manual Note:
1.As the alarm system is pre-programmed , you can proceed to Part 2 of the manual for setup.
(Or please search HTZSAFE T804 & 808A SETUP on YouTube, where there is a video for your reference.)
2.If you want to add additional HTZSAFE sensors/receivers to the system,set them up according to Part 3 of the manual or contact us directly.
(Or please search HTZSAFE T804 to 808A Connect on YouTube,where there is a video for your reference.)
After-sale Service:
E-mail:
[email protected] 1.Components and Functions of the System Plug-in Receiver Indicator Light Power Plug Volume Tone 1 Power Plug: Plug the receiver into the socket. Volume: 5 volume levels are adjustable(includes mute mode). Tone: 35 tones are for choice. Indicator Light: It flashes for several seconds when the sensor is activated, and it flashes once every 8 seconds if the battery of the sensors is running out. Vent Hole Battery Compartment Indicator Light Sensitivity Switches Step 2 Select the sensitivity (High / Low) If high sensitivity is selected, the detection range of the sensor is 50 feet(15 m);
If low sensitivity the detection range of the sensor is 35 feet(10 m). is selected
, Speaker Speaker: It sounds for several seconds when the sensor is activated. Wireless Motion Sensor Sensor Eye It flashes once to indicate that the motion sensor Used to balance the pressure even in the extremely harsh Vent Hole:
environment to guarantee the waterproof performance. Indicator Light:
has been activated and has sent wireless signals. Battery Compartment: Load 3 pieces of AA 1.5V alkaline batteries
(batteries are not included in the product). Sensitivity Switches:
the sensor(High/Low adjustable). used to adjust the sensitivity level of It is 2. Operation Instructions Step 1 Plug the receiver into the socket. Step 4 Wave your hands in front of the sensor eye to activate it. Step 6 Press "Tone" once to choose the tone for this sensor. There are 35 tones for choice. 1 foot way a Tone Sensitivity Switches Step 7 Set up in the same way if you have the additional sensors, or refer to Part 3 of the manual for other settings.
(The indicator light of the sensor will flash once to indicate that the sensor has been activated,and then the sensor will be automatically reset after a few seconds later ready for next trigger.) Step 8 Installation. Wireless Motion Sensor Step 3 Load 3 pieces of AA 1.5V alkaline batteries and note the positive and negative poles(batteries are not included in the product). Step 5 Fix the back cover ( The back cover must be fixed well to ensure the waterproof effect if the sensor is installed outdoors). Long screws Sensor Eye: detects heat movements. It 2 The indicator light of the receiver will flash once and give a beep prompt to indicate that it is ready for normal operation.
(The indicator light will be on for 5 seconds to indicate that the system works properly,and wait for about 30 seconds to activate the sensor.) 3 4 5 6 Short screws 1 2 3 Installation Notes:
3. Other Settings 1. Please fix the sensor tightly to ensure that the position and the direction will not be moved easily by the wind. 2.Point the sensor towards an open field
(not towards the trees or bushes).
(1)How to add additional sensors/receivers to the system
(up to 32 sensors can be added to one or several receivers) Step 1 Plug the receiver into the socket. Step 2 Press and hold the "Volume" button for 5 seconds,and release the button when you hear a beep prompt and the indicator light flashes. a 1 foot way Flashing quickly
(The indicator light will flash once to indicate that the motion sensor has been activated and has sent wireless signals)
(The receiver has a tone prompt and the indicator light flashes quickly indicate that the sensor has been added to the plug-in receiver successfully) Step 4 Activate the sensor again to confirm that the sensor has been added to the receiver already. Light up Flashing slowly Step 5 Press "Tone" button to select a tone for this sensor. There are 35 tones for choice.
(2)How to delete the sensors of the receiver Step 1 Plug the receiver into the socket. Step 2 Press and hold both the "Volume" button and "Tone" button for 10 seconds and release the buttons when you hear a long beep prompt;
Note: all the sensors will be deleted by this operation. 3.Adjust the sensor a little downwards(never upwards). Volume Volume 4.The working principle of the senor is detecting the moving objects with heat.Please point the sensor eye towards the engine or exhaust pipe in case of detecting vehicles. Step 3 Activate the sensor. Note:Please put the sensor close to the plug-in receiver. 7 8 9 Press and hold the for 5 seconds Volume button Release the button Volume Tone
(3)How to adjust the alarm volume Step 1 Plug the receiver into the socket. Step 2 Press the "Volume" to adjust the volume of the receiver
(5 volume levels are adjustable,include mute mode-no sound only light flashing). Volume Technical Parameters Item Working Voltage Working Current Technical Parameters AC 100V-240V Static Current:20mA; Alarming Current:300mA Wireless Frequenc y 434.6MHz FSK Wireless Motion Sensor
(4)How to change the tone for the sensors
(35 tones are for choice,and you can match different tones for different sensors.) Step 1 Plug the receiver into the socket. Step 2 Activate the sensor first,and then press the "Tone" button to choose the tone for this sensor. Repeat the steps for other sensors which have been added to the receiver already. 4. Technical Parameters Plug-in Receiver 1.77 in
(45mm) 3.43 in
(87mm) 3.94 in
(100mm 2.95 in
(75mm) 2.56 in
(65mm) 1.18 in
(30mm) Technical Parameters Item Technical Parameters Detection Range Detection Angle Wireless Transmission Range Wireless Frequency Low sensitivity----35 feet(10m) High sensitivity----50 feet(15m) 15 1/2 Mile (800m) 434.6 MHz FSK Working Voltage Battery Type Working Current Working Temperature Range -22F to 158F-30 to 70) 4.5V 3pcs AA 1.5V Alkaline Batteries(not included) Static1mA; Alarming100mA After-sale Service E-mail: [email protected] 3.19 in
(81mm) 10 2.4 in
(61mm) 11 30-HB
-808A(6.5.05)T804(4.1)-
202411-07-Jing FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
