FCC ID: 2ANOA-X11 Car Wireless Charger

This smart car wireless charging stand is an intelligent product with a Simple design,Safe, support Qi standard, Compatible with all wireless charging mobile phones that support qi standard protocol . No need to plug in the data cable when charging the phone, which provides you with a convenient and safe charging environment. 1.Get the air vent clip from the package 3. The product will automatically adjust the extendable foot according to the size of the mobile phone, and automatically calibrate the position of the wireless charging coil. 5.Two clips will automatically open an grip your moblie phone when you place moblie phone close to wireless charger holder with 100MM, At this time, the LED light status is blue (charging). LED lights Wireless charging area 2. After get the air vent clip from the package, align the position of the mounting nut and rotate the nut to clamp the air vent clip 4.After installed wireless charger with air vent,place it on related position in the car,connecting USB cable At this time, the LED light status is colorful cycle breathing (standby) 6.When wireless charger is in abnormal working state,(detects other objiects or dysfunctiTohne) status of the LED light is flashing red. Three-axis linkage LED lights 15W Input5V/2A9V/1.67A Ouput power15W/10W /7.5W /5W Charging distance8mm Charging efficency76 Operation Frequency110kHz-205KHz X11 FCC Statement FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna. 3-in-1 wireless charging station

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Radiation Exposure Statement This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

Pa 0. LOW WW OF OF OF OF OS 09 04 08 06 QOLOL Oz OF OP os Oo

Z 001 00Zor oz oc oF chharhtmamammeM MAM. NAMM

Shenzhen Tengsai Technology Co., LTD Room 203, Building A, No. 12, Xiawei Industrial Zone, Zhangxi Community, Guanhu Street, Longhua District, Shenzhen, China Tel: +86-0755-23004002 E-mail: 214619210@163.com Series Models Description Date: 2022/2/28 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD FCC ID: 2ANOA-X11 Dear Sir/Madam, We, Shenzhen Tengsai Technology Co., LTD Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only color and model number is different for these model:

Product name:

Model no.:

Car Wireless Charger X11, V8, X8, X9, X10, X12, X13, X15, X16, X17, X18, X19, X20, X21, X22, X23, X25, X26, X27, X28, X29 Sincerely, Name:

Company:

Address:

Phone:

Fax:

E-Mail:

Guangming Hu Shenzhen Tengsai Technology Co., LTD

#201, Building E, Zone C Shangxue Science and Technology Industrial City, Xinxue Community, Bantian Road, Longgang District, Shenzhen, Guangdong, China

+86-0755-23004002 N/A 214619210@163.com

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date: 2022/2/28 TO WHOM IT MAY CONCERN Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID 2ANOA-X11 Model name X11, V8, X8, X9, X10, X12, X13, X15, X16, X17, X18, X19, X20, X21, X22, X23, X25, X26, X27, X28, X29 For the product stated above, we request that the following information be held confidential;

Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Guangming Hu Name:

Company: Shenzhen Tengsai Technology Co., LTD Address:

#201, Building E, Zone C Shangxue Science and Technology Industrial City, Xinxue Community, Bantian Road, Longgang District, Shenzhen, Guangdong, China

+86-0755-23004002 N/A 214619210@163.com Phone:

Fax:

E-Mail:

Shenzhen Tengsai Technology Co., LTD Room 203, Building A, No. 12, Xiawei Industrial Zone, Zhangxi Community, Guanhu Street, Longhua District, Shenzhen, China Tel: +86-0755-23004002 E-mail: 214619210@163.com Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 3/1/2022 To whom it may concern:

We, Shenzhen Tengsai Technology Co., LTD the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2ANOA-X11 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name:

Company:

Address:

Phone:

Fax:

E-Mail:

Guangming Hu Shenzhen Tengsai Technology Co., LTD

#201, Building E, Zone C Shangxue Science and Technology Industrial City, Xinxue Community, Bantian Road, Longgang District, Shenzhen, Guangdong, China

+86-0755-23004002 N/A 214619210@163.com