FCC ID: 2AGA5-F5 Pen Holder with Wireless Charger

Pen Holder with Wireless Charger

RF Exposure Statement To maintain compliance with FCC's RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter

FCC ID LABEL:

FCC ID: 2AGA5-F5 Ca. 5mm x 10mm Include in manual:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Label Location

SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED Agent Authorization Company: SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED Address: 4/F, Building 25, Phase II, Lianchuang Technology Park, Bulan Rd, Nanwan St., Longgang District, Shenzhen, China Product Name: Pen Holder with Wireless Charger Model Number(s): F5(QC-905WT), F5(QC-905BK) Product Description: Pen Holder with Wireless Charger We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Junxing Qiu Title:

CEO Date: Feb. 01, 2021 Company: SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED

Letter of Declaration Company: SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED Address:

4/F, Building 25, Phase II, Lianchuang Technology Park, Bulan Rd, Nanwan St., Longgang District, Shenzhen, China Product Name: Pen Holder with Wireless Charger Model Number: F5(QC-905WT), F5(QC-905BK) FCC Identifier: 2AGA5-F5 Compliant with KDB680106 D01 RF Exposure Wireless Charging Apps v03 section 5,b

(1) Power transfer frequency is less than 1 MHz.

-The device operate in the frequency range 125KHz.

(2) Output power from each primary coil is less than or equal to 15 watts.

-The maximum output power of the primary coil is 5W

(3) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils.

-The transfer system including a charging system with only single primary coils is to detect and allow only

(4) Client device is placed directly in contact with the transmitter.

-The EUT is placed directly in contact with the transmitter

(5) Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion).

-The EUT is a mobile exposure conditions only.

(6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit.

- The EUT meet the conditions. Title: CEO Name: Junxing Qiu Date: Feb. 01, 2021 Signature of applicant:

< SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED>

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD21046 Subject; Request for Long Term Confidentiality FCC ID: 2AGA5-F5 Date: Feb. 01, 2021 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Name: Junxing Qiu Date: Feb. 01, 2021 Title: CEO Signature of applicant:

Model Difference Declaration To Whom It May Concern, We, SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED(Pen Holder with Wireless Charger) Trademark:MIABOO; Model Number:F5(QC-905WT), F5(QC-905BK); All models the function, software and electric circuit are the same, only with a product model named and color different. Test sample model: F5(QC-905WT). Please contact me if you have any question. Name: Junxing Qiu Date: Feb. 01, 2021 Title: CEO Signature of applicant: