P r o d u c t C a t a l o g Gateway Device P r o d u c t M o d e l S80-A3-GTZ T y p i c a l A p p l i c a t i o n s Environment monitoring for machine rooms or cabinets. FCC ID: 2AUAG-S80-A3-GTZ T e c h n i c a l S p e c i f i c a t i o n s M a j o r F e a t u r e s Operating Voltage Network ResponseTime Communication Ports Transmission Power Supported Humidity Quantity Overvoltage and Overcurrent Protection Operating Temperature Material Protection Level MTBF MTTR Failure rate Operating Humidity Lightning Protection Operating Environment Size DC9~30V
<500ms Upstream: Modbus-TCP Downstream: Zigbee 4.5dBm 65 Power:30V/500mARS485 5V/200mA
-10 ~ 55 degrees Celsius Fireproofing ABS IP20
>20000h
<1h 0.1%/year 5%~95% (no condensation) Power, Ethernet port600W surge RS4852KV/1KA Indoors 70*105*30mm
One gateway can be connected to 65 Zigbee terminal sensors at most.
Zigbee terminal management: binding, unbinding and so on.
Collect data of humidity, temperature and power level from humidity terminal sensors
Collect voltage status of the detection module.
Support Zigbee network. 0755-89801234 0755-89809898 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. Responsible for compliance could void the users authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). the party Any Changes or modifications not expressly approved by responsible for compliance could void the user's authority to operate the equipment. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with
. minimum distance 20cm between the radiator and your body.