I Main user interface II Start Here open c. Pairing with cellphone III Charging Micro USB Charging Port Power on/off Bluetooth Earphone G33 User Manual B C A A.Contact Charging point B.Function Button C.Microphone D.Charging USB Port E.Charging Status LED F.Power On/Off a. Open Charging Dock case, take out the earbuds b. Automatic Pairing Press and hold 1s D F L R For initial use, press 1s the function button of the both earbuds respectively to power on, the earbuds will pair with each other automatically.
(Voice Notice: Power on --->TWS Connected) Bluetooth Turn on Bluetooth Device name Available Devices Air headset Available Devices Air headset d. Power off Press and hold for 1s Open cellphone bluetooth and set it as Open detection, when Air Headset appears in available devices, press to connect. The LED flash in Blue continuously.
(Voice Notice: Connected) Press and hold 1s the function button for either earbud, two earbuds will be powered off at the same time. IV More functions Function Button L a.The LED flashes in Red and there is a Voice Notice when the Battery Power Low. b.Press the Power On/Off button before charging c.If there is no external power supply, the LED ON in red, and it will be Off after fully charged d.If there is external power supply, LED flashes in Blue while charging and it will be on in Blue after fully charged a.Press the function button once to answer calls, Press Function Button twice to reject calls. b.Press the function button once to pause while at Music Mode. V Important Notice for Single Earbud using Press and hold for 5s, enter manual pairing
(use left earbud as sample) a.The earbuds can be used individually (each earbud pairs to separate cellphone) b.Before using as single earbud separate pairing, all the previous Air Headset Pairing records need to be erased c.While use Left (or Right) earbud separately, press and hold the function button for 5s, earbud enters manual pairing mode, the LED flashes between Red and Blue, open cellphone Bluetooth and search for Air Headset and then connect. The LED will be on in Blue after Successfully connected. (Voice Notice: Pairing--->Connected) d.After using the earbuds as single mode and go back to use as dual earbuds connection, all Air Headset pairing records in the cellphone need to be erased in advance. VI Default Setting recovery Press and hold both buttons for 10s until the earbuds power off, the default setting recovery completed Manually Default Setting recovery: Make sure the power is enough, put two earbuds close and then Press and Hold the both function button for 10s, after the Power Off-->Power On-->Power Off processes completed, release both button and the default setting recovery completed. Basic Parameter Product NameAir Headset Operation range10m Charging time1.5 hours Call time8 hours Music Time6 hours Charging Input5V 1A Battery TypePolymer Li-Ion Battery Earbud weight6g+6g Important Notice Please make sure the product is fully charged before initial use. Please use the brand adaptor complying safety requirements to charge this product. If your cellphone can not find Air Headset, please double check if your cellphone Bluetooth is at Equipment visible mode. After initial pairing, the earbuds will automatically pair for repeat use. If no use for a long time, need to follow up pairing procedures to pair with the cellphone. If there is one earbud has sound while in music mode, please restart the earbuds or manually recover the default setting. Security warning Warranty Please use the product in the temperature between 0 C-45 C. When the enviroment temperature is too high or low, it may cause the product malfunction. Please keep the product dry, do not contact water or humidity enviroment Please do not drop, throw, pull/drag the product to prevent damage. Please power off before clean the product. Please use the product at proper volume while listenning music or answering call, long time at high volume usage could lead to permanent hearing loss. The built in battery is not dismountable, please do not replace by yourself. If it's really necessary, please ask help from authorized service center. Please dispose the product according to local law, can not treat it as domestic garbage. Without adult supervision, please keep the product out of reach of children, the swallow of small components included may cause asphyxia. This product is covered under warranty for a period of oneyear from the date of purchase limited to normal use and maintenance of the machine parts, materials and functions. Problems and failures verified upon fur-
ther identification, will be provided free repair and replacement parts. Limited to the following:
A. Headset is beyond the warranty period;
B. User does not follow the instructions. so that the headphone wire and earplug broken. C. Without the authorization to dismount, repair, alteration structures;
D. Cant provide proof of purchase. E. Man made damage. F. Due to natural disasters and other force majeure (such as earthquakes, fires) product failure of damage causes;
Warranty Card Users name Users telephone#
Users Add Date of purchase Invoice #
Dealers name Dealers Add Dealers telephone#
QC Report info Model #
Inspector Date FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.