FCC ID: 2AWONUT88875 Smart LED Flood Light

Smart LED Flood Light User Guide Manual Version: UT88875-RGBW / V1.0

Smart LED Flood Light User Guide Before installation, lets know how the whole thing works. Voice Control Voice Control Step One: Install the smart ood light. Step Two: Fundamental set-up-Connect smart LED ood light to Smart Life App. Step Three & Four: Optional set-up - Connect Smart Life App to Amazon Alexa or Google Assistant. After completing Step Two, you can remote control the light on Smart Life App. After completing Step Three and Four, you can voice control the light with Alexa or Google Assistant. This manual consists of Four parts. Part One - How to install the light ?2 - 7 Part Two - How to pair the light to Smart Life app? 8 - 13 Part Three - How to control the light with Amazon Alexa? 14 - 16 Part Four - How to control the light with Google Assistant? 17 - 18 1

Warning Part One - How to insall the light?

(1) Please check if the light and the parts are intact before installation.

(2) Make sure to cut off power before installation.

(3) Please do not place this light in corrosive conditions.

(4) If there is any damage to the cord, please cut off the power and stop using it immediately.

(5) Please do not retrofit the light within the warranty period.

(6) To ensure the light works properly, please use the voltage indicated on the packing. 1. Parameters Model Total Wattage Max Luminous Flux Input Voltage Color Color Temperature Frequency Waterproof Rating Bean Angle Working temperature UT88875 40W 4000lm AC120V 2700K 50/60Hz RGB, Warm White Flood Lights IP66 Power Adapter IP44 120

-20~40 2

2. Components Flood Light Power Adapter Package Includes:

Flood Lights Power Adapter Ground Sticks Screws L Shaped Hex Key Wrench User Manual x 6 x 1 x 6 x 7 x 1 x 1 3

3. Dimension 3m/10ft 3m/10ft 3m/10ft 3m/10ft 3m/10ft 1 0 c m

4 0 n

. i 14cm/5.5in 3.2cm/1.26in t f 0 1

m 3 1 2 c m

4

. 7 n i 1 6 c m

6 3 n

. i Note:

1. The ood lights and cables can not be extended, Do not cut the cable. 2. Use this product with the provided power adapter only. 3. The power adapter is IP44 grade waterproof, which can not be directly used outdoor. Please connect to a indoor socket, or use a waterproof box. 4. The ood lights are IP66 grade waterproof, which can be used outdoor. But do not immerse the lights in water. 4

4. Installation Scenario 1:

Step A: According to the spacing of two screw bits on the bracket, drill two holes on the mounting panel. A Note: Maximum mounting height is over 5m. Step B: Aim the bracket at the holes and fix it with two bolts (not included). Step C: Adjust the lighting direction up or down as per your need and plug in to power the light on. B C 5

Scenario 2:

Step A: Attach the ground stick to the Flood light, with the screw provided in the package. A Step B: Tighten the screw with the Hex Key Wrench. Step C: Adjust the lighting direction up or down as per your need and plug in to power the light on. B C 6

Note:

01 01 Make sure that the distance between the light and the object being lits is more than 1 meter, so as to avoid high temperature caused by short distance. The light source of this Iuminaire is not replaceable. Limitation of Indoor and Outdoor Use

(1) This light is waterproof and damp proof. It is protected against the rain, but it cannot be immersed in water.

(2) The mounting position of this light should be able to bear at least 10 times as heavy as the light.

(3) This light should be used in condition that is good for heat dissipation. Its working temperature should be less than 45C Too high the working temperature will cause serious lumen depression and affect lifespan of the light. FCC ID: 2AWONUT88875 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interferencethat may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 7

Part Two - How to pair the light to Smart Life app?

Before starting the paring, please make sure to turn on the Bluetooth and WiFi on your phone. The smart light only supports 2.4GHz WiFi network, not 5.0GHz. Please make sure the working network is 2.4GHz, and your phone is connected to it. If your WiFi router supports both 2.4GHz and 5.0GHz, please separate the two frequency bands in the router settings, and select the 2.4GHz for connection. The WiFi signal receiving module is built in the first ood light head (the one close to the power adapter). The maximum wireless connection distance is up to 65ft/20m. Step A : Smart Life app installation Please choose either way below to download and install the app.

(1) As per your phone system, choose the QR code to scan.

(2) Search keyword Smart Life in Apple Store or Google Play. Step B: Create an account on Smart Life and login. Note: Please keep your account and password in mind for Alexa or Google Assistant App pairing later. 8

Step C : Add the light to Smart Life App 1. Tap + button on top right corner to add devices. Tap Lighting, then choose PIR Light (BLE+Wi-Fi) to add the lights. 2. Power on the light with your own switch. Repeatedly turn on-off-on-off

-on-off-on switch (3 times) to activate the light into rapid blinking status

(about 0.5s per blink). Please make sure to keep an interval over 2 seconds between each turn-on and turn-off. Then click the Next button on this page. Find the lighting devices and click +. 9

3. Choose your WiFi network, enter your password, and tap the Next button. Then give a name to the light and tap the Done button. 10

Step D : Give a name to the light.

- A simple name is recommended for easier voice recognition with Alexa or Google Assistant.

- The name given to the light will be the same for voice control on Alexa or Google Assistant. Step E : Control the lights. The named light will be shown on the app homepage. Now you can control the light (turn on/off, change colors, adjust brightness ect) with Smart Life on the setting page. 11

Tips:

This botton sets the number of ood lights, please click and set to 6 . Click the botton, and select the color in the color plate, the color of all the ood lights will be changed at the same time. Click the botton, select the color in the color plate, and select the ood light you want, the color will be changed separately. Click the botton, and select the ood light, the ood light will be Click the botton, all the ood lights will be turn on/off at the same Click the White tab, you can set the ood lights to warm white and turn off separately. time. adjust the brightness.

12

How to group the lights?

Make sure all the lights have been paired to smart life app, then group the lights by following these steps. 1. Choose any light on the app, click the edit button on the top right corner, then click Create Group . 2. Choose the lights you want to group from the device list and rename the group. Now you can control the lights and sync with the music, the colors will be synchronized in the group. 1 2 3 13

Part Three How to control the light with Amazon Alexa?

Please make sure that your Alexa app is connected to Echo, and both work well under your WiFi network. Step A: Log in your Alexa App, tap top left corner, and tap Skills. Step B : Type Smart Life, find Smart Life from the search result and tap it to enable the skill. 14

Step C: Enter your Smart Life App account and password. Tap Link Now, then tap Authorize on the next page to bind Smart Life account to Alexa. Step D : When your Smart Life account is bound to Alexa, tap DISCOVER DEVICES to detect the light. Step C Step D Same account and password as Smart Life App Step E : When the named light is paired to Alexa from Smart Life, it will show on the device page (see the smart light example). 15

Step F: Now you can control the light with Alexa App on the setting page. To turn on or off the light, simply tap the bulb icon. Step G: You can also voice control the light with Alexa by giving these commands: Alexa, turn on device name,Alexa, set device name to color, Alexa, set device name to number. Device name is the one you give to the light. The light is named smart light in this user guide. For example, Alexa, turn on smart light, Alexa, set smart light to blue etc. Note: To control the light with Google Assistant, please continue to read Part Four. 16

Part Four How to control the light with Google Assistant?

Step A: Login Google Assistant App, tap Home Control on the left side bar page. Step B : Tap + button on the bottom right to enter next page. Step C: Find Smart Life from side bar list. 17

Step D: Enter your Smart Life App account and password to bind Smart Life account to Google Assistant. Step E : You will find the named light shows on the Home Control page. Now you can control the light on Google Assistant App, or voice control it by giving these commands: ok Google, turn on device name, ok Google, set device name to color, ok Google, set device name to number. Device name is the one you give to the light. The light is named smart light in this user guide. For example, ok Google, turn on smart light, ok Google, set smart light to blue etc. Step D Step E Same account and password as Smart Life App 18

Contact Us Have some issue? No worries! Please reach us via these channels. Our customer services team is more than happy to help. www.ustellar.com support@ustellar.com Manufacturer: Shenzhen Ustellar Technology Ltd.

(shen zhen shi you shi tuo ke ji you xian gong si ) Address:

19 E-manual Step 1: Scan the QR code Step 2: Click E Step 3: Rownload Go paper-free, make life easier, and do something good for the environment.

Smart LED Flood Light Ustellar Model: UT88875. PF: >0.5, Total Wattage: 40W Input Current: 600mA Voltage: ACI20V Frequency: 50/60Hz ta: 40-c DIC: 2230 Max Luminous Flux: 3600Im_ Manufacturer: Shenzhen Ustellar Technology Ltd.

(Shen zhen shi you shi tuo ke ji you xian gong si) Adress: C306, 3F,CBidg, Youth Entrepreneur Hub. iansheEast Road,

(inghua Community. Longhua Shenzhen. 518000 China Contact: support@ustellarcom FCC ID: 2AWONUT88875 This device complies with Part 15 of the FCC Rules. Operationis subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. SUITABLE FOR WET LOCATIONS;

SUITABLE FOR OPERATION IN AMBIENT NOT EXCEEDING 40C;

aIFE (-

14 Made in China

Shenzhen Ustellar Technology Ltd. Add: Rm.C306, 3/F,C Bldg., Youth Entrepreneur Hub, Jianshe East Road, Qinghua Community,Longhua ,Shenzhen,China Tel: 0755-21008194 Fax: 0755-21008194 Email: liushaolin@ustellar.com Date: 2022-05-25 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam:

We , Shenzhen Ustellar Technology Ltd., hereby authorizes China Certification ICT Co., Ltd (Dongguan) to act as a laboratory for testing and test report generation for the following project(s):

( Product name:Smart LED Flood Light, FCC ID:2AWONUT88875) The mainchip BK7231N which supports 2.4G WIFI ,BT and BLE Mode, But for this device, only 802.11b/g/n20/n40 and BLE(1M) were active, the others was disabled by software, Sincerely Yours, Clients signature Printed Name: Liu shaolin Title: Engineer QA-FR-170-B

Shenzhen Ustellar Technology Ltd. Add: Rm.C306, 3/F,C Bldg., Youth Entrepreneur Hub, Jianshe East Road, Qinghua Community,Longhua ,Shenzhen,China Tel: 0755-21008194 Fax: 0755-21008194 Email: liushaolin@ustellar.com FCC Confidential Authorization Date: 2022-05-25 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AWONUT88875 In accordance with Sections 0.457 and 0.459 of the Commissions Rules, (Shenzhen Ustellar Technology Ltd.) hereby requests long-term confidential treatment of information accompanying this application as outlined below:

Block Diagram Schematics Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature:

Printed Name: Liu shaolin Title: Engineer QA-FR-171-A

Shenzhen Ustellar Technology Ltd. Add: Rm.C306, 3/F,C Bldg., Youth Entrepreneur Hub, Jianshe East Road, Qinghua Community,Longhua ,Shenzhen,China Tel: 0755-21008194 Fax: 0755-21008194 Email: liushaolin@ustellar.com FCC Authorization Date: 2022-05-25 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We , Shenzhen Ustellar Technology Ltd., Hereby authorizes China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Clients signature Printed Name: Liu shaolin Title: Engineer QA-FR-170-B