Q6 USER MANUAL 3-IN-1 CHARGING STATION Product Function Introduction Wireless charging for iwatch devices Wireless charging area for iphone 12/13/14/15/16/17 series Specification Input voltage : 15V/3A,9V/3A Phone output : Max 25W TWS output : 5W Watch output : 5W Package Include Frequency : 115-205KHz(5W,7.5W, 10W,15W EPP) 360KHz(25W MPP) Receiving distance : 0-4mm Conversion rate : 80%
Appliccable temperature:0-35 Wireless Charging for Airpods or Earbuds Magnetic Wireless charger x1 Type-C quick charge cable x1 User manual x1 45W PD adapter x1 Please place the center of the mobile phone at the center of the charging board to get a better charging experience;
5. Do not put metal debris or magnetic cards on the charging board, which may cause metal hair, magnetic card damage, charger damage or other abnormalities;
6. If the receiving coil or the transmitting board is overheated and the charging stops during the use, please remove the charging device, wait for it to cool down, and try charging again. 7. Do not pull the power cord violently to avoid the power cord from breaking or falling off. 8. Please do not disassemble the product or put it into fire or water to avoid short circuits and leakage. 9. The standard temperature of wireless charger QI is 130F, but our product temperature is controlled within 130F. The charger will cut off the current when it is abnormally hot. Please contact us if any damage occurs. Applicable mobile phones : iphone12/13/14/15/16 /17series Wireless Earbuds : Airpods pro,Airpods 2/3/4[Wireless Version], Other Qi Wireless Earbuds Iwatch : support Apple Watch 1 -10 generation wireless charging LED Indicator Status Description 1. Connected to power supply : blue light flashes 3 times and turns off after 30s 2. Standby : light off 3. Quick charging : blue light stays on for 60 seconds and then turns off 4. Charging exception alert : blue light keeps flashing. Matters Needing Attention Precautions 1 . Do not place the product in water or near the fire source , so as not to cause malfunction of the charging equipment and mobile phone. 2 . Do not drop the device from a high place to avoid damage to the device due to falling to the ground. 3 . If you need to clean the charger, make sure it is not connected to the power supply. 4 . Please use 25W or above PD adapter or the PD adapter that comes with the product. 1. Please use a qualified PD protocol or QC protocol power charger, otherwise it may cause unstable charging or abnormal flicker;
2. If you need to use a protective case for your iPhone 12/13/14/15/16 during the charging, please use one with Mag safe;
3. Do not use a mobile phone protective shell with metal back or a mobile phone protective shell with a thickness greater than 4mm;
4. The receiving coil of a mobile phone that supports wireless charging is generally located at the center of the mobile phone. Manufacturer :Shenzhen USV Technology Co.,Ltd
