FCC ID: 2AY5D-T6 4-IN-1 Magnetic wireless charger

4 in 1 Wireless charger Product specifications 1. Compatible phone models: Iphone 12 & 13 series phones 2. Compatible TWS earphone: All Qi compatible TWS earphones 3. Compatible smart watch: Apple Watch 1-6 series 4. Compatible pencil : Apple pencil Gen 1 Cautions Product instructions 1. The blue LED light will flash 3 times when the product is powered on . 2. The blue LED will lights off when the product switch into standby mode . 3. When the product is in charging mode , the blue LED will last 60 seconds before lights off

(you can tap the touch switch to close it directly) 4. The blue LED will flash rapidly & constantly when the product under abnormal state , such as overvoltage , undervoltage , overcurrent , overheat, FOD condition (foreign object detection) and etc. 5. Tap the touch switch to turn the blue LED light on or off in anytime . Thank you for choosing KOOPAO's wireless charging station. To ensure that you have a good user experience, please Do read below instructions before using :

* Please use QC3.0 or PD protocol compatible AC adapter .

* Please use the fast charging cable support at least 2A current .

(It is recommended to use the adapter & charging cable that comes with the product to get a stable working performance, unqualified charger or cable may cause fault , abnormal state , or even damage the device been charging. ) 1. please keep the product away from the flame , liquid , falling or other factors that may damage the product . 2. Please power off the product before cleaning . Please clean only the surface and avoid the liquid from flowing inside. 3. This is a 4 in 1 charging station , to ensure a good working condition when fully connected with 4 devices, please use the adapter and charging cable that qualified to the requirements. 4. If any other questions you got, please be free to contact the KOOPAO's service team , we will respond within 48 hours. Mail: [email protected] FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation i s subject to the following

(1) This device may not cause harmful interference, and

(2) This device must accept any i nterference received, includin g interference that may cause undesired operation. two conditions:

Warning:

Changes or modifications not exp ressly approved by the party responsible for compliance could void the user's authority to operate the equipment. digital device, pursuant to Par t 15 of the FCC Rules. These reasonable protection against harmful tial installation. This equipment generates use s and NOTE: This equipment has been te sted and found to comply with the limits for a Class B limits are designed to provide interference in a residen can radiate r adio frequency energy and, if not installed accordance with the instructions, may cause harmful communications. However, there is no guarantee that interference will not occur in a interference to radio or by turning the equipment off and on, the the interference by one or more of the following Reorient or relocate the receiving an tenna. Increase the separation bet ween the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to particular installation. If this equipment does cause harmful television reception, which c an be determined by user is encouraged to try to correct interference to radio and used in measures:

which the receiver is connected. Consult the dealer or an experi enced radio/TV technician for h elp. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Label Location On EUT Label Product Name: 4-IN-1 Magnetic wireless charger Model No.: T6 FCC ID: 2AY5D-T6 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

Shenzhen USV Technology Co.,Ltd Declaration concerning Antenna Specification It is hereby declared that the product Model No.: T6 FCC ID : 2AY5D-T6 fulfills the requirement in FCC test relating to the antenna type. The device specified above confirms to the FCC recommendations for internal antenna type(s) described below:

Model No. of antenna: N/A Type of antenna:

Gain of the antenna:

Frequency range:

Inductive loop coil Antenna 0 dBi 110.1-205KHz Model No. of antenna: N/A Type of antenna:

Gain of the antenna:

Frequency range:

Inductive loop coil Antenna 0 dBi 325KHz, 216KHz Model No. of antenna: N/A Type of antenna:

Gain of the antenna:

Frequency range:

Inductive loop coil Antenna 0 dBi 110.1-205KHz The mounting of the antenna is fixed to the radio module and no other antenna should be used. Company name:

Address:

City:

ZIP / Postal code:

Country:

Place:

Shenzhen USV Technology Co.,Ltd 4th to the south, building B20, Hengfeng Industrial City, Hangchen, Bao'an District, Shenzhen City, Guangdong Province China 518100 Shenzhen City, Guangdong Province 518100 China Date: 3/18/2022 Signature:

version01