FCC ID: 2AY5D-CW120 Magnetic wireless charger

CW120 Smart magnetic wireless charger Thank you for choosing our digital products.This product is a smart magnetic wireless charger that allows you to easily experience the fun of magnetic alignment wireless charging. Please read the instruction carefully before using this product and save it for future use. Product List Magnetic Charger *1 User Manual *1 3. Do not use a mobile phone protective shell with metal back or a mobile phone protective shell with a thickness greater than 4mm;

4. The receiving coil of a mobile phone that supports wireless charging is generally located at the center of the mobile phone.Please place the center of the mobile phone at the center of the charging board to get a better charging experience;

5. Do not put metal debris or magnetic cards on the charging board, which may cause metalhair, magnetic card damage, charger damage or other abnormalities;

6. If the receiving coil or the transmitting board is overheated and the charging stops during the use, please remove the charging device, After waiting to cool down, and try charging again. Product parameter Safety notice Input voltage:(compatible with QC/AFC/PD protocol) 5V/2A-9V/2.22A Output power:(automatic mobile phone adaptation):

5W-7.5W-10W-15W Output current:1A-1.67A Output voltage:5-9V 7.5W maximum efficiency:76%

Charging distance:5mm Charging method:

Magnetic alignment, electromagnetic induction Working frequency:110-205KHZ Precautions 1. Please use a qualified PD protocol or QC protocol power charger, otherwise it may cause unstable charging or abnormal flicker;

2. If you need to use a protective case for your iPhone12/

13/14 during the charging, please use one with Magsafe;

1. Do not pull the power cord violently to avoid the power cord from breaking or falling off. 2. Do not disassemble CW120 by yourself or throw it into Dre or water to avoid short circuit and electric leakage. 3. Do not use CW120 in severe high temperature, humidity or corrosive environment to avoid electric leakage caused by circuit damage. Thank you for purchasing our CW120 wireless charger. In order to ensure you get reliable after-sales service, please read the following warranty instructions carefully. Warranty scope This product fails to work normally or malfunctions during normal use, and once our company confirmed,then can enjoy the companys after-sales service commitment. Thank you for choosing us FCC STATEMENT :

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2)this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Radiation Exposure Statement This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of thedevicemust be respected.

Shenzhen USV Technology Co.,Ltd 4F, Building B20, Hengfeng Industrial City, Hangchen, Bao'an District, Shenzhen City, Guangdong Province China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-4-7 To whom it may concern:

We, Shenzhen USV Technology Co.,Ltd , hereby certify that the equipment for which authorization is sought (FCC ID: 2AYSD -CW120) is not covered equipment prohit authorization pursuant to 2.903 of the FCC rules. ted from receiving an equipment We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (hitos://www foc. gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the apy under 2.914(b) and (4)(5) and (6). tion requirements listed Sincerely, pag Ror Signature Peng Ren General Manager Shenzhen USV Technology Co.,Ltd The information provided inthis eter is based on the referenced rle parts of Title 47 of the CFR as well as KDB. 986446 DOI.

Shenzhen USV Technology Co.,Ltd Add: 4F, Building B20, Hengfeng Industrial City, Hangchen, Bao'an District, Shenzhen City, Guangdong Province China Date: 2023-4-7 FCC ID: 2AYSD -CW120 Dear Sir/Madam, We, Shenzhen USV Technology Co.,Ltd Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model:

Product name: Magnetic wireless charger Model no. CW120, A6 Sincerely, Name/Title: Peng Ren /General Manager Company: Shenzhen USV Technology Co.,Ltd Address: 4F, Building B20, Hengfeng Industrial City, Hangchen, Bao'an District, Shenzhen City, Guangdong Province China Phone: 0755-23020440 Fax: 0755-23020440 E-Mail: [email protected]

Sincerely, Name/Title Peng Ren /General Manager Company:

Address:

Shenzhen USV Technology Co.,Ltd 4F, Building B20, Hengfeng Industrial City, Hangchen, Bao'an District, Shenzhen City, Guangdong Province China 0755-23020440 0755-23020440 [email protected] Phone:

Fax:

E-Mail:

Shenzhen USV Technology Co.,Ltd 4F, Building B20, Hengfeng Industrial City, Hangchen, Bao'an District, Shenzhen City, Guangdong Province China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-4-7 To whom it may concern:

We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behaffin all matters relating to applications for equipment authorization FCC ID: 2AY5D -CW120 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins current valid General Terms and Conditions

(AGB),Testing and Certification Regulations (PZO) which can be viewed on following website wwweurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 Sincerely, Name/Title: Peng Ren /General Manager Company: Shenzhen USV Technology Co,Ltd Address: 4F, Building B20, Hengfeng Industrial City, Hangchen, Bao'an District, Shenzhen City, Guangdong Province China Phone: 0755-23020440 Fax: 0755-23020440 E-Mail: [email protected]

ent_2.911(d)(7)-U, V02 Fel

[model] US_A 48_ Shenzhen USV Technology Co.,Ltd 4F, Building B20, Hengfeng Industrial City, Hangchen, Bao'an District, Shenzhen City, Guangdong Province, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-04-04 U.S. Agent Designation Shenzhen USV Technology Co.,Ltd acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2AYSD-CW120):

Name and company of U.S. agent: Wilson Tech Service LLC Physical U.S. address of agent: 1312 17th Street Suite 692, Denver, CO, 80202, US FRN of U.S. agent: 0033402033 Email address of U.S. agent: [email protected] Wilson Tech Service LLC acknowledges their obligation to accept service of process on behalf of Shenzhen USV Technology Co.,Ltd Shenzhen USV Technology Co.,Ltd accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). Sincerely, For and on behalf of pang pen Wilson Tech Service);LL Signature nena Applicant Name: Peng Ren Signature Title: Manager U.S. Name: Wilson Cheung Applicant Company: Shenzhen USV Title: Manager Technology Co.,Ltd U.S. Company: Wilson Tech Service LLC The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 DOI.