FCC ID: 2A42YVK-12S-PRO Face Access Control Camera

Face TeiperatureDetection and Recognition Terminal Zhenx i ang T echno I ogy processing Operating Android 7. 1 system Touch Optional touch screen screen fifi G WiFI 2. 4 8 Model 02.11 b/g/n Ethernet 10/100 M Netting Supplement Infrared and LED lights Ne twok yLight Card reading Accessories module

(reserved)

!module Network module 4G module

(optional) IC/ID card reader, ID card reader QR code reader, thermal imaging temperature detection Wigan Can suppotWigan input and Wigan output, support Wigan Interface 26 d34 potocoladaptation interface USB Host 2. 0 1 USB OTG USB OTG 1 one Machne interface int eface Serial pot One RS232 interface, one WG input, one WG output 232 Reset Interface key Side hole, external Audio 1 line out Road POE Support POE Power Supply (Selection) Temp er a tur e measuement module 1ermal imaging hermalimaging 0.33 gingso-120 cm I magngpixels :3232 temperature measurement, deviation offline 2 W local face bank Local usage Face Support for simultaneous detection d tackingof 5 detection individuals Function 1: N face recogni tio Support 1/100, 000 error rate , 99% pass rate Support optional swipe card module, ID card module can achieve 1: 1 face comparison n 1: 1 Stange Suppot 3 FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

C5266091_X10_Ed.2 Shenzhen Vikylin Technology Co.,Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date:

2022.03.03 Subject: Request for Confidentiality FCC ID: 2A42YVK-12S-PRO To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No No No NOTE 1 NOTE 1 No No Short-Term Confidentiality NOTE 2 No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of _____ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, 1/1 C5266091_X10_Ed.2 Signature:

Name: Ming Tang Title: Manager 1/1

C5266091_X8_Ed.1 Letter of Authorization Company: Shenzhen Vikylin Technology Co.,Ltd. Address: Room 403, No. 4, ShangHenglang Second Industrial Zone, Huaxing Road, Tongsheng Community, Dalang Street, Longhua District, Shenzhen, China Product Name: Face Access Control Camera Model Number: VK-12S-PRO FCC Identifier: 2A42YVK-12S-PRO We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Ming Tang Title: Manager Signature of applicant:

Date: 2022.03.03 1/1