FCC ID: 2AP2H-FC2 Smart Floodlight Camera

Model No.: FC2 Smart Floodlight Camera User Manual 1. PIR TF 200 8,10 PIR 10 TF ,TF 128G 2. 110V240V 802.11 b/g/n 2.4GHzWi-Fi 1080P

/3.0mm@F2.4/155 10 T-Flash(128GB) PIR10 95dB LED 2*LED4000-4500K2*800LM 3. 4. 1 2 110V~240V 3 5. App Store, Eye4 http://www.vstarcam.cn 6. Android/iOS""

7. APP APP+

30 APP WIFI WiFi 10 APP+

APP WIFI WiFi WiFi eye4

*******

3 APP 10 A P P 888888

******

WIFI APP+

APP 10

******

15 UID UID 8. APP "" 4

:

SD

(SD) 32 1

,24 22:00-06:30 Reset 10 888888

: WIFI

: 2.4G 802.11b/g/n WIFI 1) WIFI 16

@ , WIFI 2) APP

:

:

FC2:

FC2:

FC215 FC215

:

:

(1)

(1)

(2)

(2)

:

:

:aB

:aB FC215 FC215

:

:

/

/

FC2:

FC2:

(FC2)

(FC2) 20 20 1. Product Layout Mic Lens Indicator IR LED Light PIR sensor Reset button TF card slot Mic:
Captures the environmental sound and
fullls two-

way audio

Lens:
1080P HD video Indicator: Indicates working status IR LED Light:
8pcs SMT IR led
lights, IR distance 10m PIR sensor:
Human body motion detector Reset button: Press and hold for 10s to restore factory

default TF card slot:
Supports TF card up to 128GB 2. Technical Specications Power Supply: 110V240V Network Connection: 802.11 b/g/n Wi-Fi @2.4GHz only Audio: Two-way audio with noise cancellation Video: 1080P Lens/FOV: 3.0mm @F2.4/150 diagonal Night Vision: Dual lters, auto switch, 8pcs SMT IR led lights, IR distance 10m Storage: Supports TF card up to 128GB,Supports real-

time recording, schedule recording and motion detection recording. Alarm Detection: Supports motion detection, PIR detection coverage 10m Siren: 95dB LED source: 2 groups of white LED (4000-4500K), Lumen:

2*800LM 3. Indicator Instructions Indicator LED ON Flash slow Flash fast LED OFF Status of the oodlight camera Start to work Wait to be congured Network conguration Conguration completed 4.Installation Step 1: Cut power off For safety, please shut power off at the breaker before installation. Step 2: Installation Please refer to the picture below, pass the two power supply wires (110v-240v) and the ground wire through the mounting bracket, and then use the screws to x the mounting bracket on the junction box Use wire nuts to connect power supply wires Use screws to x the oodlight camera on the mounting bracket Wire nuts Bracket Screws Mounting Bracket Junction Box(not include) Camera Screws Fix the screws for the ground wire Step 3: Restore Power Turn on the power at the breaker 5.
APP Download Scan below QR code to download the APP. Search "Eye4" in APP store, Google Play or other mobile phone application store. Visithttp://www.vstarcam.comto download the APP. 6. Register

Choose "Faster Register", then enter your account and password to sign in. 7. Adding Devices After sign in the APP, please click "+" in the top right corner, there are two ways to add it, "Scan QR code" and

"Others". Note:

try "Others" method to add the device. 7.1
Scan QR Code Please power on the oodlight camera, waiting about 30 seconds until the reboot of oodlight camera is nished, then it will send voice prompt for WiFi conguration. If "Scan QR code" adding method failed, please

(If there is no voice prompt, please reset the oodlight camera by pressing the reset button about 10 seconds. If reset successfully, it will prompt "reset completed, will restart the device. ") Scan QR code Sign in the APP, please click "+" in the top right corner to add the device. Click "Scan to add", please scan the QR code on the body of device. (If you could not nd the QR code, please click

"Others" to add the device. ) Others Once heard the prompt "Please use APP for WiFi conguration", please click "There is voice prompt". For the rst time, please select the WiFi that your mobile phone connected and enter the password, then click "OK" to next step. Wireless Installation WiFi eye4

*******

ok There is voice prompt During the conguration, please keep your cellphone and oodlight camera within 3 meters, at the same time, please adjust the sound to the maximum. Click "send"

button on the APP, to send the conguration signal to the oodlight camera. A f t e r t h e o o d l i g h t c a m e r a p r o m p t s " W i F i conguration success", please wait about 10 seconds, it will show the page "Add it", please enter the initial password: 888888, click "Add it". Name:Floodlight Cam Password: ******

ADD IT Note:

During the process, if it prompted that WiFi conguration success but the binding page does not pop up, please return to home page, select "Others""Floodlight Cam""Search in LAN" or "Manually add" to bind the oodlight camera. 7.2
Others If you could not nd the QR code on the body of device, please click "Others" to add the device. Sign in the APP, click "+" on the top right corner, select

"Others""Floodlight Cam". Select wireless installation, please refer to "wireless installation instruction" and APP voice prompt to nish the setting.

Note:

7.1 "Scan QR Code" to nish the wireless installation settings. steps in the last chapter Please refer to the Others Add Device Wireless Installation Floodlight Cam Note:

During the process,
if it prompted that WiFi conguration success but the binding page does not pop up, please return to home page, select "Others""Floodlight Cam""Search in LAN"

or "Manually add" to bind the oodlight camera. Add Device Add Device Search in LAN 7.3 Search in LAN Click "Search in LAN", you can nd all the available cameras that share the same router with your mobile phone. If added successfully, the oodlight camera could be added through this way by other users which in different account. Note:

If oodlight camera which has been added successfully in this account, will not be searched again. Click "There is voice prompt", wait about 10 seconds, the binding page will pop up, please enter the initial password, click "Add it". Name:Floodlight Cam Password: ******

ADD IT There is voice prompt There is voice promt 7.4 Manually Add Click "Manually add", please enter the 15 digits UID that can be nd on the label stick to the oodlight camera's body. Or you could scan the QR code on the label, the UID will be lled in automatically, then enter the initial password:

888888, click "Add it". Camera Setting:

8.
Settings In the home page of the APPclick the on the top right corner, go to "Parameter Settings", you will get the following menus:

Click the icon to switch the page:

You can see the camera's basic information,modify the name of the oodlight camera, set up wireless connection, modify password, upgrade rmware, adjust the brightness of the LED light, adjust the volume of the camera and turn on the light sensor mode. White light brightness: Adjust the value of the brightness of the LED light Photosensitive mode: If photosensitive mode is enabled, the oodlight camera will record the video when human body is detected and the LED lights will be automatically turned on when weak light detected. set up night vision mode, horizontal and vertical mirror view,adjust light mode, brightness and contrast. Video Viewing:

Micro SD Card Recording:

check micro SD card capacity, set schedule recording, motion detection recording and select recording sound or not(suggest you to format the micro SD card before recording to micro SD card). turn on/off the motion detection alarm, turn on/off ash light and siren, set up the alarm notication type, and alarm time frame. The sensitivity of motion detection alarm was graded into three levels "low/middle/high". Alarm:

FAQ Q: How to reset the oodlight camera to factory default setting?

A: Press and hold the reset button for about 10 seconds to reset the oodlight camera. Its default password: 888888 (To improve the security, it is highly recommended to modify the initial password). Q: Any tips for WiFi connection?

A : The oodlight camera supports only 2.4G frequency signaland 802.11b/g/n WiFi network. 1). The WiFi password should be less than 16 digits, and can not contain special characters, such as @ $ etc. , suggest you to make a password that contains only letters and number. 2). Please upgrade the APP to the latest version. Q : No vision at night time A: Check if the IR function is enabled or not;

Check if the IR LED is on or not;

Reset the camera back to factory setting;

Upgrade the camera to the latest rmware. QWhat to do if cameras picture is blurred?

A : Login the camera's web interface, adjust the picture quality to HD mode;

Motion detection alarm instructions:

Human detection alarm: Switch among ON""OFF""Timing"

Motion detection sensitivity:

"Low" means the oodlight camera will sound an alarm when continuously detects the objects for thrice;

"Middle" means the oodlight camera will sound an alarm when continuously detects the objects for twice;

"High" means the oodlight camera will sound an alarm when continuously detects the objects for once. Add Schedule: click "Add Schedule" to select time period and date for human detection and alarm timing setting Flash light: When it's enabled, the oodlight camera will ash the light once PIR motion detection is triggered;

Siren: When it's enabled, the oodlight camera will sound the alarm once PIR motion detection is triggered. Alarm Alarm Notification Type Client Notification Type Client The setting works for all cameras The setting works for all cameras Motion detection alarm ON Motion detection alarm Timing scheme Motion detection sensitivity Motion detection sensitivity Low Middle High Low Middle High Flash light Siren Add Schedule If no schedule is added, the default is 24 hour s 22:00-06:30 Mon Tues Wed Thur Fri Flash light Siren FC2 STATEMENT :

This device complies with Part 15 of the FC2 Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FC2 Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.