Instruction manual Instruction for use Instruction for use Please put the earphones into the charging box, fully charge them before first use. If the earphones cannot pair each other:
Take earphones out from the charging case, and long press both MFB for 3 seconds until red light on to power off the earphones.Then,long press both MFB simultaneously for 8 seconds to reboot the earphones.
(Voice prompt:PTP Pairing) Power display INPUT 5V 2A USB Input port OUTPUT 5V 2.1A USB Output port TWS earphones Using The earphones can be automatically power on and paired when they are taken out of the charging box . At this time, activate the mobile phone Bluetooth to search #T08P#
Automatic connection The earphones will automatically connect to the last paired device when reboot. It may need to connect manually if the earphones haven't been used for a long time. Automatic power off Pairing time out of 5 minutes, it will power off automatically. Single earphone using The earphone can be automatically power on when it is taken out of the charging box. At this time, activate the mobile phone Bluetooth to search #T08P#. Notes:
Turn the earphones on and off manually When you turn off the earphones manually by pressing the MFB button 3 seconds and see the red light is on for 2 seconds, then you can long press the MFB button for about 2 seconds to power on the earphones again, and activate the mobile phone Bluetooth search #T08P#. Earbud's Indicator MFB For the first time use Insulation Glue When the earphones are manufactured, we will put insulation glue on the two contact points of the earphones to avoid power consumption during transportation. For the first time use, please remove the insulation glue and put it into the charging box. When you take out the earphones from charging box again, the earphones will turn on automatically. Then you can search the pairing name "T08P" on the phone to connect. Function Function Play/Pause Power on Power off Single tap MFB Long press MFB for appr.2s Pause the music, then long press MFB for 3 seconds Answer/End a call Single tap MFB Reject a call Long press MFB for 2s Previous Next Volume down Volume up Double tap L's MFB Double tap R's MFB Long press L's MFB Long press R's MFB Charging Technische spezifikationen Attention When the earphone prompt"battery low" please put the earphones into the charging box to charge. When the charging box run out of battery, please use the standard charger to charge it. Charge for the earphones:
Red light on when charging, blue light on for 5 seconds when fully charged, then the light turns off. Charging time:appr.1.5H Charge for the charging box:
When charging, the charging case displays its power by percentage at the ime. When fully charged, it displays "100"
BT Version BT Profile V5.0 HSP/HFP/A2DP/AVRCP/AVDTP/AVCTP/GAVDP/
SPP/GATT Frequency Range 2.402-2.480GHz Transmission Range About 33ft/10m barrier-free Battery type Music Time Talking Time Standby Time Earphones:50mAh*2 Charging box:10000mAh About 4-4.5H (60% volume) About 4-4.5H About 100H The earphone comes with built-in non-removable,rechargeable Li-ion battery,please dont try to remove the battery from the earphones to avoid danger and damage. Please keep or use it under normal temperature. Do not throw it away casually or put it into fire to avoid danger. Do not disassemble,repair or modify it by yourself. Do not use harsh chemicals or strong detergents to clean he earphone. Do not use the earphone during a thunderstorm.It may cause the its irregular work and increase the risk of electric shock . This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference
(2)This device must accept any interference received, including interference that may cause undesired operation. Wake up voice assistant Triple tap MFB Charging time:appr.6H Notes:
Before charging,it is best to turn off the earphone for safety. Make sure the earphone is fully charged before first using. Make sure every charging is fully charged, since repeated undercharging of the If the earphone has not been used for a long time,please recharge it before using. earphone will cause the degradation of the battery performance. FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.