FCC ID: Q8W-BT117 Bluetooth Speaker

Package Includes 1 xSpeaker 1x Micro-USB Cable 1 xAUX Cable (3.5mm) 1x User Manual Overvivew of Speaker Power-on/off Play/Pause Volume down / Previous track Volume up/ Next track Bluetooth Indicator Reset key USB Type-C Port AUX-In TF card slot USB-Out port Charging 1.Before first time use,fully charge the built-in battery. 2.Connect the USB Type-C Cable (included) between the DC IN port on the speaker,and a USB Type-C Port on a computer or USB AC Adapter. LED Indicator

Solid Red Red light off Battery Status Low battery(<10%) Under Charging Full charged Turn On / Off LED Indicator Long press the play/pause button Note: When the battery charge <3%the speaker will power off automatically. Power On Press button until hear a rising tone and LED indicator light on. Power Off Press button until hear a descending tone and LED indicator light off. BIuetooth connection Make sure that the speaker is within 10 meters from your mobile device, 1.Press button until hear a rising tone and LED indicator fast blinking blue. 2.Go to the Bluetooth settings on your mobile device, search and select BT117 from the list. 3.Once paired, the LED indicator turns solid blue. Note:

When power on, the speaker automatically reconnects to the last mobile device it was connected to. (The speaker can memorize maximum of 8 paired devices ). The speaker will automatically shut down after 10 minutes in pairing mode if no devices are paired for power saving. Music Control Play/Pause Volume UP Volume Down Next track Previous track Click Click Click Press and Hold Press and Hold Speakerphone(in Bluetooth Connection) Answer an incoming callClick Reject an incoming callPress and Hold End the current callClick Bluetooth Disconnection Press buttons simultaneously until LED Indicator fast blinking blue to disconnect the current connected device, and go into new Bluetooth-paring mode. Bluetooth Speaker BT117 TWS (True Wireless Stereo) Function TheTWS technology enables you to use two speakers pairing via Bluetooth to create a wireless dual-channel system to deliver true stereo sound effect. TWS connection operation 1.Place the two speakers near each other (the distance should not be over 10 meters). 2.Power on the two speakers, double click the button on one speaker as MASTER speaker (playback left channel ), the LED indicator fast blinking blue and green, then the two speaker will pair to each other automatically (The other speaker will be as SLAVE speaker and playback right channel) 3.Once paired, the MASTER speaker LED indicator slow flash blue. Listening music from external audio source 1.Power on the speaker. 2.Using the AUX Cable(3.5mm),connect your external device to AUX-in port on speaker. 3.It will automatically turn to AUX-in mode,the LED Indicator turns solid green. Note: Under AUX-IN mode,skip songs and speakerphone function are not workable. IPX5 Water-Resistant Feature This Speaker is IPX5 Water-Resistant for rainfall, spills, or water jets,but do NOT submerge it in water or liquids. IMPORTANT Note - To ensure the speaker is prepared to use for water-resistant,remove all the cable connections and close the port protection cover tightly. Disconnect the TWS connection Press , button on one of the speaker simultaneously until LED Indicator fast blinking blue to disconnect the TWS connection. Reset the speaker: If the function buttons without working,disconnect the charging cable, place a small pin(<3mm)into the reset key and hold it for 2 seconds until the LED light off. Bluetooth Version: 5.0 Suport:A2DPV1.2,AVRCPV1.4,HPV1.6,HSPV1.2 Wireless work distance:10 meters Driver Unit: 66mm (4,15W) Frequency response: 80Hz-16kHz Signal-to-noise ratio: >75dB Battery type: Lithium-ion (3.7V/1800mAh) DC input voltage/current: MICRO USB DC 5V/0.5A - 2A Playtime: 2.2-9 hours (varies by volume level and content) Battery charge time: 2.5 hours Dimensions: 124x90x90 mm Weight: 605g Caution Keep the speaker and its accessories away from the reach of kids as they might cause a choking hazard. Keep the speaker away from fire,water,liquids,extreme heat,and strong magnetic fields. Do NOT use this speaker at high volume for extended periods,as this may cause permanent hearing damage or loss. Do NOT drop or knock the speaker on hard surfaces. Do NOT use chemicals or detergents to clean the speaker. Do NOT scrape the surface with sharp objects. Do NOT make unauthorized alterations to this product. Troubleshooting Cannot Power On Charge the speaker and make sure it has enough battery. Cannot connect with the device Please check the following:

The Bluetooth device supports A2DP profile The Speaker is within 10m from the device. The Speaker is in pairing mode, the LED indicator blinking blue and red. No Sound Make sure the music volume is at audible level on both your device and speaker. Make sure your device is successfully paired with the speaker, the LED indicator turn solid blue. Poor sound quality Move the device closer to this Speaker or remove any obstacle between them. FCC compliance statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

SHENZHEN WEIKING TECHNOLOGY CO.,LTD No.142 ZhangGe Road, ZhangGe Community, FuCheng Street, LongHua District, Shenzhen, GuangDong, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-6-9 To whom it may concer:

We, SHENZHEN WEIKING TECHNOLOGY CO.,LTD, hereby certify that the equipment for which authorization is sought (FCC ID: Q8W-BT117) is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (httos://www foc. gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(b) and (d)(5) and (6). Sincerely, Signature Li Guicai General Manager SHENZHEN WEIKING TECHNOLOGY CO.,LTD The information provided inthis eter is based on the referenced rle parts of Tile 47 of the CFR as well as KDB 986446 DOI.

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2023-6-9>

Pursuant to Paragraphs 0.457 and 0.459 of the Commission's Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

BT117 Model name For the product stated above, we request that the following information be held confidential;

Long-Term Exhibits Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days Extemal Photos Internal Photos. Block Diagram Schematics Test Setup Photos:

User's Manual Parts List Tune Up moOooARRoo Operational Descriptions:

Dopooo0ol The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Li Guicai/General Manager SHENZHEN WEIKING TECHNOLOGY CO.,LTD No.142 ZhangGe Road, ZhangGe Community, FuCheng Street, LongHua District, Shenzhen, GuangDong, China Phone: 86-755-33869869 Fax: 86-755-36815032 E-Mail: sales10@weiking.cn

SHENZHEN WEIKING TECHNOLOGY CO.,LTD No.142 ZhangGe Road, ZhangGe Community, FuCheng Street, LongHua District, Shenzhen, GuangDong, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-6-9 To whom it may concer:

We, the undersigned, hereby authorize Eurofins Product Service GmbH to act.on our behaffin all matters relating to applications for equipment authorization FCC ID: Q8W-BT117 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins current valid General Terms and Conditions

(AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title: Li Guicai/General Manager Company: SHENZHEN WEIKING TECHNOLOGY CO.,LTD Address: No.142 ZhangGe Road, ZhangGe Community, FuCheng Street, LongHua District, Shenzhen, GuangDong, China Phone: 86-755-33869869 Fax: 86-755-36815032 E-Mail: sales10@weiking.cn

SHENZHEN WEIKING TECHNOLOGY CO.,LTD U.S. Agent Designation for Service of Process

(Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTENTION: FCC Certification Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Baihetian Innovative Solutions FRN: 0033401605 Contact Name: Kenneth Young Street Address: 6837 Chase Rd City/Province/Zip: Dearborn, MI 48126 Telephone No: 313-395-3113 Email: ken.young@baihetiansolutions.com This letter is to confirm that we (the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature:

Date: June 8, 2023 Signed by (Printed Name/Title): Kenneth Young/Manager The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: SHENZHEN WEIKING TECHNOLOGY CO.,LTD Grantee Code: Q8W FCC ID: Q8W-BT117 Contact Name: Li Guicai Street Address: No.142 ZhangGe Road, ZhangGe Community, FuCheng Street, LongHua District, City/Province/Zip: Shenzhen, GuangDong, China Telephone No: + 86-755-33869869 Email: sales10@weiking.cn Applicant Signature:

Date: 2023.06.08 Signed by (Printed Name/Title): Li Guicai/General Manager