FCC ID: 2A9PP-2888 Soundbar

er Manual Spec Model Name Driver Size Power Output Bluetooth Version BT Range Total Harmonic Distortion SNR(AB) Dimensions of soundbar(mm) Dimensions of subwoofer(mm) Impedence(ohm) S28CS 2.25" *2+5"x1 sow 53 Up to 10m

<1%

>=80dB W570 x H78 x D68 W150 x H241 x DI70 49 DESCRIPTION OF THE SOUNDBAR BACK COVER 1. AUX-IN 2. HDMICARC)Input 3 Power Input:110-240V-50/60HZ 4. SUB OUTPUT DESCRIPTION OF THE SOUNDBAR CONTROL PANEL 7 1. Power/input Button: Press and hold to power the Caution:

To reduce the risk of electric shock, do not dismantle the S28CS and do not expose the apparatus to rain or moisture. This symbol alerts you about the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to. constitute an electric shock to a person or persons.

/\ Important! This symbol alerts you to read and observe important warnings and instructions on the unit or in this manual. IMPORTANT SAFETY INSTI ICTIONS The soundbar should be situated away from heat sources such as radiators, stoves, or other devices, including amplifiers that produce heat. This soundbar should be operated only from the type of power source indicated by the marking adjacent to the power cord entry. Clean the soundbar with only a soft damp cloth and make sure to unplug the unit from the wall socket before starting. If any servicing of the unit is required please do not disassemble the soundbar yourself. All maintenance must be done only by a service provider or from a manufacturer. Doing so on your own will automatically make the warranty null and void. Do not replace any of the part on your own and don't use parts that are not factory authorised. It can result in fires, electrical shocks or other hazards. EEE PASSAU S28CS SOUNDBAR Connectivity Packaging Conten'

1 Soundbar 1 Subwoofer 2x Cable 1 Remote Control 1 User Manual 1 Mount Bracket USB/BT/AUX/HDMI(ARC) unit on off. Short press to switch between Bluetooth/HDMI (ARC)/USB and AUX modes. 2. () button: Short press to play previous audio, press @: =

and hold to decrease the volume. 3. Play/Pause button: In Bluetooth mode, press to play/pause audio. Press and hold to disconnect/re-

connect Bluetooth.In USB mode, press to play/pause. In AUX mode,press to mute/unmute. 4. (+) Button: Press to skip to next track, press and hold toincrease the volume. 5. USB Port

* USB supports upto 64 GB & supports audio codecs: Mp3, WMV and WMA

FA tt ol

This soundbar is specially developed for LED/LCD/Plasma & Smart TVs: It should not be used in combination with CRT TVs(Cathode Ray Tube TVs) in order to avoid image interferences. Do not place this unit close to a strong magnetic field or the unit on an amplifier or receiver. Do not place the S28CS on any unstable surfaces. Don not take the soundbar near water, such as bath tubs, bathrooms e.t.c, and any areas that contain a high amount of moisture. Switch off the device whenever you are not using it, even if this is only for a short while. Please ensure that there is a 20 cm of space free above the soundbar and 5 cm on either side. 1. POWE Turns on standby mode. 2. INPUT: Navigates between BT/HDMI/USB/AUX mode. 3. VOLUME {-,+) :Increase/decrease the volume. Ala: Skip to the previous track(works under USB & BT modes). 5. bbl: Skip to the next track(works under USB & BT modes). 6. Pill: Play/Pause the USB mode. 7. TRE {-,+}: _ Increase/decrease treble. 8. BASS {-,+}: _ Increase/decrease bass. 9. EQ: Choose audio output sound field effect. 10.4x Mute the sound. BATTERY INSTALLATION 1) Open the battery case. 2) Insert 2pcs AAA battery without the polarity reversed. 3) Close the battery case. 4) Keep within 5 meter range, 30 degree angle while aiming at the unit. Precautionary note:

Remove the battery when the unit is not being used for a long period of time WALL MOUNTING The soundbar has two keyhole slots on the rear panel to enable wall mounting, use the clamps and fix it on the soundbar with the help of screws

= Measure 24.41 inches (620mm) and drill 2 parallel holes (1/4 inch each) in the wall

= Firmly apply a dowel into each hole in the wall (dowel only required for solid wall).

= Attach the soundbar to the screws on the wall and press and push the soundbar to the right 1/8 inch each to lock. ca [eres oH eon fin: Clamn fixed on coundhar 1.Power On: Use the Adaptor to connect the sound bar, plug the adaptor into a wall outlet, it will automatically enter into the standby mode and led indicator with white light will be shown on display. 2.Short press the Power key on S28CS the sound level automatically goes upto Level 15, press the standby button again to select Input option:

AUX/BT/HDMI(ARC)/USB 3.Power off: To tum off, press and hold the Power key for 2 seconds or unplug from the wall mount. 1) Make sure the S28CS and your device are next to each other

(within 1 meter /3 feet). 2) When using the $28CS for the first time, turn on the unit, the Indicator will flash white light regularly. Select BT as input source. Now the speaker is in pairing mode. 3) Activate the Bluetooth function on your phone, tablet and search for nearby Bluetooth connections. Find " S28CS " in the search results. Tap on the name to connect. Using the Soundbar :Paring Modes HDMI(ARC): Connect an HDMI (ARC) compatible device to the HDMI(ARC) port on the soundbar using an HDMI cable. Select HDMI(ARC) mode either by repeatedly pressing the standby button to select Input option:

AUX/BT/ HDMI (ARC)/ USB button on your S28CS or from the remote control by repeatedly pressing the Input key. Press the stand by key on the soundbars control panel until ARC is displayed on the LED display. Ensure HDMI ARC is selected as audio output, then adjust the volume of the soundbar using the Volume up and Volume down buttons on the remote control or soundbar's control AUX-in: Connect a compatible device using the 3.5mm jack cable. Select AUX mode either by repeatedly pressing the Input button on the remote control or repeatedly pressing the standby button on the soundbar control panel until nou is displayed on the LED display . Ensure the connected device is producing an audio signal, then adjust the volume of the soundbar using the Volume up and Volume down buttons on the remote control or soundbar control panel. buttons on the remote control or soundbar control panel. Bluetooth: Repeatedly pressing the input button on the remote control or repeatedly pressing the standby button on the soundbar's control panel until BT is displayed on the LED display. The LED display will flash to indicate that the soundbar is in Bluetooth pairing mode. Ensure that the device you wish to connect is also in pairing mode and search for S28CS iin its device list. When the two devices are paired, the LED display on the soundbar will stop flashing and tum solid. (The soundbar will now automatically re-pair with this device whenever it is within range and has Bluetooth turned on.) USB Media Mode: The Soundbar is compatible with USB Flash Drive upto 64 gb & can play Mp3,WMV, WAV audio files directly. Simply insert a compatible drive into the USB port on the rear end of the soundbar and the unit will automatically switch to USB mode and play the first compatible track. If USB Mode is not detected automatically please select the USB option by repeatedly pressing the Standby key on the soundbar and USB mode (also accessed via the remote control via input button). Equalizer modes: The soundbar has 5 equalizer presets, tailored to complement various styles of music. Press the EQ button on the remote to choose between different sound effects. We'd Love to Hear From You!

Warranty 12-month limited warranty(The actual warranty period shall be implemented according to the requirements of local laws and regulations) We want to personally reach out and thank you for purchasing from our Amazon store. Selling an Amazon is what we do to support our familly, and product reviews are the ligeblood of our business. Thank you again for being one of our amazing customers!

Customer Cervice:

cici@miisso.com AC POWER IMPORTANT NOTES

= Make sure the power supply is correct and never handle the power cord or its plug with wet hands when plugging into, or unplugging from an outlet.

= Ensure that the main power switch is in the OFF position beforeconnecting to AC power cord to the power supply to avoid damage to the unit.

= Adamaged power cord can easily cause an electric shock or fire hazard, never use a power cord after it has been damaged. Trouble Shooting Problem No Power Make sure the S28CS plugged in and Turned OW No sound T. Make sure you have seleced Proper Source Mae sur the volume is set properly onthe unit and the correct playback mode-(Bluetooth Android Device and AUX Input) 3._Check that soundbar system isnot set to standby Bluetoath pairing fa Check to see that both device are tured on and your luetoth Device =

discoverable Turn OFF & ON both the device Make sure you have selected the Proper output Mode Make sure you are within the 5 feet of unit Move both the device away from other existing Bluetooth devices, Make sure units not paired toa previously paired device Make sure that all connections are secure Make sure the volume is et properly on the unit and at the television The battery might be dead, replace the batiery No sound when recehing 10 input

"No Remate control operation This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

~- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. FCC ID: 2A9PP-2888 EM-S28CS-083SisB83 Date: 2023.08.02 P/N:

maT: L87.44*W93.68mm;

#4: 80gB4R Te: RS, RAE, RARY: L611.83*W93.68mm

* Pictures are for reference only.

Page 1 of 1 FCC ID: 2A9PP-2888 LABEL AND LOCATION Soundbar Model: S28CS FCC ID: 2A9PP-2888

(Size: L4.0cm x 3.0cm) Label Location Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: webmaster@lcs-cert.com | Web: www.lcs-cert.com Scan code to check authenticity

Shenzhen Weilaishenniao Technology Co., Ltd Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation 8/13/2023 Shenzhen Weilaishenniao Technology Co., Ltd acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2A9PP-2888):

Name of U.S. agent: Tim Payne Company U.S. agent: FCC US Agent, LLC Physical U.S. address of agent: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA FRN of U.S. agent: 0033402884 Email address of U.S. agent: Support@FCCUSAgent.com Phone of U.S. agent: 708-571-3148 FCC US Agent, LLC acknowledges their obligation to accept service of process on behalf of Shenzhen Weilaishenniao Technology Co., Ltd. Shenzhen Weilaishenniao Technology Co., Ltd accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. This acceptance will be in effect till the applicant decides to change the agent of service of process. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). Sincerely, Signature

[Name] Honglin Liu

[Title] Sales Manager

[Company]Shenzhen Weilaishenniao Technology Co., Ltd. Signature Tim Payne Manager FCC US Agent, LLC The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC. 3 0 V

, U

) 7

) d

1 1 9

. 2 _ t n e g A _ S U

l e d o m

_ 8 4

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products:

FCC ID 2A9PP-2888 Model name S28CS, S26R, S28R, S28CS, S28R Lite, S13R, S22R, S23R, S25R, S27R, S29R, S30R, S31R, S32R, S33R, S34R, S221B, S223B, S225B, S226B For the products listed above, we request permanent confidentiality for all applicable exhibits as there are:

the Operational Description the Block Diagram the Schematics The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-08-21 Name / Title: Honglin Liu / Manager Company: Shenzhen Weilaishenniao Technology Co., Ltd Address: ROOM 1301, C BUILDING, ZHUOYUE TIMES SQUARE BAOAN DISTRICT, SHENZHEN CITY, GUANGDONG PROVINCE China Phone: +86-18575502206 Fax: N/A E-Mail: sales3@miisso.com

Covered Equipment Identification Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(ii) of the Commissions Rules (47 C.F.R.) we attest as follows:

We, applicant Company Name: Shenzhen Weilaishenniao Technology Co., Ltd Address:

ROOM 1301, C BUILDING, ZHUOYUE TIMES SQUARE BAOAN DISTRICT, SHENZHEN CITY, GUANGDONG PROVINCE China Phone: +86-18575502206 certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-08-21 Name / Title: Honglin Liu / Manager Company: Shenzhen Weilaishenniao Technology Co., Ltd Address: ROOM 1301, C BUILDING, ZHUOYUE TIMES SQUARE BAOAN DISTRICT, SHENZHEN CITY, GUANGDONG PROVINCE China Phone: +86-18575502206 Fax: N/A E-Mail: sales3@miisso.com

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commissions Rules (47 C.F.R.) we attest as follows for the product listed below:

FCC ID 2A9PP-2888 We, applicant Model name S28CS, S26R, S28R, S28CS, S28R Lite, S13R, S22R, S23R, S25R, S27R, S29R, S30R, S31R, S32R, S33R, S34R, S221B, S223B, S225B, S226B Company Name: Shenzhen Weilaishenniao Technology Co., Ltd Address:

ROOM 1301, C BUILDING, ZHUOYUE TIMES SQUARE BAOAN DISTRICT, SHENZHEN CITY, GUANGDONG PROVINCE China Phone: +86-18575502206 certify that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-08-21 Name / Title: Honglin Liu / Manager Company: Shenzhen Weilaishenniao Technology Co., Ltd Address: ROOM 1301, C BUILDING, ZHUOYUE TIMES SQUARE BAOAN DISTRICT, SHENZHEN CITY, GUANGDONG PROVINCE China Phone: +86-18575502206 Fax: N/A E-Mail: sales3@miisso.com

Shenzhen Weilaishenniao Technology Co., Ltd ROOM 1301, C BUILDING, ZHUOYUE TIMES SQUARE BAOAN DISTRICT, SHENZHEN CITY, GUANGDONG PROVINCE, China Date: August 21, 2023 FCC ID: 2A9PP-2888 Model Number: S28CS, S26R, S28R, S28CS, S28R Lite, S13R, S22R, S23R, S25R, S27R, S29R, S30R, S31R, S32R, S33R, S34R, S221B, S223B, S225B, S226B To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, Shenzhen Weilaishenniao Technology Co., Ltd hereby declare that our product

(Soundbar) Model Number: S28CS, S26R, S28R, S28CS, S28R Lite, S13R, S22R, S23R, S25R, S27R, S29R, S30R, S31R, S32R, S33R, S34R, S221B, S223B, S225B, S226B board, Schematic, Hardware version, Software version, structure and internal photos are same, named differently due to marketing purposes. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely,

(Signed) Name/Title: Honglin Liu / Manager Company: Shenzhen Weilaishenniao Technology Co., Ltd Address: ROOM 1301, C BUILDING, ZHUOYUE TIMES SQUARE BAOAN DISTRICT, SHENZHEN CITY, GUANGDONG PROVINCE, China Tel: +86-18575502206 Fax: N/A E-Mail: sales3@miisso.com