FCC ID: 2AU8V-SQSL10A1 Wireless Qi Charger

Product Introduction This is a smart charging product that supports 5W, 10W standard wireless charging. The product structure is detachable and can be used as a desktop and ve rtical type of wireless charging. Product Outline Power input LED Light Instructions 1. Use USB cable connect with 5V/9V power adapter 2. Blue LED light 3 times, then turn off 3. When it is charging device, the blue LED is breathing light. 4. After full charging, the LED will always light on. 5. It can be into flat position when you put the holder to backside. Anormal LED status: RED LED fast flashing This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the i nterference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

Shenzhen Wentong Electronic Co.,Ltd. To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Regarding: Confidentiality Request regarding application for FCC ID: 2AU8V-SQSL10A1 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission's rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public, Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY ( Remark : S07 FETS RSME, 45,900 M180K , HGNREMARTORE ES LR. ) Additionally, the applicant requests the following documents be held confidential until the device is marketed or 0 days from the grant date, whichever is less. If the device is marketed within 0 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. Delete any document that is NOT included in your application External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Kathy wang Title: manager Signature: ky On behalf of Company: Shenzhen Wentong Electronic Co.,Ltd. Telephone: 0755-23153639 E-mail: Kathy.wang@szwt88.com

j i b Shenzhen Wentong Electronic Co.,Ltd. Date: 2019-12-2 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AU8V-SQSL10A1 To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Joyce Shi in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, | acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Shenzhen Wentong Electronic Co.,Ltd. This authorization is valid until further written notice from the applicant. Sincerely, Print Name: Kathy wang Title: manager Signature:

On behalf of Comp4ny: Shenzhen Wentong Electronic Co.,Ltd. Telephone: 0755-23153639 E-mail: Kathy. wang@szwt88.com

Shenzhen Wentong Electronic Co.,Ltd. Cover Letter for WPT RF Exposure Evaluation Consideration Date: 2019-12-2 Dear Examiner, Theres a WPT device as below we'd like to be authorized per KDB 680106 DO1. Grantee Name: Shenzhen Wentong Electronic Co.,Ltd. Product Name: Wireless Qi Charger Model Number: FRTO2, SQSL 10 Al (FF334278 & FF340256) FCC ID: 2AU8V-SQSL10A1 As addressed in KDB 680106 DO1 RF Exposure Wireless Charging App vO3section 5, Inductive wireless power transfer applications with supporting field strength results and meeting all of the 6 following requirements are not required to submit a KDB inquiry for a PAG for equipment approved using certification to address RF exposure compliance. Here is a briefing about the device. KDB 680106 DO1 Section 5 Requirements Justification a) Power transfer frequency is less that 1 MHz Yes. 0.11058-0.14776MHz b) Output power from each primary coil is less than or equal | Yes. to 15 watts. 10 watts Max. c) The transfer system includes only single primary and Yes. secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils. d) Client device is placed directly in contact with the Yes. transmitter. e) Application is limited to Mobile exposure conditions only. | Yes. f) The aggregate H-field strengths at 15 cm surrounding the Yes. device and 20 cm above the top surface from all Please refer to RF exposure simultaneous transmitting coils are demonstrated to be less | report. than 50% of the MPE limit. Sincerely, Print Name: Kathy wang Title: manager Signature: bw On behalf of Company: Shenzhen Wentong Electronic Co.,Ltd. Telephone: 0755-23153639 E-mail: Kathy.wang@szwt88.com pees reir, Es) we

[ela F.