V20 A
( a), LRLR b
( a) ( b)
//(
P10 5 A;
B C D 5 Siri Ios 2 siri (
ios siri
/
P10 1 TWS TWS 2 TWS 3 TWS
/
2
: ()3 , (-); ()3 , (+)
(
/ 3 5 1. 2. 3.30 1. DC5V/1A USB USB 2. LED LED LED 0-30% 30-60%
60-99% LED DC5V/1A PC USB USB V5.0 10M A2DP/AVRCP/HFP/HSP 2402MHz~2480MHz 6MM*2 Hi-Fi Speaker 16 3
:
70H 3-5 2.5 45MAH 2 3500MAH 2.5 IOS/Android/Windows CE/FCC/ROHS 3.7V 1. 2. 3.0 45 4. 5. Q A:
Q:
A QP10 A Q A Q: ?
A: , , ,
, . Q: ?
A: 3 .
, IOS8.0 & Android4.3 V20 A Instruction Manual Product Indication Wearing sketches Choose the suitable ear-pad from three sizes (small, medium, large) to make you more comfortable. Wearing instructions Please wear the earphone marked "L" on the left ear and the one marked "R" on the right ear. Tip: Insert earphones with your ear-pads into your ear canal, then turn the earphones to a firm and comfortable position.
(see figure b) Functional operation First use instructions:
When using it for the first time (or not using it for a long time), please make sure to charge the earphones and charging box before use. Get quick started:
1) Take the L/R earphones out from the charging box and the L/R earphones will power on and connect to each other automatically. 2) After successful connection, the blue & white light of the master earphone (left earphone) will blink alternately and it voices connected, left channel, pairing as well. While the right earphone will be white light blinking slowly and it voices connected, right channel. 3) Turn on the mobile phone search bluetooth device P10, then click connect and it voices second device connected in the master earphone (left earphone). P10 Power off:
There are two ways to power off the earphones --
1) Put the earphones into the charging box , they will power off automatically and enter into charging mode. 2) Disconnect the bluetooth connection between your mobile phone and the earphones, the earphones will power off automatically after about 5 minutes. Indicator light status:
A. White indicator flashes three times-Power onBlue indicator flashes three times-Power off. B. Indicator light off - Not connected. C. Blue and White indicator flashes alternately- Two earphones connected and waiting connection with mobile phone. D. White indicator flashes slowly every 5 seconds- Connected with mobile phone. IOS/siri Active:
long touch the either of earphone for 2 seconds to activate Siri, Siri will be ready to take commands after a sound Siri played through. (This function is only supported for IOS system devices). Use earphones again:
Take the L/R earphones out of the charging box and the L/R earphones will power on and connect to each other automatically. Then they will connect the bluetooth device automatically. (The last connected bluetooth device.) Use a single earphone:
Only take out any one earphone, the White light of this one will flash soon. Then double click it, the indicator is changed to blue & white light flickering. While turn on the cellphone, search the bluetooth P10 and connect. Left and right earphone can be used separately. Tips: 1) If the master earphone (left earphone) is being used as single earphone and want to change TWS mode, you only need to pick up the other earphone from the charging box. These two earphone will connect each other automatically. 2) If the slave earphone(right earphone) is being used as single earphone and want to change TWS mode, you need pick up the other earphone, touch it for 3 seconds and then release. This earphone will power on and will automatically connect with the master (left earphone). After the connection is successful, the master earphone will have the voice prompt second device connected, left channel and the slave earphone voice prompt right channel. Functional operation:
Phone ring tone and sound can be heard from Both earphones. Answer the phone: when calls come in, single-click either of earphones. (Sounds can be heard from both earphones.) Hang up the phone: during the call, single-click either of earphones. Reject a call: when calls come in, long touch the either of earphones for 2 seconds. Music play: In playing music, double-click the master earphone (left earphone) for previous track; double-click the slave earphone (right earphone) for next track; single-click the either of earphones for pause or play music. Decrease the volume(-): Long touch the master earphone (left earphone) over 3 seconds to turn the volume down. Increase the volume(+): Long touch the slave earphone (right earphone) over 3 seconds to turn the volume up. TipsPlease make reasonable volume and time, it will damage your hearing if it is continuous long time and high volume. Reset: (right / left earphones pair) If two earphones cannot be connected each other or they cannot connect to the mobile phone bluetooth due to mis-operation, you can reset the earphones as the following method. Put the earphones into the charging box and enter into the charging mode, triple-click the earphone touch control at the same time, until the blue lights flash twice. (You can do this one by one. ) Then take the both earphones out of the charging box and long touch the earphones for 5 seconds at the same time, until the earphones Blue and white light flashes alternative then release. They will enter into paring mode automatically. After successfully connection, turn on the mobile phone bluetooth and connect. Earphone charging:
1. Put two earphones into the charging box, cover the lid and the they will enter into charging mode after several seconds. 2. blue indicators will flash slowly in charging mode. 3. Charging is completed: after the earphones are full power, the blue light will go out automatically, and the charging box will automatically cut off after 30 seconds. Charging box battery charging 1. Please power the charging case by DC5V/1A adapter, PC USB port of PC or other DC5V is OK. 2. In the charging mode, three blue LED indicator lights on the case show the battery capacity. Battery capacity indicator A. One blue indicator flashes is 0%-30%
B. One indicator stays blue and one blue indicator flashes is 30%-60%
C. Three indicators stay blue is 60%-100%. Please disconnect charging devices from the charging case once fully charged. Note: please charge for the case with DC5V/1A charger or Computer USB; As the charging and discharging of the earphones increases, the battery performance will decrease, which is normal for all rechargeable batteries. (Dont press the contact of the spring pin hard to avoid improper use.) Power bank function:
The charging box can be as power bank for your mobile phone. Charge your Android or IOS device by connecting the Micro USB cable to the charge port of your device and the standard USB connector of the charging box.
(TipsPlease check the indicator of the charging box before charge to the mobile phone. When all 3 indicators are lighting, the charging box can be better charged for the mobile phone. ) Specification:
Bluetooth version V5.0 Support profile A2DP/AVRCP/HFP/HSP Transmission distance 10M Frequency range Driver Impedance Voltage Standby time Talking time Playing time 2402MHz~2480MHz 6MM*2 Hi-Fi Speaker 16 3.7V 70H 3-5H 2.5H Earphone battery 45MAH Earphone charging time 2H Charging box battery 3500MAH Charging box charging time About 2.5H Support system Certification Attention:
IOS/Android/Windows CE/FCC/ROHS 1. Do not remove or refit earphones for any reason, otherwise it will lead to headset damaged and burn. These are not covered by warranty. 2. Do not touch the earphones in corrosive liquid, otherwise it will cause serious damage. The manufacturer will not guarantee the damage caused under this situation. 3. Do not put the equipment under too high or too low temperature( Below 0C or above 40C). 4. Please avoid approaching the eyes of children or animals when using equipment lights. 5. Do not use equipment in the thunderstorm weather. Thunderstorms may cause abnormal equipment operation and increase the risk of electric shock. Warning:
This product contains a built-in lithium battery. Please do not expose this product to strong sunlight, roasting or throwing it into the fire, as they may explode FAQ Q: Charging case can not charge?
A: Ensure that the charging cable is properly connected to the charging port or replace charging cable Q: Signal is not stable or left earphone is out of voice?
A: Try to wear the earphones well, and put the mobile on front pocket when used in outdoor. Q: When search the bluetooth, display two connection names of P10?
A: Forget the two bluetooth name of P10, turn off the bluetooth and connect as above get quick start. Q: The sound volume is down or not clear when making calls?
A: Try to turn the earphone volume up or turn the mobile phone volume up, and move phone closer to the earphones. Q: How to connect two cellphones to an earphone?
A: Connect your first mobile phone to bluetooth and then turn off bluetooth , then connect second mobile phone. Finally, turn on the first mobile phone bluetooth and connect it again. Q: How far is the distance between the left earphone and the right one?
A: 3M in the normal environment without barrier. For better sound quality experience, suggest use IOS 8.0/ Android 4.3 or above operation system. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.