FCC ID: 2A6KK-S60 2.0 CH Soundbar Speaker System

Lets get started. MODEL:S60 Important Safety Instructions 1. Read these Instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings.Install inaccordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators,heat registers,stoves,or other apparatus(includingampliers)that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug.A polarized plug has two blades with one wider than the other.A grounding type plughas two blades and a third grounding prong.The wideblade or the third prong are provided for your safety.When the provided plug does not t into your outlet,consult an electrician for replacement of the obsoleteoutlet. 10.Protect the power cord from being walked on or pinched particularly at plugs,convenience receptacles,and the point where they exit from the apparatus. 11.Only use attachments/accessories specied by the manufacturer. 12.Unplug this apparatus during lightning storms or when unused for long periods of time. 13.Refer all servicing to qualied service personnel.Servicing is required when the apparatus has been damaged in any way, such as power-supply cord orplug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally,or has been dropped. SPECIAL NOTE:

When placing your unit on a lacquered or natural nish,protect your furniture with a cloth or other protective material. FCC WARNING Warning : Changes or modications to this unit not expresslyapproved by the party responsible for compliance could void theuser's authority to operate the equipment. This device complies with part 15 of the FCC Rules.Operation issubject to the following two conditions:(1)This device may not causeharmful interference,and(2)this device must accept any interferencereceived,including interference that may cause undesired operation. NOTE:This equipment has been tested and found to comply withthe limits for a Class B digital device,pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation.This equipment generates,uses,and can radiate radio frequency energyand,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not occur in a particularinstallation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turningthe equipment off and on,the user is encouraged to try to correct theinterference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the cquipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an ancontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& yourbody. Additional Warnings The apparatus shall not be exposed to dripping or splashing and that no objects lled with liquids, such as vases, shall be placed on apparatus. Lappareil ne doit pas tre expos aux coulements ou aux claboussures at aucun objet ne contenant de liquide, tel quun vase, ne doit tre plac sur lobjet. Battery shall not be exposed to excessive heat such as sunshine, re or the light. Les piles ne doivent pas tre exposes de forte chaleur, tel qu la lumire du soleil, au feu ou autres choses de semblable. Caution marking is located at the rear or bottom of the apparatus. Attention marquage est situ sur le paneau arrire ou infrieur de lunit. The marking information is located at the rear of bottom of apparatus. Le marquage est situ sur le paneau arrire ou infrieur de lunit. This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. 1 What's in the box Make sure you read all the safety information before you use this product. Sound Bar Main Unit Aduio cable(3.5mm to 3.5mm) Digital Optical cable Lets get started. VOL-

MODE VOL+

MUSIC NEWS MOVIE MODEL:S60 Power adapter Users guide Remote control 2A Overview Soundbar main unit and how to use it LED Digital Display LED digital display: when turn on, display function (BT/OPT/USB/AUX) POWER KEY Long Press to ON/OFF Short Press to Pause/Play Remote Control Sensor MODE KEY Short press to change input mode

(USB, OPTICAL, AUX,BT) VOLUME KEY On optical and AUX mode short press to adjust the volume;on BT and USB mode, short press to select the previous/next music le, long press to adjust the volume 2b Overview Sound Bar Main Unit AUX IN connect to the analog (AUX or RCA) output of an external device. USB IN only for connecting a USB ash drive to play MP3 music through the Soundbar. OPTICAL (Digital Audio IN) Digital Audio IN (optical): connect to the digital (optical) output of an external device. DC IN DC IN (Power Supply in), connect the supplied AC/DC power adapter. 2C Soundbar LED Display The LED display on the Sound Bar gives you information about the status of the Sound Bar. Sound Bar status LED Indications In standby mode In optical mode In BT mode In USB mode In AUX mode LED no display OPt bLUE USb LINE 3A Using the Remote 1 2 3 4 5 6 7 8 9 10 11 VOL-

MODE VOL+

MUSIC NEWS MOVIE 3b Install or replace the remote batteries Battery Type:CR2032 (supplied) 1 2 3 4 5 6 7 8 9 10 11 Soundbar Turns on/off Short press the button to pause and play a music under BT/USB mode; long press to reset BT Skip to previous track in BT/USB mode Select the input modes Short Press the buttons to decrease volume News Mode Music Mode Mute or resume the sound Skip to next track in BT/USB mode Short Press the buttons to increase volume Movie Mode Insert the coin cell battery with the "+" facing up 4

Button cells and battery compartments 3 Remove the transparent insulating lm 1 2 Pull out the battery compartment Press the fastener in the direction Insert the battery into the battery compartment

5 4 Connect to your TV There are 2 ways to connect your sound bar to the TV (listed in order that we recommend):Optical(refer to 4A), and AUX (refer to 4b) 4A Optical Step 1, Turn off the sound bar and TV, then connect the sound bar to the TV through the optical cable( need to remove the protective cap of the optical cable when connection). Step 2, Turn on the sound bar, press the mode on the sound bar remote, select OPT on the LED display Step 3, Turn on the TV, press the home

(or menu) on the TV remote, go to TV settingaudio (sound)TV speaker--select external speaker (turn off TV speaker),save the setting, then back to audio (sound setting)---select expert setting---digital audio output (or optical) ---select PCM (some TV called SPDIF or optical), Save the setting. Step 4, Play TV show to test the sound bar. TV OPTICAL Kindly note:

For optical connection ,please change TV audio output to PCM (or SPDIF and optical) and external speaker, otherwise you will get cracking noise or no sound. Important: the TV default audio output is the analog signal and the internal speaker, But please note the optical cable is the digital signal, need to change your TV audio output to a digital optical/PCM signal and external speaker, otherwise the soundbar will output cracking noise sound, pop sound, static sound, or no sound. Here are several suggestions for most TVs to set OPTICAL(Activate PCM and external speakers only):

Samsung TV 1,SettingSoundSound OutputTurn o TV Speaker or select External Speakers 2,SettingSoundExpert SettingDigital Output Audio FormatPCM Vizio TV 1,SettingAudioTV SpeakersOFF 2,SettingAudioDigital Audio OutPCM Sony TV 1,Setting Display&Sounds Audio Output Speakers Audio System 2,Setting Display&Sounds Audio Output Digital Audio OutPCM 3,Setting Display&Sounds Audio Output Pass Through Mode OFF LG TV 1,All Setting Sound TV SpeakersOFF or select External Speakers 2,All Setting Sound Advance Settings Digital Sound Output PCM TCL Roku TV 1,SettingAudioAudio OutAuto 2,SettingAudioDigital Audio FormatSelect Stereo TCL TV (Powered by android) 1,TV SettingAudioTV SpeakersOFF or select External Speakers 2,TV SettingAudioAdvance SettingDigital Audio OutSelect PCM 3,TV SettingSystemT-LinkSelect ON Hisense Roku TV 1,SettingAudio TV Speakers Select Disabled 2,SettingAudioDigital Audio OutSelect Stereo ONN Roku TV 1,SettingAudio TV Speakers Select Disabled 2,SettingAudioDigital Audio FormatSelect Stereo Hisense TV(Powered by android) 1,TV SettingSoundSpeakersSelect OFF or select External Speakers 2,TV SettingSoundAdvance SettingDigital Audio OutSelect PCM Sharp TV 1,TV SettingSoundAdvance Audio SettingDigital Audio OutSelect PCM 2,TV SettingSoundAdvance Audio SettingTV SpeakersSelect OFF or select External Speakers Sharp TV(Powered by android) 1,Setting Devices Preferences Sound Digital Output Select PCM 2,Setting Devices Preferences Sound Speakers Select External Audio System Insignia Fire TV & Toshiba Fire TV 1,TV SettingsDisplay & Sounds Audio OutputTV speakers Select OFF 2,TV SettingsDisplay & Sounds Audio OutputDigital Audio FormatSelect PCM Panasonic TV 1,Menu Audio Settings Advance Audio TV speakers Select OFF 2,Menu Audio SettingsAdvance Audio Digital Audio OutSelect PCM Roku TV Stick 1,SettingAudioDigital Output FormatSelect Stereo 2,SettingAudioAudio ModeSelect Stereo Fire TV Stick 1,SettingsDisplay & SoundsAudio Surround Sound PCM Kindly Note: TV settings may differ according to TV models difference, if the listed method can not work, or your TV is not listed, please contact us via service mail: support@wogree.com, or contact the TV manufacturer for help, thank you!

4B AUX Here are two ways that you can use the AUX jack to setup a soundbar. 1, use the 3.5mm to 3.5mm cable (supplied) connect the soundbar AUX jack to your TV headphones jack. 2, use the RCA to 3.5mm cable (not supplied) connect the soundbar AUX jack to your TV AUX(L/R, red and white) jack. Please just choose one way to connect, then follow the below instruction to set up the soundbar:

Step 1,choose line in cable(3.5 to 3.5mm)or RCA cable connect the soundbar to your TV. Step 2, Turn on the sound bar, press the mode on the sound bar remote, select AUX on LED display. Step 3, Turn on the TV, press the home

(or menu) on the TV remote, go to TV settingaudio(sound)TV speaker--select external speaker(turn on TV speaker), save the setting.( For some TVs, please back to audio(sound)select analog outputselect the Variable,save the setting). Step 4, Play TV show to test the sound bar. TV Headphone RCA audio RCA cable (not supplied) 3.5mm to 3.5mm cable (supplied) 5 USB Connect your USB drive to the USB jack on the Soundbar. Press mode on the soundbar remote, select USB on the LED display. Kindly Note: only for USB ash drive to play MP3 music and update rmware, can not compatible with other usb devices. USB Flash Driver 6 Pair with your BT device The initial connection 1. Press mode on the soundbar remote, select BT on the LED display. 2. Turn on BT on the BT device. (see the devices manual for more information) 3. Select WOGREE S60 from the device BT list, connect it. When your BT device is connected, the LED will stop ash. 4. Play music les from the connected device via BT, throught the Soundbar. The soundbar only support one BT device at a time. If your device requests a password, enters the default 0000. BT Device 7 Troubleshooting No Sound 1: Please check if the soundbar is consistent with the input mode of sound source by following the manual 2: Press the Volume+ button on the remote or soundbar to volume up 3: Please check the output devices if the output of sound source is working Please make sure all the soundbar ports are input ports and all the connected devices are audio output. No Sound when TV is connected with optical 1: Set up the optical output 2: Set up the audio output format--PCM 3: Adjust to optical mode, and the LED will show OPT 4: Please check if the optical is connected with TV effectively 5: Volume up the soundbar Devices cant connect with BT 1: Adjust to BT mode, and the LED will show the BT 2: Reboot the cellphone or BT devices, search again 3: Please make sure the soundbar is disconnected with other BT devices, shut off and try again. 4: Please check if there is strong interfering signal around, such as: WIFI, 2.4G; Try to use in other space. 5: Please try to use other BT devices to test if the BT device has problem of its own. Please take out the transparent antidust caps on two sides of optical. One side of optical indicates the white lightning when TV is connected well, and then plug the other side of optical into the optical port of soundbar. The BT is only connected with one device, other devices cant search it when it has connected. BT connection is unstable 1: Please check if there is strong interfering signal around, such as: WIFI, 2.4G; Try to use in other space. 2: Reboot the cellphone or BT devices, then reconnect 3: Please make sure there is no obstacle between the soundbar and BT device in case of blocking the signal. 4: Power off the soundbar and then reboot. Please make sure there is no signal interference around the product. The remote is not working 1: Please check if the positive and negative of battery is right.

(There is noted on the batterys compartment) 2: Please check if the receiving location is blocked under the LED on soundbar. 3: The working distance of remote is 6-8m (empty space) 1: Please make sure if the volume of output device is high. 2: Please try to play with other devices to test if the working device has problem of its own. 3: The product is designed for home, it would be much better if the space is moderate. The location of sound bar can affect your experience in some extent. Please set up and shut off the sound of TV Check the TVs manual. This soundbar dont support Dolby and DTS, please disable the Dolly and DTS, if you do not know how to set, please contact the APP support The sound is low or bad The sound is inconsistent with the sound of TV Cracking sound or poping sound when play video from Amazon Prime Video, Youtube, HBO, Netix or other streaming video APPs 8 Important Notes About Service Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. 9 Specications Sound Bar Inputs 2 Full-band speakers One 3.5mm, One USB, BT (Wireless), One Optical Frequency Response (System) 50 Hz to 16 Khz Compliances Place of Origin FCC China Thanks for reading!

For more information, please feel free to contact us:

Web: www.wogree.com Email: support@wogree.com NOTE: One year warranty, 45 days money back guarantee, lifetime technical support, 100% satisfaction service, please feel free to contact us for any questions. L184W134MM 157

COLOR:pantone1925u

SHENZHEN WOPET SMART TECHNOLOGY CO., LTD Agent Authorization Company: SHENZHEN WOPET SMART TECHNOLOGY CO., LTD Address: 923, Baoyuan Huafeng Headquarters Economic Building A, Xixiang, Baoan District, Shenzhen, Guangdong,China Product Name: 2.0 CH Soundbar Speaker System Model Number(s): S60 Product Description: 2.0 CH Soundbar Speaker System We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2022/10/25 Name:

Sherry Zeng Title:

General Manager Company: SHENZHEN WOPET SMART TECHNOLOGY CO., LTD

SHENZHEN WOPET SMART TECHNOLOGY CO., LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2A6KK-S60 Date: 2022/10/25 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Sherry Zeng Title: General Manager