FCC ID: 2A6KK-FW70 Automatic Pet Feeder

Castle Wifi Automatic Pet Feeder Model: FW70&FW70 plus USER MANUAL

[CONTENTS]

Product Specification Structure Interface Specification Buttons Indicator Lights Assembly Guidelines Take out the accessories Machine Installation Barrel installation Food bowl installation Top cover installation Power connection Clean the turnplate Install the turntable APP Usage Instructions APP Operation Method Wi-Fi connection Connection Mode AP mode connection Feeding Setting Device Removal FAQs FCC Warnings Have a Question For the Seller Warranty Information 1 2 3 4 5 6 6 7 8 8 9 10 11 12 13 14 14 15 18 20 21 22 24 26 27 Product Specifications Model FW70 FW70PLUS Capacity 3L 5L Meals 10 meals per day 10 meals per day Screen LED screen LED screen One portion 12 grams(12 portions at most per meal) 12 grams(12 portions at most per meal) Food size 2- 15mm(dry food only) 2- 15mm(dry food only) Pet size Battery-

powered supply Small/medium-sized dogs and cats Small/medium-sized dogs and cats 3 alkaline D batteries

(not included) 3 alkaline D batteries

(not included) DC-powered supply 5V/1A 5V/1A Operating temperature

Dementions 18.6x18.6x 28.6cm/

7.327.3211.25in 18.6x18.6x 33.5cm/

7.327.3213.18in Product weight 1.5kg/3.3lb 1.6kg/3.6lb 1 Structure 1.Knob 2.Lid 3.Food tank

5.Button 6.Link stopper 7.Muddler 8.Turnplate 9.Rotating vane 10.Feeder base 11.Control panel 12.Anti-Clog Detector 13.Food bowl 2 Interface Specifications Buzzer WIFI Indicator Status Indicator Lock Indicator Setting Recording Unlock/

Manual feeding 3 Buttons Button Description Function Instructions Unlock/

Manual Feed Hold for 2 seconds to unlock/lock Click to feed one portion

(in unlock state) Record Setting When unlocked, continuously hold for 1 second until you hear a "beep"

sound to start recording, release the button when you hear two "beep"

sounds to finish recording (supports up to 10 seconds In the unlocked state, press and hold the "Settings" button for 5 seconds until you hear a beep. The green light will start flashing, indicating that the device will be restored to factory Settings. 4 Indicator Lights Iocation Name Status

network

WiFi indicator Status indicator Lock indicator 5 Assembly Guidelines 1 Take out the accessories

the food bowl, adapter, power cord, and other accessories.

6 2 Machine installation Install the desiccant (For better preservation, it is recommended to replace the desiccant every 15 days). knob Rotate the switch counterclockwise to remove the top cover. Desiccant Press inward the desiccant cap to open it, and install the desiccant. 7 3 Barrel installation Align the top cover button with the slot in the machine body and press downward. The Food tank Buttons Buttons 4 Food bowl installation Align the food bowl with the slot in the base and press inward until the bottom of the food bowl is level with the base. Bowl Base 8 5 Top cover installation First, adjust the switch to the unlock position. The open position Align the protrusion on the top cover with the slot in the barrel and install downward. The Notch Position Rotate the switch clockwise to the locked position. The Lock Position 9 6 Power connection Supports dual power supply. To avoid power outage affecting machine operation, it is recommended to also install batteries in the machine. Battery cover Open the battery cover at the bottom, install 3 D batteries. Type-c Power Cord Insert the Type-C power cord as shown in the picture, clip the cord into the slot to prevent it from coming loose. 10 7 Clean the turnplate Press the link stopper to remove it from the slot. Link stopper Rotate the turntable counter-clockwise. Turnplate Lift the turntable upward to remove it. 11 8 Install the turntable As shown in the picture, align the turntable with the unlock position on the machine body and install downward. Turnplate Fuselage position Feeder base Rotate the turntable clockwise to the locked position, press the link stopper into the slot. Slot 12 APP Usage Instructions

WOpet Life in GOOGLE PLAY

WOpet Life in APPLE STORE

13 APP Operation Method

WOpet Life" APP, register with an email and activate the account. Note: You can set a 6-20 character password, which must contain at least one letter and one number. Wi-Fi connection Note:

To ensure normal WiFi connection and signal stability, please keep the device within 6 meters/19.7 ft of the router, without walls or other objects obstructing it. Network pairing is only supported in power supply mode, and APP operations are not supported in battery power mode. Warning: 5G WiFi 5150-5250MHz for indoor use only 14 1Connection Mode

(Note: Check if the mobile phone's is on before connecting.) 1.1. Click "Set Up Device" as shown in figure (1). 1.2. Select the model "Castle FW70&FW70 plus" as shown in figure (2).

(1)

(2) 1.3. Plug in the power, confirm that the Wi-Fi indicator light is flashing green, as shown in figure (3).

(Note: if the WiFi indicator light is not flashing green, long press the unlock button for 2 seconds to unlock, long press the setting button for 5 seconds to reset, the Wi-Fi indicator light will flash green quickly.) 15 1.4. Confirm that the top right corner. 1.5. Enter the Wi-Fi account and password, as shown in figure (4). 1.6. The connection process is as shown in figure (5). 1.7. You can set the machine name as shown in figure (6). 1.8. Successful connection as shown in figure (7).

(3)

(4)

(5) 16

(6)

(7) Continue to add devices Click the "+" in the upper right corner as shown in figures (8) and

(9), you can continue to add devices following the aforementioned method. 17

(8)

(9)

2.1. Click "Set Up Device" as shown in figure (10). 2.2. Select "Wi-Fi" mode at the top right corner, confirm that the WIFI indicator light is flashing green quickly, long press for 5 seconds until the Wi-Fi indicator light flashes green slowly, then click confirm, as shown in figure (11). 2.3. Enter the Wi-Fi account and password, as shown in figure (12).

(10)

(11)

(12)

figure (13). 2.5. Enter the mobile phone's Wi-Fi connection interface, select

18 2.6. Return to the APP interface, the connection process is as shown in figures (15). 2.7. Change the device name as shown in figure (16). 2.8. Complete the device connection, as shown in figure (17). SL-WOpet-xxxx

(13)

(15) 19

(16)

(17)

3.1. Manual Feeding the feeding settings, click on "Extra Snack" to select the number of portions (each portion 12g), click "Confirm" to complete the manual feeding, as shown in figures (18), (19), and (20).

(18)

(19)

(20) 3.2. Set Feeding Plan feeding plan, click on "Add a meal", enter "Time, Label, Food quantity" parameter settings, as shown in figures (21), (22), and (23). 20

(21)

(22)

(23)

figure (26). 21

(25)

(26) FAQs Q: The feeder cannot connect to Wi-Fi

1. Check if the machine is powered correctly. 2. Check if the account and password are correct, and enter the correct account and password (composed of letters, numbers, symbols, etc., 8~16 digits). 3. Check if the feeder is powered by batteries. APP operation is not supported when it is powered by batteries.

5. Reset the feeder. Q: The feeder shows offline

1. Keep the feeder within close range to the router (within 6m/

19.7ft), without walls or other objects causing a weak signal. 2. Reset the feeder. Q: The operation buttons on the panel do not work

button for 2 seconds to unlock, the machine can be operated. Q: The APP operation does not dispense food properly

1. Check if the power supply is normal, and if the battery power is sufficient when powered by batteries (indicated by the red light). 2. Check if the food bowl is overfilled. If the working indicator light is flashing red slowly, you need to clean the food bowl. 22 3. Check if the feed bin is empty. If the working indicator light is flashing red quickly, you need to refill it.

constantly red, remove and clean the rotor to solve the jam. 5. Check if the food size is too large, causing a blockage. The feeder supports dry food with a diameter of 2-15mm/0.08-

0.6inch. Q: The amount of food dispensed is not the same:

less. This is normal. After the third portion, the same amount will be dispensed. Any more questions, please email our support team:

23 FCC Warnings Changes or modifications to this unit not expressly approved. Non-compliance could void the user's authority to operate the equipment. Notes:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. 24 This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communi-

cations. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of

Reorient or relocate the receiving antenna. Increase the distance between the equipment and receiver. Connect the equipment into an outlet on a different circuit from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.Shielded interface cables must be used with the equipment in order to comply with the limits for a digital device pursuant to Sub part B of Part 15 of FCC Rules. Specifications and designs are subject to change without any notice or obligation on the part of the manufacturer. 25 Have a Question For the Seller 1.Find your order 2.Click View order details Home Your Orders Your Order Product link Buy Again Buy it again Your Wish List Write a product review Your Account View order details Shop by Department 3.Click the Seller name 4.Click Ask a question View order details Order#

Order Total Shipped Product link

Have a question for the seller?

Ask a question 26 Gifted parts,replacements,consumable products are not covered by the 2-year warranty Manufactures warranties may not apply in all cases,de-

pending on factors such as use of the product,where the product was purchased,or who you purchase the product from. Please review the warranty cafefully,and contact the manufacture if you have any questions. Warranty Information If you have any problems when using our products, please

support@wopet.com

QR code to finish the registration form on our official website within 30 days after you received the items. 27 FCC warning statements:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. IC warning statements:

-English Warning Statement:

RSS-GEN ISSUE 5, 8.4 User manual notice This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).

-French Warning Statement:

RSS - Gen version 5, 8.4 avis du manuel de l'utilisateur Cet appareil contient un metteur / rcepteur sans licence conforme au RSS sans licence d'innovation, science et dveloppement conomique Canada.L'opration doit satisfaire aux deux conditions suivantes:

Cet quipement peut ne pas causer d'interfrence. L'quipement doit accepter toute interfrence, y compris toute interfrence qui pourrait entraner un fonctionnement indsirable de l'quipement. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that are deemed to comply without testing of specifc absorption ratio (SAR).Cet quipement est conforme aux limites dexposition aux rayonnements nonces pour un environnement non contrl et respecte les rgles dexposition aux frquences radiolectriques (RF) CNR-102 de lIC. Cet quipement met une nergie RF trs faible qui est considre conforme sans valuation du dbit dabsorption spcifque

(DAS). This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Lors de l'installation et du fonctionnement de cet quipement, la distance minimale entre le radiateur et le corps doit tre de 20 cm.

SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. Section 2.911(d)(5)(i) Certification Equipment Type Company name: SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. Address: ROOM 923, BLOCK A, ECONOMIC BUILDING, HUAFENG, HEADQUARTERS NO. 288, XIXIANG AVENUE, LAODONG COMMUNITY, XIXIANG STREET, BAOAN DISTRICT, SHENZHEN CHINA Product Name: Automatic Pet Feeder FCC ID: 2A6KK-FW70 Model(s): FW70PLUS, FW70 2.911(d)(5)(i) Equipment Type We, SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered List NOTE 1 Yours sincerely, Name:

Sherry zeng Date: 8/14/2023 Title:

Company name: SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. General Manager NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. Section 2.911(d)(5)(ii) Certification Applicant (Covered List ) Company name: SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. Address: ROOM 923, BLOCK A, ECONOMIC BUILDING, HUAFENG, HEADQUARTERS NO. 288, XIXIANG AVENUE, LAODONG COMMUNITY, XIXIANG STREET, BAOAN DISTRICT, SHENZHEN CHINA Product Name: Automatic Pet Feeder FCC ID: 2A6KK-FW70 Model(s): FW70PLUS, FW70 2.911(d)(5)(ii) Applicant filing We, [SHENZHEN WOPET SMART TECHNOLOGY CO., LTD.] certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the Covered List NOTE 2, established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name:

Sherry zeng Date: 8/14/2023 Title:

Company name: SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. General Manager NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.3

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6751621.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. U.S. Agent Designation for Service of Process -

Certification Attestation Letter 8/14/2023 ATTN.: Reviewing Engineer FCC ID: 2A6KK-FW70 Per section 2.911(d)(7) of the FCC rules, SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. (the applicant) certifies that the equipment for which authorization is sought is designated to the following U.S. agent* for service of process:

Company Name: JOC Australia Inc Physical U.S. Company Address: 18351 Colima Road Ste 585 Rowland Heights, California, 91748 United States of America Agent contact name/Title : Benjamin. Smith/Vice President Agent Email Address: sales@jocinc.org/calvinsui001@gmail.com Tel No.: +1(626) 217 4778 FRN No.: 0033379421 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed:

Agent Signed (if different to Applicant):

Signed:

Printed name: Sherry zeng Title: General Manger Company Name: SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. Signed:

Printed name: Benjamin. Smith Title: Vice President Date: 8/14/2023 Date: 8/14/2023 Company Name: JOC Australia Inc

* the applicant must designate a contact located in the United States for purposes of acting as the applicants agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process.

SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. Authorization Company name: SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. Address: ROOM 923, BLOCK A, ECONOMIC BUILDING, HUAFENG, HEADQUARTERS NO. 288, XIXIANG AVENUE, LAODONG COMMUNITY, XIXIANG STREET, BAOAN DISTRICT, SHENZHEN CHINA Product Name: Automatic Pet Feeder FCC ID: 2A6KK-FW70 Model(s): FW70PLUS, FW70 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

August 14, 2023 Name Position Company Name Address Tel Fax Email Sherry zeng General Manager SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. ROOM 923, BLOCK A, ECONOMIC BUILDING, HUAFENG, HEADQUARTERS NO. 288, XIXIANG AVENUE, LAODONG COMMUNITY, XIXIANG STREET, BAOAN DISTRICT, SHENZHEN CHINA

+86-15115879531

3002926779@qq.com

SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. Difference Description We SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. state:

Product name: Automatic Pet Feeder Model: FW70PLUS, FW70 All models the function, software and electric circuit are the same. the model name is different. Except for the appearance color and size. Signature:

August 14, 2023 Name Position Sherry zeng General Manager Company Name SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. Address ROOM 923, BLOCK A, ECONOMIC BUILDING, HUAFENG, HEADQUARTERS NO. 288, XIXIANG AVENUE, LAODONG COMMUNITY, XIXIANG STREET, BAOAN DISTRICT, SHENZHEN CHINA Tel Fax Email

+86-15115879531

3002926779@qq.com

SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. FCC Software Configuration Control Declaration Date: August 14, 2023 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: Automatic Pet Feeder/FW70PLUS, FW70 FCC ID: 2A6KK-FW70 Regarding FCC Country Code Selection guidelines identified in KDB 594280. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Signature:

August 14, 2023 Name Position Company Name Address Tel Fax Email Sherry zeng General Manager SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. ROOM 923, BLOCK A, ECONOMIC BUILDING, HUAFENG, HEADQUARTERS NO. 288, XIXIANG AVENUE, LAODONG COMMUNITY, XIXIANG STREET, BAOAN DISTRICT, SHENZHEN CHINA

+86-15115879531

3002926779@qq.com FCC Software Configuration Control Declaration Rev1.1.docx

SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. Letter of Authorization Company: SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. Address: ROOM 923, BLOCK A, ECONOMIC BUILDING, HUAFENG, HEADQUARTERS NO. 288, XIXIANG AVENUE, LAODONG COMMUNITY, XIXIANG STREET, BAOAN DISTRICT, SHENZHEN CHINA Product Name: Automatic Pet Feeder Model Number(s): FW70PLUS, FW70 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

August 14, 2023 Name Position Company Name Address Tel Fax Email Sherry zeng General Manager SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. ROOM 923, BLOCK A, ECONOMIC BUILDING, HUAFENG, HEADQUARTERS NO. 288, XIXIANG AVENUE, LAODONG COMMUNITY, XIXIANG STREET, BAOAN DISTRICT, SHENZHEN CHINA

+86-15115879531

3002926779@qq.com

SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject; Request for Long Term Confidentiality FCC ID: 2A6KK-FW70 Date: 2023-08-14 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram BOM Operational Description Tune-up Procedure SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Signature:

August 14, 2023 Name Position Company Name Address Tel Fax Email Sherry zeng General Manager SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. ROOM 923, BLOCK A, ECONOMIC BUILDING, HUAFENG, HEADQUARTERS NO. 288, XIXIANG AVENUE, LAODONG COMMUNITY, XIXIANG STREET, BAOAN DISTRICT, SHENZHEN CHINA

+86-15115879531

3002926779@qq.com