Manual of Hollywood vanity mirror Please save this manual for future reference LED MIRROR HM-1901 1. Plug 2. USA outlet and USB port (
This product does not support this feature.
) 3. Bluetooth touch button 4. Bluetooth display screen 5. 6. Speaker LED bulb 1 1 I SETTING UP YOUR MIRROR 1. Unpack the mirror carefully. 2. Lay all the parts out ready for assembly. 3. Using a screwdriver attach base to bottom of mirror through pre-drilled holes. 4. Lift mirror carefully into required location and install the bulbs. 5. Your Hollywood Mirror is now ready to use! Enjoy it. Turn on / off light & Brightness control :
II QUICK GUIDE Press this button brightness. to turn on or turn off the light. HOLD DOWN the touch button to increase or decrease Bluetooth connection:
Using your Smartphone search&connect to Smart mirror (The Bluetooth is in the state of automatic search when first plug in), Once connected, the Bluetooth speaker will have a prompt tone. Correct month, date, time, week :
Press the button for about one second, The number on month area will flash on the screen firstly, Then select the button Time, week correction please repeat previous steps or to calibrate the month, finally press the button for confirmation. The Bluetooth mirror doesnt support USB playing at present. More detailed steps, please check III HOW TO USE THE FEATURES 1 III HOW TO USE THE FEATURES?
Parameters of LED mirror :
Audio Frequency Size of screen Speaker Max power Speaker impedance 20Hz-20KHz 4.3 inch 8 W 4 , 3W*2 Touch button
: Light on/off switch, Brightness Touch Control. Press this button to turn on or turn off the light. HOLD DOWN the touch button to increase or decrease brightness.
: Press this button to return to the previous song - Hold down to reduce the volume. The time point will reduce based on numbers during the process of time-setting.
: Press this button to pause or resume playing. when receiving a call, press this button for answer calls. Long press for time set.
: Press this button to skip to the next song Hold down to increase volume. The time point will increase based on numbers during the process of time-setting.
: Press this button to switch between the Bluetooth and USB. Press and hold for about 3 seconds to enter the standby mode. When you turn it on again, you need to press and hold for about 3 seconds. At this time, the 4.3-inch display will light up. 2 How to connect Bluetooth 1. When plug in, the display screen will show HI (as pic 1). After about 2 seconds, the entire Bluetooth screen lights up, which indicates that the device is turn on. Picture 1 2. The Bluetooth is in the state of automatic search when first plug in. At this time, the Bluetooth symbol will always flashing. Using your smartphone , search and connect to Freedah Luxury, Once connected, the Bluetooth speaker will have a prompt tone. Meanwhile, the Bluetooth symbol on the display screen will change from flashing state to light state (as pic 2). Picture 2 3. When smartphone exits Bluetooth connection, the Bluetooth symbol will start flashing again. But when exiting Bluetooth connection by using Bluetooth button gray,
, the Bluetooth symbol on the display will be accompanied by a prompt tone indicating that the Bluetooth connection has been exited. At the same time, it will become USB playing mode (as pic 3). Picture 3 How to correct calendar , time, week?
The time needs to be re-calibrated after the power is on to display the correct Month and calendar with the exact time. Please see the detailed operation process as follows:
Step 1: Correct calendar ----Press the button for about one second, The number on month area will flash on the screen firstly, Then select the button or to calibrate the month, finally press the button 3 for confirmation. At the same time, the number on date area start flashing, and then repeat the operation Step 2: Correct time----When the calendar calibration is confirmed, it will enter the time area for correction. to calibrate the calendar. or Please repeat step 1. Step 3: Correct week----After adjusting the time, the third step is to enter into the area of week. Please repeat step 1. Step 4After the week is corrected, press the button
& week calibration mode will be exited. In this case, the month, week and time displayed on the screen have again for confirmation, and the calendar & time been calibrated. The calendar & time & week can be operated in the state of music playing or un-playing. IV TIPS You can press and hold button the device will automatically exit the time setting mode after 7 seconds. for about 2 seconds to exit the correction state. Or you dont press it, 4 V PROBLEMS RESOLVING 1. Phone cannot search for the Bluetooth Confirm if the Bluetooth is turned on If you cant find the Bluetooth when it has been turned on. Check if other devices are connected to the Bluetooth. Please restart the Bluetooth and mobile phone. 2. Bluetooth and mobile phone are always disconnected or have noise after they are connected. There is some barrier between the mobile phone and Bluetooth or their distance exceeds the scope of the signal, So please do not fully hold the Bluetooth with your hand. In order to maintain the continuous stability of the signal, please try to keep Bluetooth and the phone is in the same direction. Maybe the internal circuit is unstable, please turn off the Bluetooth switch and restart again. 3. How far distance the mobile phone and the Bluetooth mirror can be kept when I use it?
The mobile phone or Bluetooth mirror can work effectively up to 30 feet (10 meters). Generally,Bluetooth connection is the best when no any obstacle between them, the distance beyond the 30 feet (10 meters), you will hear a slight noise during the call, which is a normal situation. FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.