FCC ID: 2BEVG-ASGR29 Wireless remote control

Yard lamp ASGR29 Scope of application Electronic massage products, candle lights, LED lights, solar lights, electronic toys, etc Overall dimension Main size :86MMX0.5mm(L)40MMX 0.5mm(W)X 6mm0.5mm(D) Material:

3.1 surface:0.125mmPVC 3.2 PVC shell material 3.3 BATTERY: CR2025/3V(LITHIUM BATTERY) Control Angle: Effective firing Angle 360 (through the wall) Control distance: The effective distance is greater than or equal to 12 meters Key life test: more than 10,000 times Working indicator: LED(power indicator) Working mode: trigger type Control mode: Fixed code 1 control N/ Rolling code 1 control 1 Remote control technical parameters item unit Test Minimum Standard Maximum condition value value value uA mA M V Mhz dbm Static current Dynamic current Launch distance

(through wall) Operating voltage Modulation mode Frequency range Transmitting powe r Service temperature Relative No key when pressed When the key is pressed 360 frequency 10 transmission 2.7 OAK/ASK 0.5 3 12 3 434 10 0C RH%

-10C 35C 30 3 3 8 15 3.5 60 90 humidity Number of function keys 1 21 21 This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC ID: 2BEVG-ASGR29 3

Shenzhen BANTEK Testing Co., Ltd. Page 1 of 1 Report No.: BTEK240124004AE LABEL AND LOCATION Model No.: ASGR29 FCC ID: 2BEVG-ASGR29

Shenzhen Xinhongju Technology Co., Ltd. Date2024-03-20 Product Model Number: ASGR29 FCC ID2BEVG-ASGR29 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:

Testing Approval applications and procedures We declare that ORGANIZATION. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by ORGANIZATION. on our behalf shall have the same effect as acts of our own. By:

Contact Listed on FCC Wesbite Title: General manager Email: 1120433102@qq.com Telephone: +86 15173508199 On behalf of: Shenzhen Xinhongju Technology Co., Ltd.

Shenzhen Xinhongju Technology Co., Ltd. Room 1302, Longhua Apartment, No. 9, Minging Rd, Longhua District, Shenzhen Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024/02/19 U.S. Agent Designation Shenzhen Xinhongju Technology Co., Ltd. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought

(FCC ID: 2BEVG-ASGR29):

Name and company of U.S. agent: AOCE Corporation Inc. Physical U.S. address of agent: 6547 N Academy Bivd #2266 Springs, CO 80918 United States FRN of U.S. agent: 0033401381 Email address of U.S. agent: wwbj2008@126.com AOCE Corporation Inc. acknowledges their obligation to accept service of process on behalf of Shenzhen Xinhongju Technology Co., Ltd. Shenzhen Xinhongju Technology Co., Ltd. with the FRN [0034820308 ] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Xingmer Chen : pie Signature Signature angel CHEN Johnson Wang Manager PM Shenzhen Xinhongju Technology Co., Ltd. AOCE Corporation Inc.

Shenzhen Xinhongju Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2BEVG-ASGR29 Date: March 20, 2024 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Xingmei chen Title:General manager

Shenzhen Xinhongju Technology Co., Ltd. Room 1302, Longhua Apartment, No. 9, Minqing Rd, Longhua District, Shenzhen Product Similarity Declaration Date: Mar. 25, 2024 FCC ID: 2BEVG-ASGR29 Model Number: ASGR29, ASGR29-WT, ASGR29-1, ASGR29-2, ASGR29-3, ASGR29-4, ASGR29-5, ASGR29-6, ASHT120-1 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, Shenzhen Xinhongju Technology Co., Ltd. , hereby declare that our product (Yard lamp) Model Number: ASGR29, ASGR29-WT, ASGR29-1, ASGR29-2, ASGR29-3, ASGR29-4, ASGR29-5, ASGR29-6, ASHT120-1 board, Schematic, Hardware version, Software version, structure and internal photos are same, named differently due to marketing purposes. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely,

(Signed) Name: Xingmei Chen / Manager Company: Shenzhen Xinhongju Technology Co., Ltd. Address: Room 1302, Longhua Apartment, No. 9, Minqing Rd, Longhua District, Shenzhen Phone: +86 15173508199 Fax: +86 15173508199 E-Mail: 1120433102@qq.com