m m 2
. 0 m m 0 1 1 69mm0.2mm X-Buds 1.Product Component Name 2.First Time Pairing and Use Open the charging box, wait for 2 seconds, the earbuds automatically enters the pairing mode simultaneously 4 When white light flickered for 10s once of the left and right earbuds, paired with the phone successfully The touch Hole of mic Lights of earbuds Lights of charging box Type-C charger Left Right Specification USER MANUAL Charging box Charger cable When the red and white lights of the left earbud flash alternately, meanwhile, the right earbud lights out and the white lights flash once for 10s, cellphone pairing successfully Matching After The Second Open the charging box and reconnect it automatically Open the cellphone Bluetooth directly and search X-Buds to match and play AT&T 4G 11:14 AM 88%
Settings Buletooth Bluetooth Now discoverable asiphone MY DEVICES X-Buds OTHER DEVICE Not connected Mic switching Mic in a call state, double-click the touch which can switch mobile mic and earbuds mic Low battery indication When in low battery, red light will slow flash every 5s, please recharge in time Clear pairing list When the left and right earphones turn on solely, click 5 times to enter the pairing mode and then click 7 times again , the red light will be on for one second before shutdown Note:Before the operation, make sure there is no connection between the left and right earbuds 4.Charge Red light on Red light went out White light flashing White light on 5.Technical Specification Earphone Bluetooth Specification Bluetooth5.0 Bluetooth Profile A2DP1.3/AVRCP1.6/HSP1.2/HFP1.7 RF Range Talking Time Standby Time 15M 4H 150H Charging Time About 1.5H Battery Type Frequency Response Polymer li-ion battery3.7V/45mah 20HZ-20KHZ Distortion 1%
(20HZ-10KHZ 1mW) Charging Box Charging Times 4 Times Charging time About 2H Battery type Polymer li-ion battery3.7V/500mah 6.Customer Service Support If you need to return or change the goods, please contact customer service :support@xsound.com.cn 7.FAQ 1) Why does an earbud silent?
Ans: Please turn off or clear the pairing list of earbuds and reconnect them. 2) How to use the earbuds separtely?
Ans: The left earbuds can be connected with the BT of the cellphone when it turns on. The right earbuds can be connected with the BT of the cellphone after clicking the touch for five times when the connection is cut off between the left earbuds with the right earbuds. 3) Why does the earphone stuck suddenly?
Ans:Bluetooth signal is vulnerable to electromagnetic interference, which leads to stuck. Warm tips: The left earphone is the main earphone, put the cellphone in the left pocket or hold in the left hand for a more stable connection experience 8.Harmful Substances Hazardous Substance Cd Cr/VI PBB PBDE Component Pb Hg Shell Circuit Board The form is compiled according to SJ/T11364 Indicates that this hazardous substance contained in all homogeneous materials of this part is below the limit requirement in GB/T 26572. Indicates that this hazardous substance contained in at least one of the homogeneous materials of this part is above the limit requirement in GB/T 26572 Ten years environmental protection service life This product meets RoHS environmental protection requirements. it will not affect the health of users under normal use.
(At present, there is no mature technology in the world to replace or reduce lead content in electronic ceramics, optical glass, steel and copper alloys.) 3.Frequently Function Turn on/Power off turn on:
Open the charging box or touch 2s power off:
Turn off the charging box or touch 10s Pairing/Connect earbuds pairing mode:
Open the charging box or touch 2s cellphone connect successfully Open the cellphone and connect it when the white light of the earbud flickered once for 10s Answer/reject calls:
answer In an incoming state, click the touch reject In an incoming state, touch 1s Next Bouble-click the right earbud to change next song Previous Bouble-click the left earbud to change previous song Activate voice assistant In the connection state, triple-click the touch NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation. The left earbud FCC ID:2AALPT6L The right earbud FCC ID:2AALPT6R
/
T6_ T6/69X110mm/5/100g/
T6/69X110mm/5/100g/
ERP 5\100g\
2019-4-23 2019-4-24 2019-5-8 R1.0 R2.0 R3.0 2019-5-21 LOGO 2019-6-13 FCCID IQC [X2] [X1] [X1]
RoHS Reach AZO PROP65 PAHS R3.0/2017