FCC ID: 2AXY5-M16 3-in-1 Foldable Magnetic Wireless Charger

M16 Preface:

Dear customers, thank you for purchasing our products. In order to understand the product further. Please read this manual carefully before use. We wish you a pleasant experience!

1 2 3 Storage Tips:

If you only want to charge your phone or headphones, you can fold up the wireless charger to take up the least amount of space for you and still charge your devices. Specifications 3-in-1 Foldable Magnetic Wireless Charger Input: 9V 2.66A Phone output:10W Max Earphone output 5W Max Watch: 3W Max Input interface: USB-C 4 6 5 7 8 3-in-1 Foldable Magnetic Wireless Charger User Manual 9 1 2 3 4 5 6 Magnetic charging area for Mobile phone Wireless charging area for Apple Watch Phone or earphone charging area Mobile phone charging indicator Apple Watch charging indicator Earphone charging indicator 10 7 8 9 10 11 11 Foldable storage silicone design Foldable storage silicone design Anti-slip silicone USB-C interface Anti-slip silicone Similarly, when you just want to charge your watch, you can fold up the wireless charger to take up the least amount of space for you and still charge your Apple Watch. Appearance after folding Compatible Devices iPhone 14 Pro Max/14 Pro/14 Plus/14/13Pro Max/13por/13mini/12Pro Max

/12por/12/12mini (and other magnetic phone wireless chargers) Apple Watch Series8/Uitra/SE/7/6/SE/5/4/3/2 AirPods Pro 2nd generation/Airpods/3rd generation/Pro/3/2 Indicator light description When the power is turned on, the blue light comes on(goes off in 2 seconds) and enters standby mode. When the watch is charging, the corresponding blue-blue light comes on and goes off after 20 seconds. When the phone is charging, the corresponding blue light comes on and goes off after 20 seconds. When the TWS headset is charging, the corresponding blue light will come on and go off after 20 seconds. When any of your devices are fully charged, the indicator light does not show When three devices are charging at the same time, all three lights will turn blue at the same time and go off after 20 seconds. The three blue lights will stay on when the wireless charger output is charging abnormally or when a foreign object is detected. When the product detects a foreign object, the three blue lights will keep flashing in the corresponding position. When your adapter or cable is low on power, it will not be able to charge any of the devices and the corresponding position will keep flashing.

(For the best charging experience, please use QC3.0/24W power adapter or a larger power adapter) Using instructions Turn on the power, the device will enter the standby state after the blue indicator flashes once. Place the Apple Watch in the stand charging area for wireless charger. Place the mobile phone with magnetic suction on the magnetic suction position for wireless fast charger. Connect the wireless charging headset to the headset charging slot for wireless charger. How to solve abnormal charging:

Please confirm whether your mobile phone has wireless charging function before use;

Check whether the phone deviates from the wireless inductive charging area of the charger;

Whether a non-metallic protective case is used for charging mobile phones, and the thickness of the protective case is recommended not to exceed 4mm;

When metal objects touch the charging area, the charger will automatically identify and provide power off protection. When the temperature of the charger is too high, it will automatically start the protection.Please unplug the power supply first and use it after the charger recovers the temperature. Q&A:

Q:Why is there heating in the charging of wireless charging inductive FCC Warning IC Caution:

This device complies with part 15 of the FCC Rules. Operation is subject to Radio Standards Specification RSS-Gen, issue 5 products?

the following two conditions: (1) this device may not cause harmful interference, A:During the charging process, there will be a certain loss of and (2) this device must accept any interference received, including interference magnetoelectric conversion, which will be converted into heat, that may cause undesired operation. causing the mobile phone and charger to generate heat, which is a normal phenomenon. Suggestions:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. When the device is fully charged, disconnect it from charging in NOTE: This equipment has been tested and found to comply with the limits for time to avoid a long cycle of charging, which may lead to continuous a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits heating of the device and charger;

are designed to provide reasonable protection against harmful interference in It is recommended to stop running the background software when a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. charging the phone. Safety Notes If this equipment does cause harmful interference to radio or television reception,

- French:

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following Cet appareil contient des metteurs / rcepteurs exempts de licence Use indoor or under dry environment, avoid placing or using in measures:

the environment of high temperature, humidity, strong static

-- Reorient or relocate the receiving antenna. electricity and strong magnetic field;

For your safety, please do not use wet hand plug and unplug electrical appliances;

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Avoid putting it in a place easily accessible to infants and children;

-- Consult the dealer or an experienced radio/TV technician for help. conformes aux RSS (RSS) d'Innovation, Sciences et Dveloppement conomique Canada. Le fonctionnement est soumis aux deux conditions suivantes:Cet appareil ne doit pas causer d'interfrences.Cet appareil doit accepter toutes les interfrences, y compris celles susceptibles de provoquer un fonctionnement indsirable de l'appareil.Dclaration d'exposition RF:L'quipement est conforme la limite d'exposition aux Do not use the product if it is contaminated with water or dirt;

Non-professional personnel are not allowed to open and repair without authorization. To maintain compliance with FCCs RF Exposure guidelines, This equipment radiations de la IC tablie pour un environnement non contrl. Cet should be installed and operated with minimum distance between 20cm the quipement doit tre install et utilis avec une distance minimale de 10cm radiator your body: Use only the supplied antenna. entre le radiateur et votre corps.

- English:

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:This device may not cause interference.This device must accept any interference, including interference that may cause undesired operation of the device. RF exposure statement:The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 10cm between the radiator and your body. Thank you for you choosing our product

Shenzhen Yifeng Intelligent Technology Co., Ltd. C5266091_X10_Ed.1 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2AXY5-M16 To Whom It May Concern, Date: 10/28/2022 Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No Short-Term Confidentiality No No No No No No No No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Ning Liu Date: 10/28/2022 Title: Manager 1/1