FCC ID: 2AXY5-M10 3-in-1 Magnetic Wireless Charging Stand

(M10 A01 2023.10.19 3-in-1 Magnetic Wireless Charging Stand Model: M10 It must be powered by a QC18W or PD20W adapter, otherwise you will experience a series of problems such as insufficient power supply, blinking lights and failure to charge. Folding tips Currently in fully folded condition

(suitable for carrying). Lift in the direction of the arrow to 65

(to get the best view). User Manual Thank you for choosing the 3 in 1 Magnetic Wireless Charging Station. Please read this user manual carefully before use and keep this manual in a safe place for future reference. Specifications 3-in-1 Magnetic Folding Wireless Charging Stand lnput: 9V 2A Phone output: 15W Max Earphone output: 5W Max Watch: 3W Max USB-C interface Break off from right to left and rotate to adjust by 90

(for charging the watch). Charge phone only Charge Earphones only Compatible Devices Important Safety Instructions Charging for Apple Watch only

(Magnetic)iPhone 15 Pro Max/15 Pro/15 Plus/15/

14 Pro Max/14 Pro/14 Plus/14/13 Pro Max/13 Pro/

13/13 mini/12 Pro Max/12 Pro/12/12 mini Apple Watch Series Ultra 2/9/8/Ultra/SE 2/7/6/SE/5/4/3/2 AirPods Pro 2nd Generation/AirPods 3/AirPods Pro MagSafe/

AirPods Pro/AirPods 2nd Generation Please use a magnetic case to charge your phone Please Note:

1. Only use certified QC 3.0/PD Charging Wall Adapter to charge the device, do not plug into computer USB port or any other non-certified USB port. 2. When charging, please use a magsefe case or a phone that supports magnetic attraction to charge. 3. a QC 3.0/PD adapter is required when charging mobile phones can be quickly charged 4. Make sure to disconnect the device from power when cleaning. 5. lt is normal and safe to hear a humming noise when very close to the charger. lt means that this wireless charger is adjusting its temperature to achieve a more efficient charging speed. 6. If your device can not be fully charged, this may due to high environmental temperature, please recharge after the temperature is lowered. Our charger has temperature control to safeguard your device when charging. Do not store device in high-temperature environment, including heat caused by intense sunlight or other forms of heat. Do not place device in fire or other excessively hot environments. Exposure to fire or temperature above 212F(100C) may cause explosion. Do not use the wireless charger in excess of its output rating. Over loading outputs above rating may result in a risk of fire or injury to persons. Do not expose the wireless charger to rain or snow. Do not modify, repair or disassemble the unity, if so, please contact the manufacturer. Switch off the wireless charger when not in use. The wireless charger will automatically switch off when disconnected from its wall charger. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC Warning FCC RF exposure statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body. 128 60*85*mm

(RoHS

C5266091_X24_Ed.2 Attestation Statements TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules for covered telecommunications equipment and video surveillance equipment produced by entities identified on the Commissions Covered List1, which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) that prohibit equipment authorization Applicant Company name: Shenzhen Yifeng Intelligent Technology Co., Ltd. FRN: 0030130181 Grantee code: 2AXY5 FCC ID:

Contact Name:

Address:

Cheng Street, Bao An District, Shenzhen.

+86 152 2007 0621 Telephone No:

Fax No:

+86-0755-33138690 Email: 3246968776@qq.com 2AXY5-M10 Ning Liu 201, Building 4, Sanwei Chaxi Industrial Zone, Sanwei Community, Hang i. ii.

[Shenzhen Yifeng Intelligent Technology Co., Ltd.] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification.

[Shenzhen Yifeng Intelligent Technology Co., Ltd.] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing covered equipment. The applicant must sign this certification. Shenzhen Yifeng Intelligent Technology Co., Ltd. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Date: 01.12.2024 Applicants Name: Ning Liu Title: Manager Signature 1 The Commissions Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commissions website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes covered equipment. https://www.fcc.gov/supplychain/coveredlist 1/1

Shenzhen Yifeng Intelligent Technology Co., Ltd. C5266091_X10_Ed.1 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2AXY5-M10 To Whom It May Concern, Date: 1/12/2024 Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No Short-Term Confidentiality No No No No No No No No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Ning Liu Date: 1/12/2024 Title: Manager 1/1

C5266091_X8_Ed.1 Letter of Authorization Company: Shenzhen Yifeng Intelligent Technology Co., Ltd. Address: 201, Building 4, Sanwei Chaxi Industrial Zone, Sanwei Community, Hang Cheng Street, Bao An District, Shenzhen. Product Name: 3-in-1 Magnetic Wireless Charging Stand Model Number: M10 FCC Identifier: 2AXY5-M10 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Ning Liu Date: 1/12/2024 Title: Manager Signature of applicant:

1/1

CFR 47 2.911 (d)(7) Agent Designation Attestation Date: 01-13-2024 FCC ID: 2AXY5-M10 FRN: 0030130181 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Shenzhen Yifeng Intelligent Technology Co., Ltd.(the applicant) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicants agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-

related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. U. S. Agent Information:

James He Oasis Compliance, Inc. 3313 Verdi Dr, San Jose, CA 95111 info@oasis-compliance.com cell:2026028330 Sincerely yours, Ning Liu Manager Shenzhen Yifeng Intelligent Technology Co., Ltd. Address: 201, Building 4, Sanwei Chaxi Industrial Zone, Sanwei Community, Hang Cheng Street, Bao An District, Shenzhen Email: 3246968776@qq.com Phone: +86 152 2007 0621