FCC ID: 2AXY5-T8 Wireless Charging

- Samsung Galaxy S20/ S20 Plus

/Note 9

/ Note 8 Samsung Watches: Galaxy Watch 3 45mm/41mm, Active 2/1, Gear S3, Watch 46mm/42mm, etc. How to distinguish between apple and Samsung, please check the logo on the position of the watch. Samsung System Apple System are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF exposure statement This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. FCC Warning This device complies with Part 18 and Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits

Reference No.: WTX21X04027734W

Page 1 of 16

ANNEX

EXHIBIT 1 - PRODUCT LABELING

Proposed FCC ID Label Format

Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where

it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently

durable to remain fully legible and intact on the device in all normal conditions of use throughout the device’s

expected lifetime.

Proposed Label Location on EUT

FCC ID Label

Location

Waltek Testing Group (Shenzhen) Co., Ltd.

Http://www.waltek.com.cn

Shenzhen Yifeng Intelligent Technology Co., Ltd. 10th Floor, Building 2, Chaxi, Zone B, Huafeng First Science Park, Hangcheng Street, Gushu, Baoan District, Shenzhen, China Date: 2021-07-09 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AXY5-T8&

Confidentiality Request To whom it may concern, Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of the information accompanying this application as outlined below:

Block Diagram Tune-Up Information

&] Operational Description Security Information

&] Schematics Software Defined Radio (SDR) O Parts List Information The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Shenzhen Yifeng Intelligent Technology Co., Ltd.

Shenzhen Yifeng Intelligent Technology Co., Ltd. 10th Floor, Building 2, Chaxi, Zone B, Huafeng First Science Park, Hangcheng Street, Gushu, Baoan District, Shenzhen, China

(FCC ID : 2AXY5-T8) POWER OF ATTORNEY DATE: 2021-07-09 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern:

We, the undersigned, hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Shenzhen Yifeng Intelligent Technology Co., Ltd. are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Shenzhen Yifeng Intelligent Technology Co., Ltd.

(Ning Liu)

(Manager)